Replacing Bulbs in Submersible Trailer Lights.
Updated 01/31/2015 | Published 01/30/2015
Question:
# ST16RB submergible trailer tail lights. I need to change the bulbs in them. How do I get the lens off
asked by: Frances D
0
Expert Reply:
On the # ST16RB trailer taillight, the lens is first removed by removing the 4 screws holding the lens to the lamp housing. Once the lens is removed, the 2057 bulb is easily removed by pushing the bulb into the socket, and twisting it a 1/4 turn, then pulling straight up.
expert reply by:
Mike L
0
Product Page this Question was Asked From
Optronics Combination Trailer Tail Light - Submersible - 7 Function - Incandescent - Passenger Side
- Trailer Lights
- Tail Lights
- Rear Clearance
- Rear Reflector
- Side Marker
- Side Reflector
- Stop
- Tail
- Turn
- Rectangle
- Surface Mount
- Submersible Lights
- Incandescent Light
- 8-1/16L x 2-7/8W Inch
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Trailer Taillight Lens with SAE STIAP2 04 DOT DOT Number On It
- Q&A: Correct Replacement Taillight for Trail Star Boat Trailer
- Q&A: Changing the Bulb in the Wesbar Tail Light Capsule
- Q&A: Does Trailer Tire And Wheel Combos Need To Be Balanced?
- Q&A: Replacement Taillights For Trailer With SAE AP2 04 DOT Number
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Wiring Diagrams
- Q&A: Will Optronics Fleet LED Trailer Tail Lights Fit 2002 Doolittle Cargo Trailer
- Q&A: How to Find Replacement for Hadco 322 Hubs
- Article: Trailer Lighting Requirements
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Boat Trailer Guides: Which are the Best?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)