See what our Experts say about this MORryde Trailer Suspension Parts

• How To Choose Correct MORryde Shackle Upgrade Kit
  In order to choose the correct MORryde Shackle Upgrade Kit you'll need to know the length of your shackle straps. If you have 2-1/4" long shackle straps then you can use part # MR86ZR or if you have 3-1/8" long shackle straps you can use part # MR26ZR. These are the two most popular sizes.
  view full answer...
• Upgraded Suspension Parts for 5th Wheel Triple Axle 5200 Pound Axles on 2006 Eclipse Attitude 33aks
  Hello Ken. For upgrading your suspension on your 2006 Eclipse Attitude 33aks I recommend starting with the MORryde Suspension Upgrade Kit for Triple Axle Trailers - 3-1/8" Long Shackle Straps # MR26ZR. There isn't a data base that I can reference because there isn't an industry standard when they are putting the 5th wheels together, with that being said you are going to want to double check the measurements on your current shackle straps that they are 3 1/8" from center hole to center...
  view full answer...
• Galvanized Idler Hub That Fits Square #84 Spindle
  Let's start with the spindle and hub you asked about, and they are indeed compatible. Reason why is this spindle accepts hubs with inner bearing L68149 and outer bearing L44649, which is exactly what the Easy Grease hub you mentioned uses, so the two will work together: - Square #84 Spindle for 3,500-lb Trailer Axles # TRU47FR - Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K And as for the hanger kit and leaf springs you mentioned,...
  view full answer...
• Troubleshooting Equalizers Rock Forward When Trailer Sitting Level and Leaf Springs Touch Frame
  Hi Colton; are you replacing the leaf springs as well? Is that what you mean when you say you have 4 springs 25-1/4"ish for front and rear and 26" for the rear? Replacing the equalizers isn't a bad idea while you're working on this but I don't see that being the main issue. It sounds like your leaf springs are completely worn out which is throwing everything off while allowing them to contact the trailer frame. Replacing them will likely solve your problems. Unless you have changed the...
  view full answer...
• Hub/Drum and Upgraded Equalizers for 2018 Jayco Seismic 4212
  Hey Kris, the hub/drum replacement you'll need is the part # 42866UC3-EZ for your 2018 Jayco Seismic 4212. Then for brake assemblies you would want the part # AKEBRK-7-SA. Then for the MORryde kit you'd want the part # MR39ZR for the equalizers. Then for the shackle kit the part # MR26ZR is what you'd need.
  view full answer...
• Recommended Equalizer Upgrade for a Triple Axle Trailer
  Hey Zack I don't have a database that shows me what wheel base your 2016 Genesis Supreme Toy Hauler has but it's pretty easy to find out. You'll just want to measure from the center of one of the wheels to the center of the next wheel. I do have a couple of equalizer sets that will be a solid upgrade though. The first one works with trailer's that have a 33" wheelbase. It is the MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers item # MR59ZR. The second one works...
  view full answer...
• Replacement Leaf Springs, Equalizers, and Wet Bolt Kit for a Triple Axle Trailer
  Hey Jeremy. I have all of the parts you'll need but I am going to need you to take a couple of measurements. There's no database that shows me what parts you have on your toy hauler. To replace your springs, I'll need you to jack up one side of the trailer(or both) and get the bolt hole to bolt measurement off of one of your leaf springs. They tend to stretch out over years of use and this is the only accurate way, other than a part number, to find out what size you need. I'll also need...
  view full answer...
• Replacement MORryde CRE3000 Equalizers and Wet Bolts For 2019 Heartland Cyclone 4270 5TH Wheel
  Your 2019 Heartland Cyclone model 4270 5th wheel is going to need the 35" Equalizers # MR39ZR like you found. You can verify this if you like by measuring from the center of the center wheel to the center of the front and rear axles. You will also need the MORryde Suspension Upgrade Kit # MR26ZR.
  view full answer...
• Replacement Hangers, Equalizer, U-Bolts, Springs For a 2015 Keystone Carbon 327 5TH Wheel Toy Hauler
  Thank you the pictures are a great help. I recommend using the MORryde AllTrek 4000 Equalizers # MR29DR with the MORryde Suspension Upgrade Kit for Triple Axle Trailers - 3-1/8" # MR26ZR for your 2015 Keystone Carbon 327 5th wheel camper. These straps are much thicker than the thin straps you got from the factory so they will not elongate like your current straps which now measure 1/8" longer. We have the 3-1/4" Hanger # 28-5 which will work as a replacement for your front, center or rear...
  view full answer...
  
