See what our Experts say about this CE Smith Boat Trailer Parts

• I Am Looking For 8 Foot Long Bunk-Style Guide Ons For My Boat Trailer
  Hey Kenneth, The bunk-style guide on kit # CE27600 have 5 foot long bunk boards in them. The can be adjusted to fit different size trailer frames, but the actual length of the bunk board is not custom. The longest bunk board that we carry is 7 feet long # CE27845, we do not have any that are longer than that. An option you could do if the 7 foot long boards would work is to use the bracket kit # CE27600K90 with the bunk boards # CE27845 to apply to your trailer. If you do in fact need...
  view full answer...
• Will the CE Smith Bunk-Style Guide-On Kit Work With 1-1/2" x 3-1/4" C-Channel Frame
  Yes, the CE Smith Bunk-Style Guide-On Kit part # CE27600K90 will work just fine on c-channel frames and the 1-1/2" wide x 3-1/4" tall dimensions will not be a problem either.
  view full answer...
• Where to Drill Holes for CE Smith Bunk-Style Guide-On Kit
  Hi John; there is no specific position you need to drill the holes for the swivel brackets on the # CE27600K90. Choose a position that works best for your setup which is likely toward the top. The swivel brackets use a 1/2" bolt, I would hold up your drill bits to the bolt to match it up like you would with anything else.
  view full answer...
• Bunk Kit CE27600K90 - What Are The Dimensions Of The 90 Degree Uprights?
  I was able to track down some measurements for the 90 degree uprights that are included with the # CE27600K90 bunk kit. Hope this helps. See below: A: Internal Distance - 15-1/2" A: External Distance - 17" B: Internal Distance - 18" B: External Distance - 19-1/2"
  view full answer...
  
• Availability Of 90 Degree Guide-On Upright For a Boat Trailer
  It sounds like you may be needing a kit like the CE Smith Bunk-Style Guide-On Kit # CE27600K90. We do have just the Upright # CE27608PG and Mounting Bracket # CES94FR individually if that is all you are needing. The U-Bolt Kit # CES44FR will allow you to attach the upright and bracket to a frame up to 3" wide by 4" tall.
  view full answer...
• CE Smith Bunk-Style Guide-On Compatibility with Pontoon Boat Trailer
  Yes, the CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60" Long - 1 Pair # CE27600 can work on the inside of a pontoon boat. Based on the photo you may prefer the CE Smith 90-Degree Bunk Board Guide-On Kit # CE27600K90 which will includes marine grade carpet in two 12 foot long rolls for treated 2x4 boards of your desired length.
  view full answer...
  
• Inner Pontoon Boat Bunk Style Guide-Ons For Boat Trailer or Boat Lift
  Yes, you can use the CE Smith Bunk-Style Guide-On Kit # CE27600K90 for the inside pontoons on your cradle lift. You will want to ensure that the uprights will not interfere with anything under your boat when on the lift. The uprights are 19-3/4" tall from the frame rail and have no pre drilled holes for the hardware. The included hardware will fit frames up to 3" wide x 4-1/2" tall. A Extra-Long U-Bolt Kit # CE11416 will fit a frame up to 3" wide x 5-1/4" tall. Or CE Smith I-Beam Clamps...
  view full answer...
  
• Bunk Board Guide On Kit Recommendation for Trailer with Wider Outside Frame Channels
  Since the outside frame channel on your trailer is about as wide as your boat you'd need to go with a guide on that has a 90 degree angle for the upright posts instead like the part # CE27600K90 so that you'll get closer contact like you need.
  view full answer...
  
• CE Smith Bunk Guide-On's For Interior Tunnel Of Catamaran Or Pontoon Boat Trailer
  Yes, the CE Smith Bunk-Style Guide-On Kit # CE27600K90 can be used as in interior tunnel guide on for your catamaran boat trailer. The L beams are 19-3/4" long and have no pre drilled holes. The kit will include mounting hardware to attach the uprights to a 3" wide by 4-1/2" tall frame. For an I-Beam style frame like in your picture you will need 2 sets of CE Smith I-Beam Clamps # CE27682A to attach to the perpendicular I-Beam that is 2-1/2" to 4-1/2" wide.
  view full answer...
  
