New Arrivals

Drop in a Companion and skip the rails. This custom underbed kit gives you a clean fifth-wheel setup that clears the bed when you're done. Flip the ball, pull the hitch, and haul whatevers next - no rails, no drama, just a solid setup that works.

• 5th Wheel Hitch Rails
• Custom
• Below the Bed
• B and W

Go the extra mile with your Tow & Stow ball mount - from the field to the job site, back to weekends camping with the family - by adding this 2-tang clevis. Just attach it to your ball mount's shank with your existing pins.

• Clevis Hitch
• Clevis Adapter
• 2-1/2 Inch Hitch Mount
• No Shank
• B and W

The Continuum is so quiet, you might forget its there. This system works with your standard coupler and a 2-1/2" hitch, plus its 4" extended pin block adds extra drop for lifted trucks or low trailers.

• Weight Distribution Hitch
• WD With Sway Control
• Hydraulic System
• Fits 6 Inch Frame
• Fits 5 Inch Frame
• Includes Shank
• Top-Mount
• Allows Backing Up
• 1000 lbs
• 1300 lbs
• 1100 lbs
• 1400 lbs
• 1200 lbs
• 800 lbs
• 900 lbs
• 1500 lbs
• 700 lbs
• B and W

This small cabinet strike replaces the cabinet strike in your RV's cabinet. This will keep your cabinet doors from flying open when your traveling down the road.

• RV Cabinet and Drawer Hardware
• Cabinet Hardware
• Catches
• Catch and Strikes
• JR Products

Run out of room in your vehicle for your gear? We've paired the Curt cargo carrier with our etrailer cage so you can toss your stuff in, lock it up, and forget it. And, if you pack the cage tight you won't need to strap anything down!

• Hitch Cargo Carrier
• Enclosed Carrier
• Fixed Carrier
• 24 Inch Wide
• Heavy Duty
• Fits 2 Inch Hitch
• Class III
• Class IV
• Steel
• etrailer

Tired of your trailer tossing you around? Curt's Helux pin box smooths things out with a tough coil spring that beats air bags and torsion setups. It's maintenance-free, easy to use, and won't put your RV's frame warranty at risk.

• 5th Wheel Pin Box
• Upgraded Pin Box
• Absorbs Road Shock and Reduces Chucking
• 24000 lbs GTW
• CURT

This winch was made to handle your 20' boat. It's rated at 3,200 lbs and offers 2 cranking speeds so you can get the torque you need to manuever your boat onto the trailer. The zinc plating makes it resistant to corrosion.

• Trailer Winch
• Standard Hand Winch
• Boat Trailer Winch
• Extra Heavy Duty
• Standard Hand Crank
• Two Speed Winch
• CURT

100' spool of 7-way trailer cable with six 12-gauge wires and one 10-gauge wire. Features color-coded conductors, abrasion-resistant jacket, flexible stranded core, and meets SAE J-1128 standards for durable, high-capacity trailer wiring.

• Wiring
• Wire
• Jacketed Wire
• 7 Wire
• 12 Gauge
• CURT

Tired of your trailer tossing you around? Curt's Helux pin box smooths things out with a tough coil spring that beats air bags and torsion setups. It's maintenance-free, easy to use, and won't put your RV's frame warranty at risk.

• 5th Wheel Pin Box
• Upgraded Pin Box
• Absorbs Road Shock and Reduces Chucking
• 18000 lbs GTW
• CURT

Built-in sway control keeps your trailer in line by using specific tension points and steel-on-steel resistance. System head tilt adjustment feature eliminates the need for washers. 2-5/16" Ball and adjustable 2" shank included.

• Weight Distribution Hitch
• WD With Sway Control
• Trunnion Bar
• Fits 6 Inch Frame
• Fits 3 Inch Frame
• Fits 5 Inch Frame
• Fits 4 Inch Frame
• Includes Shank
• Top-Mount
• Allows Backing Up
• 1100 lbs
• 1000 lbs
• 900 lbs
• CURT

This winch was made to handle your 20' boat. It's rated at 2,600 lbs and offers 2 cranking speeds so you can get the torque you need to manuever your boat onto the trailer. The zinc plating makes it resistant to corrosion.