• Availability of Upgraded Shackles and Equalizers for 2020 Heartland Cyclone 4007 5th Wheel
  For upgraded shackles on your 2020 Heartland Cyclone 4007 5th wheel I recommend one of our suspension upgrade kits. In order to select the correct kit you will need to know the length of your current shackles. If you have 2-1/4" shackle straps you need the MORryde Suspension Upgrade Kit for Triple Axle Trailers # MR86ZR and for 3-1/8" shackles you need the # MR26ZR. These kits come with heavy-duty shackle straps along with wet bolts and bronze bushings. Regarding the Road Armor # LC696740,...
  view full answer...
  
• Different Size Equalizers on Triple Axle Trailer
  The equalizers on your triple axle setup will not be identical and there is nothing to worry about with your hanger spacing. However, since they appear to be worn it may be a good idea to go ahead and upgrade them. It looks like the Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Triple Axle - 6,000 lbs # K71-656-00 is the closest match to what you have right now. As you can see in the kit, and others like it, there is a difference between the two sets of equalizers. The shorter...
  view full answer...
  
• Recommended Shackles and Suspension Upgrade for a Triple Axle Toy Hauler
  The closest option we have to replace your 2-5/8" shackles is the 3-1/8" long MORryde Suspension Upgrade Kit for Triple Axle Trailers item # MR26ZR. Using the longer shackle straps will slightly raise your trailer but these will still work. If you would like to email me the dimensions of your current equalizers I will be happy to recommend a replacement so you can upgrade those as well. If you are looking for a complete suspension upgrade then I recommend the Roadmaster Comfort Ride...
  view full answer...
• Replacement Leaf Springs, Equalizers, Shackles and Wet Bolts for 2017 Grand Design Reflection 29RS
  Grand Design lists several possible axles for your 2017 Grand Design Reflection 29RS so you will need to identify which you have to get the correct parts. You should be able to find this information on the axle tag. What I can tell you is that whichever capacity you have the correct replacement leaf springs measure 26" spring eye to spring eye. If you have one of the 5,200 lb axles you can use the following: -6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long - Dacromet # e88SR These...
  view full answer...
• Upgraded Equalizers and Wet Bolts For a Triple Axle Camper With 33" Wheel Center Spacings
  I recommend upgrading to the MORryde Shock Absorbing Suspension Equalizers # MR59ZR for your triple axle 5th wheel camper. These are designed for axle spacings of 33". You will need to select one of the wet bolt kits from the list below. There are kits for trailers using correct track hangers that are adjustable. Then you will need to measure your current shackle straps and replace with the closest length. These are measured from center of bolt hole to center of bolt hole. MORryde Suspension...
  view full answer...
• Replacement Suspension Components For a 2015 Keystone Carbon 327 5TH Wheel Toy Hauler
  I do see your 2015 Keystone Carbon 327 5th wheel toy hauler comes equipped with 7,000lb axles. I recommend going with the AllTrek 4000 Equalizers # MR29DR since you are replacing your suspension components. This is a superior equalizer to the Equa-flex # LC145546 style you are using. You should also add either the MORryde X-Factor Crossmember # MR33WR or Drop Crossmember # MR84AR if you have any sewer or other components that interfere with the standard crossmember. This will provide more...
  view full answer...
• Recommended Thicker Shackles for Lippert Triple Axle Equal-Flex Equalizers
  The MORryde Suspension Upgrade Kit for Triple Axle Trailers part # MR86ZR for 2-1/4" or part # MR26ZR for 3-1/8" is an upgrade kit you can use to obtain thicker shackles. It also comes with new bushings and wet bolts which will really give your suspension a makeover. They will work with the existing Lippert Equa-Flex Equalizers.
  view full answer...
  
