2-9/16" Long shackle link connects double-eye leaf spring to the rear hanger or equalizer on trailer suspension systems. Shackling the 2 components together instead of bolting them directly allows for the necessary pivot of the springs.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at a Shackle Strap. This Shackle Strap connects your double eyes spring to a rear hangar on single axle trailers or to an equalizer on multi-axle trailers. The connection allows movement to take place, ensuring an evenly distributed load between the axles. When it comes to the measurements of the shackle strap, the length measurement is actually taken from the center of one hole to the center of the other. So if we place a ruler on there and we measure the separation of the hole center on center, you can see that it measures 2 9/16". Overall length, edge to edge is 3 7/8.
Overall measurement going this side or this way, edge to edge is 1 1/4". The bolt hole diameter is 9/16" and it's made from a durable steel construction. That's gonna do it for today's look at the Shackle Strap.
Good and heavy made
Should be described as "bare steel"
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.