Troubleshooting PL Code on a Prodigy Brake Controller
Published 12/26/2014 >
Question:
Hello, I have a prodigy brake controller that has worked flawlessly for the past 12 years and now it will display a PL code. The manual states it is a power interruption while braking. I checked the power wiring and fuses and all looks good. Is there a circuit breaker in the system that could be providing power but under load it s? Any help would be appreciated. Thanks
asked by: Lee K
Expert Reply:
The PL code will be displayed when the Prodigy loses voltage on the black wire while either the brake pedal or the manual lever is being applied. This may be caused by a loose connection or I have also seen a faulty circuit breaker case this as well.
The circuit breaker I referred to would be on the power wire of the controller. The black wire of the controller should run through a circuit breaker and then to the positive side of the vehicle battery. You might try bypassing the circuit breaker and running the controller straight to the battery temporarily to see if the PL code goes away.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: rain guards
- Search Results: nylon bushings
- Shop: Brake Controller
- Search Results: 6 leaf slipper
- Shop: Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Search Results: rack`em
- Q&A: Raised Pintle Hitch Mount With 25000 lb Capacity
- Search Results: pintle hitch
- Search Results: pintle hitches
- Search Results: tekonsha 90195 p3 electronic brake control
- Shop: Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire with 15" Silver Mod Wheel - 5 on 4-1/2
- Shop: Kenda Karrier KR53 ST235/80R16 Radial Trailer Tire with 16" Silver Mod Wheel - 8 on 6-1/2
- Q&A: How Difficult is it to Install a Brake Controller for a 2008 GMC Yukon Denali
- Q&A: installing Brake Controller for 2008 GMC Yukon Denali
- Shop: Buyers Products Weld-On Receiver Tube with 2" Hitch Receiver - 24" Long - 20K
- Shop: Nylon Bushings - 9/16" Inner Diameter, 3/4" Outer Diameter - 1-3/4" Long - Qty 6
- Video: An In-Depth Look at the Buyers Products 3 Position Pintle Hook Mount for 2-1/2" Receiver
- Video: The Low-Down on the Curt Pintle Hook
- Video: Ultimate Overview of the Curt SecureLatch Adjustable Pintle Mounting Plate for 2" Hitches
- Video: A Closer Look at the B&W Tow & Stow Pintle Hook for 2-1/2" Hitches
- Video: Review of B and W Trailer Hitch Ball Mount - Tow Stow Pintle Hook Combo 2-1/2 Inch - BW77BR
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: 18-Gauge 2-Wire Bonded Wire - 40'
- Video: Review of Demco Adjustable Trailer Coupler - Coupler Only - DM15791-81
- Shop: Gooseneck Hitch
- Article: Troubleshooting Brake Controller Installations
- Q&A: What Does the PL Error Code Mean on a Tekonsha P2 Trailer Brake Controller, 2004 Dodge Ram
