Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Say goodbye to struggling with your trailer connector thanks to the ergonomic handle design of the Hopkins Endurance Metal Trailer Connector. This feature not only makes gripping easier but also significantly improves the process of plugging into your tow vehicle. No more wrestling with stubborn connectors, this pistol grip is built for a smooth and quick connection, keeping your trailer securely in place.
For those who demand durability and reliability, the Hopkins connector delivers with its heavy-duty die-cast zinc housing. It’s built to withstand harsh weather conditions, ensuring that the connections remain intact and corrosion-free. This sturdy housing provides peace of mind, knowing that it can handle whatever nature throws at it, while you focus on the journey ahead.
Never worry about your trailer connector dragging on the ground or being exposed to dirt and moisture. The Hopkins Endurance Metal Trailer Connector comes with an included mounting bracket, keeping it secure and off the ground when not in use. This feature helps prolong the life of your connector by protecting it from unnecessary wear and tear.
Your connection is only as good as its weakest link, and with the Hopkins Endurance connector, weak links are a thing of the past. The weatherproofing feature keeps moisture out, and corrosion-resistant terminals ensure reliable conductivity. This combination guarantees a dependable connection despite challenging conditions, making it an optimal choice for both seasoned and occasional travelers.
Hooking up your trailer shouldn’t be overwhelming, and with the clear wiring configuration offered by this connector, it’s easier than ever. Color-coded terminals support right turn, left turn, ground, tail light, and side marker lights, as well as electric brake and auxiliary functions. This makes it simple to wire trailers correctly, reducing setup time and increasing reliability on the road.
If you’re upgrading from a 4-Flat or 5-Flat system, the Hopkins Endurance Metal Trailer Connector has you covered. As a trailer-side 7-way plug, it integrates seamlessly with most 7-way vehicle sockets, providing enhanced connectivity for larger or more complex trailer setups. It adds the capability needed for electric brakes and auxiliary power, ensuring your trailer is ready for any journey, big or small.
California residents: click here
Great product at very reasonable price. Already installed and works great.
Better quality than the cheap plastic ones. Crimp lugs make installation a lot easier.
I am enclosing 2 photos of trailer connector I purchased from etrailer. I have a 1995 Dutchman popup trailer. It had a 6 way round connector which would not fit my 2010 F150. By using your trailer connector diagrams, I was able to determine Dutchman was using white for the ground, blue for brakes, black for battery, brown for right turn/brake, red for left turn/brake, and green for tail lights. I replaced the 6 way with your 7 way connector.
Quality built product. This connector seems to take less effort to plug in to the 7-flat socket than others that I have installed. Metal housing provides great rigidity. I appreciate that they include the clip to stow the connector when not in use. If I could improve on it, I would prefer the manufacturer find a way to design the inside to be less obstructive to the 7 wires that have to pass through the middle. I use heavily insulated 7-wire harness, and had a difficult time squeezing everything in to the provided space. All said and done, very happy with the product and I do play on purchasing again next time I need another. I would recommend this to any professional installer. My application is 5 different trailers that include surge and electric brake assemblies in a fresh water marine environment on multiple types of vehicles. This produced is plugged and unplugged almost every day.
Replaced a plastic plug with this one and it is much better. The only issue I have with it is it is very difficult to get the plastic covers at the back to close up on the thick shielded cable I have the trailer wired with. Much easier to plug in and pull out of the truck connector
Hopkins S.
7/5/2017
Jeremy, Hopkins appreciates your business and is grateful you purchased our HM48510 Trailer Connector. If you have any concerns or questions, please get in contact with etrailer customer service.
I changed from hydraulic surge to electric, so I needed a new couple. The install was simple, and towing is much more solid by getting rid of the sloppy slide action coupler with the surge brakes.
Dave S.
7/17/2018
The conversion from hydraulic to electric is something I should have done when I first bought the trailer. The parts are working great! I want to say things are working better now than when the trailer was new. It pulls easier, sways less, and stops with confidence.
