To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you need a hitch that can handle serious loads, this one is ready. It’s rated for up to 16,000 lbs gross trailer weight and 1,600 lbs tongue weight, whether you’re towing a trailer or using weight distribution. The 2" x 2" receiver opening fits standard towing accessories, so you can hook up your gear without extra adapters. The heavy-duty steel construction gives you confidence every time you tow.
No welding is needed to get this hitch in place. It uses a bolt-on installation with included Grade 8 mounting hardware, so you can mount it securely using basic tools. The interlocking 3-piece design helps everything line up cleanly during install, which means less time under the truck and more time on the road.
The high-gloss black powder coat finish resists corrosion and keeps the hitch looking sharp after miles of towing. Built-in safety chain loops are welded into heavy-duty steel gussets for extra strength when hooking up your trailer. An electrical bracket is also included so you can mount a 7-way connector where it’s easiest to reach.
With its sturdy steel build and lifetime limited warranty, this hitch is made for years of towing—whether it’s hauling work trailers or heading out with your camper. It’s the kind of setup that feels solid every time you hook up, giving you peace of mind mile after mile.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Got here on time, packaged nicely
Very pleased, works as designed.
Not overly impressed I would have thought BW would of been beefier but it does the job
I worked out great I bolted it right on I had no issues whatsoever still works just fine
Easy to install, fit perfectly with no mods, no drilling and no welding, complete hardware, heavy duty
Hitch was here ahead of time Great serv ice
Solid made product as expected when purchasing from etrailer. Easy to install.
Fit like it should, fast shipping
looks like it going to work great being installed with a new flatbed on a 2003 dodge ram diesel
Very nice hitch. Took me about 3 hours to remove factory hitch and install this one. No drilling but did have to cut off one tail pipe support hanger.
Super easy to install.
Delivery was quick.
Fit perfectly. It slung under the stock receiver and aftermarket bumper.
I liked the three piece assembly. It was easy to install one piece at a time in lieu of having to try to install a heavy bulky one piece unit. I was also able to leave everything loose to insure everything lined up.
Had a bit of confusion with the smaller tabs and their locations.
Suggestions:
Need better locking washers. I had three spit out.
Better tabs. A number of them buckled when tightening the bolts.
It's installed with the four bolts, however, I'll be drilling the third hole on each frame rail for piece of mind.
Very easy to install, no drilling. Mounted right up below the OEM hitch.
Vehicle 2008 Ram 2500 Mega 4x4
Hitch went on my 04 ram 3500 and it installed easy and tows anything I throw at it. Great hitch and looks good.
Support from etrailer is top notch. I’ve ordered several products from trailer and any questions or follow ups were expertly handled. Look forward to continuing business with this company
It went on easy , and works very good. I'm happy,I put it on because I have a 3 foot extention on to,clear the back of my,11.5 camper so,I can tow my boat.
Floyd
7/31/2022
It works very good Ive had no problems since it was installed
This hitch is first class. As a contractor, I have owned many hitch receivers over the years. Fit my 2007 Big Horn Ram perfectly. This is precision crafted. I had it on in less than an hour.
Thank for a great product. I had my order faster than expected, and saved $200 bucks on it across the board!
Dan W
Installed this on a 2007 Dodge 2500.
Very nice hitch, looks like it will do exactly what I need it to. Very easy to install, took about 2 hours by myself. Instructions were spot on.
The only thing I can say is I wish they would have included 4 of the fish wires, would have made it just a little easier to install all the bolts onto the frame. But besides that, everything was included.
I have a 2008 Dodge Ram 1500. I had one issue while installing...there are two exhaust support bars that welded to the frame and one is in the way of the side plate. I just cut the inside bar and the install was very simple install afterwards. There are no exhaust issues with cutting the one bar. The hitch is a little heavy so if you can get assistance, that will help but not needed.
Great product, fit perfectly and installed just as described in the instructions. Interactions with etrailer were great as well, and super quick delivery.
Bruce
10/13/2019
It has done everything perfectly. I couldnt be happier.
I ordered this hitch for a couple of reasons. First it had to be bolted together (as opposed to one completely welded unit) in three pieces so I thought it was something a senior citizen could handle unassisted. Indeed that turned out to be the case.
Second I liked the option of being able to flip the cross bar to accommodate a factory hitch or not. Since my truck ('05 RAM 1500, Quad cab) had a factory hitch, there was some question about which to order to allow the new receiver to be as close to the bumper as possible. As it turned out, mine was the factory bolt on receiver so the "without" would have worked (I was able to unbolt it and set it aside). This one hitch fit either truck, with/without the factory hitch so I didn't have to worry about ordering the wrong one and then shipping it back.
And lastly, this is a heavy duty hitch, rated to pull about 16,000 lbs. It fit neatly under the truck and allowed the under-body spare tire to be stowed after installation. It is a snug fit but no modifications were necessary.
I do have a couple of suggestions for future DIY'ers. First don't snug any of the bolts until all the hardware is installed. I had snugged (not torqued) the wings and then realized that a trim piece had to be removed to install bolts to the side of the wings. Second, after all the hardware is installed but not tightened, return the under-body spare tire to it's position. There is a little wiggle room and now's the time to find out if it's needed before tightening and torquing the bolts.
James
1/27/2021
Great. No issues or problems. Been on several trips from flatlands to mountains.
Product was outstanding good quality, but hardware could be a little better seemed kind of cheap and lock washers were garbage. Installation was tight but went well. Definitely only hand tighten everything until final assembly. happy with purchase.
Very easy to install and very strong. My only complaint would be that they should have sent grade 8 locking washers rather than the cheap ones and I wish I could have found a hitch that was a little more hidden. But as far as what it is and it's ease of installation. This hitch is great.
I have a 2008 Dodge Ram 1500 Quad Cab, 2WD, 4.7L V8, with the Big Horn Package.This is a good hitch. I didn't need this much of a hitch. I only needed a 600 lb. tongue weight hitch but I figured better safe than sorry. It was the most hitch for the money and now I don't have to change the hitch if I get a bigger camper. I will never need a hitch with this kind of capacity. The install was very easy with one exception... There was no frame drilling required, but there were two steel dowels welded to the frame that supported a tail-pipe hanger and one got in the way and had to be removed. I was hesitant to do this, but the exhaust is still remarkably stable even with one of the supports cut-off. This hitch seems like the most hitch for your money and I know that the hitch will handle more than my truck is rated for so there is no worrying if my hitch will hold up.
Great quality Hitch. Very sturdy and made in the USA!
Easy installation, Fits as it should.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victoria H.
4/12/2025
Thanks for the great feedback Scott! Glad the fit and three-piece design made install easier and appreciate the notes on the tabs and washers, those are solid suggestions. Sounds like you’ve got a good plan for peace of mind. Thanks again for taking the time to share your experience, and we'll be here to help if you ever need anything in the future.