• Bunk-Style Guide-On Kit for 5" x 3" Boat Trailer Frame
  The CE Smith Bunk-Style Guide-On Kit for Boat Trailers # CE27600K90 fits 3" x 4-1/2" frames but can fit your 5" x 3" framing if you get the Extra-Long U-Bolt Kit # CE11416 as well. We don't offer this kit with the longer U-Bolts automatically because the large frame you have isn't as standard so it isn't needed as often. Attached is a review video for you to check out.
  view full answer...
• Recommended Roller Bunks for Boat Trailer to Ease Launching and Loading Boat and Bunk Guides
  The best option for your boat to move better on and off your trailer is to use the Dutton-Lainson Boat Trailer Deluxe Roller Bunks # DL21741. These rollers make loading and launching your boat easy. They are available in 4 and 5 foot lengths, so I've linked a page to assist. You will also need the roller bunk brackets like # DL21742. The attached video will also help you with the installation and operation. One note is that we recommend having a rope attached to your boat when using...
  view full answer...
• Availability of 90-Degree Guide Ons for Pontoon Boat
  The guide-ons we have available that are designed specifically for pontoon boats, such as the CE Smith Bunk Style Guide-Ons # CE27671, do all feature a slight angle where the board attaches. I recommend taking a look at the CE Smith 90-Degree Bunk Board Guide-On Kit # CE27600K90. This is the only 90-degree kit we have available and it is essentially designed so that you can make your own bunk board boat guide ons, specific to your particular boat. It includes two rolls of weather-resistant...
  view full answer...
• Boat Trailer Guides Needed for Triple Axle Boat Trailer
  Choosing the correct guides is a little different for each boat/trailer combo but we do have a few options that you can choose from. I recommend going with either the CE Smith Bunk-Style Guide-On Kit # CE27600K90 where you supply your own 2x4 boards to fit your application, or the smaller 24" CE Smith Bunk-Style Guide-Ons # CE27660 which you could place at the front and back of each fender. These options fit frames up to 3" wide x 4-1/4" tall but it looks like you have a rather tall trailer...
  view full answer...
• Lower Profile Bunk Guide Kit For A 2021 G3 Bay 18 DLX
  For your 2021 G3 Bay 18 DLX, the closest option we can offer is the CE Smith Bunkboard Guide-On Kit # CE27600K75, which has 75° posts and will create a more "tucked-in" look, as oppose to the 90° kit # CE27600K90.
  view full answer...
• 90 Degree Boat Bunk Guide On Recommendation
  We have the 90 degree roller style of guide ons which would be your best option with the part # CE27600K90. This uses a roller that mounts vertically and will roll as it allows your boat to guide along past it. There isn't a 90 degree version of the # CE27660 that you referenced.
  view full answer...
• Which Guide-Ons are Going to Work Best For a Sea-Doo Switch Sport 18?
  This can actually vary from trailer to trailer. The CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers # CE27672 is a great option but the height may be an issue depending on your trailer. These are 24" tall so you will want to measure to determine if they will be short enough to not hit the bottom of your Sea-Doo Switch Sport 18. If that is the case the Bunk-Style Guide-On Kit # CE27600K90 you found would be the best option.
  view full answer...
• Are Tubes Mounted at Angle When Installing CE Smith Bunk-Style Guide-On Kit CE27600K90
  The tubes are 90 degrees, so as long as your boat trailer's frame is level and the U-bolts are properly fastened, there should not be an angle pointing upwards for the CE Smith Bunk-Style Guide-On Kit for Boat Trailers - 90 Degree Posts - Pre-Galvanized # CE27600K90. The # CE27600K90 comes with U-bolts to fit trailer frames up to 3" wide x 4-1/2" tall, but if your frame is up to 5-1/4" tall you can use the Extra-Long U-Bolt Kit # CE11416.
  view full answer...
• Should the CE Smith Bunk-Style Guide-On Kit CE27600K90 Be Positioned at the Front or Rear of Trailer
  I find its best to have the CE Smith Bunk-Style Guide-On Kit # CE27600K90 mounted near the rear of the trailer as it will help to ensure the pontoon is going onto the trailer straight and will help to align the pontoon to sit correctly on the bunk boards or rollers you have on the trailer.
  view full answer...
• Availability of Guide-On Bunk Bracket Kit
  The CE Smith Bunk Board Guide-On Kit, part # CE27600K75 includes everything necessary to install bunks up to 12 feet long, including the 70° posts, carpet, brackets and mounting hardware. The mounting hardware is compatible with frame members up to 3 inches wide by 4-1/2 inches tall. For 90° posts, use # CE27600K90.
  view full answer...

Do you have a question about this Boat Trailer Part?