Got this to replace prior plastic unit that had broken. Quality of unit was much better than prior. Only issue was that one internal lug was stripped out and had to use a nut behind the lug to secure the wire. Best alternative I have found to cheaper plastic units.
Chris
5/29/2017
Still working as expected.
Absolutely horrible to wire up. There is not enough room in the pistol grip for the six wires. Worst plug wire up experience ever.
While this seems like a quality product, it will NOT fit the typical 6- or 7-conductor pigtail cable found on most larger trailers and RVs. I tried modifying it by cutting away some of the internal plastic ribs, but I still can't get the backshell to clamp down properly. It may work fine for trailers that use a smaller cable. I do like the storage clip, so I'll be using that since I can't return mine anyway. I'll be ordering a complete replacement cable with molded connector to repair my trailer.
I have installed this plug and my only problem is that the plastic connector at the rear has a limited amount of room for the wires. The Power chair lift has 2 #10 Wires for Power and 2 #10 wires for Ground plus the Normal Break and tail light wires. I could not use the Rubber in the rear at all and barely was able to get the wires to clear to install the plastic sides. The connector otherwise is well made and I really like the bracket to hold the plug when not in use. Thank you George and etrailer for your rapid response.
This plug works great once it is wired in. The only problem I have with it is that it does not receive the wire in a way that makes it easy to assemble, and I'm talking about the housing at the rear of the plug. The connection points are very easy to make up. Once you finally get it all together. It is very durable and weather proof.
Chad W.
5/29/2014
As a follow up, its been a year and I have not had any problems with this product.
Pros: metal body, rubber moisture o-ring, hanger included.
Cons: the "pistol" grip is made of plastic and when 7 wires are in place the screw stripped out of the plastic almost immediately as it has only 3-4 threads into the receiving cover.
30 year auto/electric technician and towing experience. Hoping to salvage it with a longer screw and external nut slightly recessed into the plastic cover.
Was a bit in doubt about the plastic end piece being robust enough but after wiring and using this connector, I am impressed.
The product is well thought out and well made. The folks at Etrailer are the best. George did a great job and the communication was superb.
best connector on the market !!!!!
Kenny K.
7/16/2019
Still going strong !!
Very heavy duty. Looks great and works well. Only thing I would like is more room to run wires. Remember to run half of your wires on each side of the metal divider inside the plastic handle. I made this mistake and ended up with some broken insulation and needed to repair.
finding the item was fast an easy on your web site and the shipping of the item was unreal, I received the item in approximately two days. This is the second time I ordered from etrailer.com and am extremely happy with the prompt service in filling my order
very sturdy 7 way plug. a snug fit storage cover would be a nice addition to this kit.
The Hopkins Metal Connector is an excellent product, the only issue I had is with the packing/instructions. All of the poles were NOT identified in the instruction diagram; there were arrows pointing to them, but no letter code denoting what connection they were intended for; such as RT, BU, TM, Acc, etc. Some poles were identified but not all of them.
This is to replace an old plastic connector on my Silver Streak trailer. This one has a metal case so it should live much longer than the old plastic one. Wires connect much easier on this design. Thank you for a great product.
It's been a long while since I've ordered anything from etrailer, but, as usual, you folks came through in flying colors. The package was boxed well, shipped on time and the correct products, that's a real plus in today's internet shopping zone.
Received part and installed on trailer. Checked wiring to be in correct position and all works great. Thank you.
Great Item. like having the holder for the connector, I need to show family and friends why the holder is there:)
Works great, Very easy to install. The rubber plug in the back is the only difficult part to deal with. I Place a dab of silicone around it to make a better water proof fit.
Routing the wires is very tight and the small screw that holds the 2 halves together at the back stripped out very easily. I made a fix and haven't had any problems with it.
The tip is robust and looks strong, but the grip design and the way the wire has to flow through it was absolutely useless for my application. This is junk that will be going in the trash and I will be looking elsewhere.
Do you have a question about this Trailer Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Cody
3/13/2019
Excellent corrosion resistance, this product is easily Industrial quality.