Custom Fit 2024 Nissan Rogue Accessories

I would be happy to! To add a hitch to your 2024 Nissan Rogue, I recommend the etrailer item #e93ZR. This hitch is custom fit and bolts to your Nissan with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs…

Hey Lutz, 8-10" is quite a big ask. The closest I was able to find is the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise #HT5R which will go into a 1 1/4" receiver and convert it to a 2" and also give you…

Hey Terry! The Inno Square Bar Roof Rack #IN88YR will definitely be able to handle kayaks on your 2021 Nissan Rogue and comes with everything you need for installation. Keep in mind, you will be limited by the 220 lb capacity of the rack or your…

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

Hi Tom, First, that's a reallllllly nice bike you have, and we can get you set up with an equally high-quality rack to accommodate both it and your wife's step-through with fenders. Due to the fenders, what you'll need is a bike rack that…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Your picture didn't make it through but in general the RockyMounts MonoRail part #RKY10004 can't be used with a bike that has fenders and instead you'd need a bike that uses a frame clamp instead like the Thule EasyFold XT part #TH903202.…

For bikes that have fenders the best solution is a bike rack that grabs the bikes by the frame instead like the Thule DoubleTrack Pro XT part #TH92BJ. The tire mount styles of bike racks like the part #RKY10004 grab the front tire right where the…

Drilling is not required, and you will not need to trim or cut any part of the bumper fascia on your 2023 Nissan Rogue to install either the etrailer or Curt trailer hitches that fit. The hitches that fit are the following part numbers: - etrailer…

Yes, the etrailer.com hitch part #E98907 is the same design as the Curt hitch part #C13205 available for the 2019 Nissan Murano except the etrailer.com hitch is matte black and the Curt is glossy. I have attached photos of the Curt hitch on a 2018…

That hitch does stick out pretty far on your 2021 Nissan Rogue! I can certainly understand wanting something a bit more recessed. We have the Curt hitch #C24HR which is much more recessed like you can see in the picture I attached. I could be wrong…

When it comes to our class III hitch selection for your 2021 Nissan Rogue, we carry the following options: - Draw-Tite Max-Frame Trailer Hitch Receiver #DT85MR - Curt Trailer Hitch Receiver #C24HR - etrailer Trailer Hitch Receiver #e93ZR With these…