Leaf-spring mounting kit includes 2-1/2" tall front hangers, 3-1/4" tall center hangers, 2-1/2" tall rear hangers and necessary hardware. Equalizers are 7-3/4" long. Components for mounting axle to springs sold separately.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the tandem-axle trailer hanger kit for double-eye springs. This leaf spring mounting kit includes your equalizers, your front, center and rear hangers as well as necessary hardware for the installation. Now, components for mounting the axle to the springs are sold separately. This kit is designed for use on trailers with tandem 2,000-pound to 7,000-pound axles. This kit would be great for building a new trailer, rebuilding an old trailer, repairing or upgrading your trailer's suspension system. The hangers and the shackle straps are made from a durable steel construction. The hangers are designed to be a weld-on installation.
Located at the top of each hanger you're going to notice two holes. These are for spot welds. This kit attached four leaf springs to your trailer frame. We're just going to go over the components that are included with the kit. You're going to get four 2-1/2-inch tall hangers, two for the front and two for the rear.
Two of them act as front hangers, the other two act as rear hangers. The 2-1/2-inch tall measurement is measured from the center of the 9/16-inch diameter hole to the top of the hanger. Then you're also going to get two 3-1/4-inch tall center hangers, 3-1/4-inch measurements taken from the center of the 9/16-inch diameter hole to the top of the hanger. The kit also comes with your equalizers. These are going to be two 7-3/4-inch long curved equalizers with 9/16-inch diameter center and end holes. The 7-3/4-inch measurement comes from measuring from the center of one outer hole to the center of the other outer hole, so center-on-center 7-3/4 inches.
You're going to get your shackle straps. You're going to get eight of these and they measure 2-5/8 of an inch long. That's measured from the center of one hole to the center of the other hole. Then you're also going to get the bolts and locknuts. You're going to get fourteen 3-inch long by 9/16-inch diameter shackle bolts and fourteen 9/16-inch diameter locknuts. The center hangers are going to suspend the equalizers from the trailer frame and at each end of the equalizers connects to one end of the leaf springs with the included hardware and shackle straps.
Then the other ends of the leaf springs connect directly to the front and rear hangers with the included hardware. That's going to do it for today's look at the tandem axle trailer hanger kit for double-eye springs.
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.