• Determining The Correct MORryde CRE3000 Equalizers For Triple Axle Trailer W/ 33" Axle Spacing
  Since your 2016 Forest River Vengeance Model 39R12 has 33" axle spacing and triple axles the # MR59ZR will likely work just fine for you, but you will need to take a few measurements first. The first measurement is from the bolt hole in the rear frame hanger to the front frame hanger, you will need to have a measurement of at least 91-7/8" for this system to work correctly. The second measurement is from the frame to the bolt hole in your hangers. If your hangers are at least 4-1/4"...
  view full answer...
• Wet Bolt Suspension Upgrade Kit For 2005 Weekend Warrion 5TH Wheel Triple Axle Trailer
  The MORryde Suspension Upgrade Kit # MR26ZR is designed to be used with the MORryde Rubber Equalizers for Triple Axle Trailers # MR39ZR. This equalizer kit only requires 6 sets of shackles as it removes one set of the shackles and allows the leaf spring to mount directly to the equalizer. If you are not upgrading your equalizer then 2 of the MORryde Suspension Upgrade Kits # MR76ZR that are designed for tandem axles will give you the 8 sets of shackle straps you are needing for your 2005...
  view full answer...
• Replacement 6-Leaf, 7,000LB Double Eye Spring For a 2012 Dutchman Voltage 3950 Toy Hauler
  The 6-Leaf Double-Eye Spring # e64SR is currently our only 7,000lb spring we carry. This has an eye to eye measurement of 24-7/8". Since the springs on your 2012 Dutchman Voltage 3950 are likely sagging over the years of use you will want to measure the length of your spring from the center of the eye to the pin in the center of the leaf spring along the radius. If you come up with 13-3/16" this is going to be the correct spring for you. I recommend replacing your shackle straps and bolts...
  view full answer...
• Should Shackles Always Angle Upwards And How To Correct If The Angle Is Off
  Thank you for the pictures. The shackles should always be pointing up at about a 45 degree angle towards the axle. There is not a specific angle set in stone, but they should should make a "W" shape at all times. They appear to be positioned correctly in your first picture. However in pictures 2 and 3, something is definitely off. The shackle should never hang below the equalizer like that. I have also attached a picture showing an example of how they should be positioned. Now the shape...
  view full answer...
  
• Triple Axle Leaf Spring And Wet Bolt Upgrade For 2020 Keystone Fuzion Impact 415
  I have a solution for you. We currently do not have the Lippert Road Armor for triple axles, however we do have the Equa-Flex Cushioned Equalizers - Double Eye Springs - Triple Axle - 5K to 8K # LC279689. These are a Lippert product and act in the same way as the road armor. They do look different but do the same job. For your wet bolt upgrade I recommend, depending on your shackle strap length, the MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps #...
  view full answer...
• How to Pick Out MoRryde Suspension Upgrade Kit for Shackle Straps
  Measure the shackle strap lengths from hole center to hole center and you'll know which kit to get. If the distance is 2-1/4 inches long you'd want the part # MR86ZR or if they are instead 3-1/8 inches you'd want the part # MR26ZR. Those are the only two length options available.
  view full answer...
• Replacement Leaf Springs For a 2020 Grand Design Reflection 28BH 5TH Wheel RV Camper
  With your springs being 26" long while loaded you most likely have 25-1/4" Springs # e34SR on your 2020 Grand Design Reflection 5th wheel. These particular springs are rated for 6,000lb axles. With your Grand Design having a GVWR of 10,995lbs these are the best option. Be sure to check your shackles as manufacturers do not always add the thicker shackles and wet bolts which are much better for your suspension. You will need either one of the kits below depending on your shackle length...
  view full answer...
• How to Find Wet Bolt Kit For Triple Axle Toy Hauler
  All you need to do is measure the shackle strap length on your toy hauler to find the correct wet bolt kit. You'll want the shackle straps to be the same length (or as close to it as possible), and there are two options for that: - MORryde Suspension Upgrade Kit for Triple Axle Trailers - 3-1/8" Long Shackle Straps # MR26ZR - MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps # MR86ZR
  view full answer...

Do you have a question about this Trailer Suspension Part?