Video Transcript for Review of Optronics Trailer Lights - Clearance Lights - OPT44NR

Hello, everybody. This is Jeff at etrailer.com. Today I'm gonna take a look at this Optronics LED Trailer Clearance Turn Signal or Side Marker Light with the Reflex Reflector in the Red Lens. Now, this is a rectangular LED trailer light that'll function as a side marker light, a clearance light, or a turn signal light. You can see, it is a red lens over three wide LEDs, and it does use a built-in reflex reflector to remove the need for a separate reflector. Now, I have this hooked up to some 12 volt power, and I do wanna show you the light.

So, what we're gonna do, is go ahead and turn on the 12 volt power. And there's your side marker light or clearance light. And then, we'll go ahead and turn off the overhead lights. And if you do hook it up as a turn signal light, you can see that it'll also offer the turn signal function. Now, they do use LEDs.

They do make great replacements for the incandescent lights, 'cause they'll last 50 times longer. They are more efficient, they provide brighter light with less power output, and of course, no bulbs to replace or (indistinct) to break. And the lifetime warranty on LEDs. Now, this is a durable, I'm gonna go ahead and disconnect it from our power here. The base on it is a durable black ABS plastic base.

The lens is a nice, easy snap-on acrylic lens. Very easy to replace. And again, this is compatible with 12 volt DC electrical systems. It is designed to mount onto the surface of the trailer. Now, the hardware installer is not included.

You can see, it offers a three wire pigtail, with the two power leads in the ground wire. And this light is DOT, Department of Transportation, compliant. It is also P2 rated. Few specs on this. The overall length, we'll get our ruler out here and we'll go to the back, overall length from one end to the other is right at four inches long. Height of it is two inches tall. And the total depth of it, one inch deep. Now, the distance between the mounting holes. These are the two mounting holes here that you mount. Center to center on those is right at three inches. And the power draw on this at 12.8 volts will be 0.06 amps. But that should do it for the review on this Optronics LED Trailer Clearance Turn Signal or Side Marker Light with the Reflex Reflector.