Hey Stefano, yes the LowBed kit part #MAL33TR is all that you need to convert your Malone Microsport #MPG460XT to a LowBed style trailer. The Yakima DeepSpace part #Y65RR is also compatible with the 2nd Tier Kit part #MPG474 too. How come you are…
Hello David, thanks for reaching out. The Spare Tire for Malone MicroSport Trailer #MPG465 will indeed mount to the Malone LowBed MicroSport Trailer #MPG464-LB. The spare tire carrier comes with a u-bolt that attaches to the 3" x 2" tongue…
Hi Tom, For a single-bike rack with a true 2" shank I recommend the Kuat Piston SR Bike Rack for 1 Bike #KU88ZR. This bike rack is rated for use on all vehicles, 5th wheels, motorhomes, travel trailers, and flat towed vehicles so you'll be…
Hey William. All we would have is the grease cap. We don't do hub caps so hopefully this is what you mean. The Malone MicroSport trailer uses a 1.98" dust cap so you would need item #F001518. If you have any additional questions go ahead and…
The Malone XtraLight Trailer that you referenced does have bumpers on the rear of it but it does not have the retractable tongue like you mentioned so instead you'd want the part #MPG460XT which I attached a picture of in the storage position.…
The Retractable Tongue Kit for Malone MicroSport Trailers #MPG494 that you mention will unfortunately not work with the Malone MicroSport Trailer with J-Style Carriers for 4 Kayaks #MPG462G2. This kit is designed to upgrade the Malone MicroSport…
The Malone MicroSportXT Trailer - 13' Long - 78" Crossbars - Retractable Tongue - 800 lbs #MPG460XT has crossbars that are 12 inches above the frame. I reached out to the manufacturer and they sent me the attached photo as well as stating…
I checked with Malone and the bumpers on the back of the MicroSport XT part #MPG460XT will hold the trailer frame 2 inches from the ground when it is in the vertical, stored position.
The distance between the top crossbar of your Malone Trailer #MPG460XT and the bottom of the bars on the 2nd Tier Kit part #MPG474 is 32 inches. I confirmed this with Malone.
I spoke with my contact at Malone who said that the coupler height of the Malone MicroSportXT Trailer #MPG460XT is 15". When we installed the Draw-Tite Max-Frame Trailer Hitch Receiver #76138 on a 2017 Mazda CX-5 the coupler height (from the…
While we do have a video of a trailer wiring harness installation on a 2012 Kia Sorento, it is not for the Curt T-Connector Vehicle Wiring Harness #C56328. Instead, the video we have, which I have linked for you below, is of an installation of the…