• Trailer Winch
• Standard Hand Winch
• Boat Trailer Winch
• Heavy Duty
• Standard Hand Crank
• Two Speed Winch
• CURT

Built-in sway control keeps your trailer in line by using specific tension points and steel-on-steel resistance. System head tilt adjustment feature eliminates the need for washers. 2-5/16" Ball and adjustable 2" shank included.

• Weight Distribution Hitch
• WD With Sway Control
• Trunnion Bar
• Fits 3 Inch Frame
• Fits 4 Inch Frame
• Fits 5 Inch Frame
• Fits 6 Inch Frame
• Includes Shank
• Top-Mount
• Allows Backing Up
• 400 lbs
• 600 lbs
• 500 lbs
• 700 lbs
• CURT

Lift and hoist your equipment safely with this winch rated for 1,000 lbs with a built-in handbrake. It's especially ideal for light lifting towers. Made of zinc, it's super corrosion resistant.

• Trailer Winch
• Brake Hand Winch
• Boat Trailer Winch
• Car Trailer Winch
• Utility Winch
• Light Duty
• Standard Hand Crank
• Single Speed Winch
• CURT

• Gooseneck Coupler
• Coupler with Outer and Inner Tube
• Round Tube
• 20000 lbs GTW
• 2-5/16 Inch Gooseneck Ball
• CURT

A-frame coupler features a thumb latch for safe, easy hookup. Simply push latch down and slide forward or back to open or close ball socket. Durable, zinc finish offers superior corrosion resistance and is perfect for boat trailers.

• A-Frame Trailer Coupler
• Standard Coupler
• Weld-On
• 14000 lbs GTW
• 2-5/16 Inch Ball Coupler
• etrailer

Brush insert works with Counteract stud cleaning tools (CA97FR - sold separately) to quickly clean rusted and corroded 18mm wheel studs.

• Wheel and Tire Cleaner
• Stud Brush
• Counteract

Working on multiple trailers? This wrap cuts drag at the ramp so your boats glide on and off with less effort. And with 250' to work with, you'll have plenty of wrap for large-scale projects or for stocking your boat supply store.

• Boat Trailer Parts
• Bunks
• Trailer Bunk Carpet
• 6 Inch Wide
• 3000 Inch Long
• Caliber

Streamline loading and unloading your sled with these low-profile, friction-reducing trailer glides. Protects your deck from damage your carbides could cause and lets you steer easily while loading. And they interlock so you can customize your setup.

• Snowmobile Trailer Parts
• Traction Surface
• Glides
• 8 Pack
• 30 Inch Long
• Caliber

These strong ramps have a treaded surface and include wheel chocks to ensure safe use. Durable construction. Works with tires up to 10" wide.

• Car Ramps
• Service Ramps
• 13 Inch Wide
• 9 Inch Lift
• Lift Ramps
• 20000 lbs
• Caliber

Keep your boat looking sharp and loading smooth with this PVC bow roller. It installs fast, holds up well, and keeps your boat centered. And because it's non-marking, you'll spend less time scrubbing your hull and more time on the water.

• Boat Trailer Parts
• Rollers
• Spool Roller
• 2-3/4 Inch Diameter
• 3 Inch Long
• Fits 1/2 Inch Shaft
• Caliber

Wish you could use your snowmobile trailer to haul other things? These low-profile, friction-reducing trailer glides also provide traction so you can haul everything from your sled to your ATV while still saving your deck from damage carbides cause.

• Snowmobile Trailer Parts
• Traction Surface
• Glides
• 4 Pack
• 30 Inch Long
• Caliber

Tired of fighting with sticky bunks? Skip the carpet replacement with these marine slides from Caliber. They just screw over your carpet to help your boat glide off and onto the trailer with less strain, but let you keep the traditional look.

• Boat Trailer Parts
• Bunks
• Slides
• 1-1/2 Inch Wide
• 15 Inch Long
• Caliber

Whether your ski stances are 7" or 11", loading your snowmobile is so much easier with these glides. Suspends your carbides and reduces the friction between your skis and the floor so you can glide right into your trailer.

• Snowmobile Trailer Parts
• Traction Surface
• Glides
• 4 Pack
• 60 Inch Long
• Caliber

This flooring protects your trailer or garage floor from your outdoor toys. And it protects your stuff by getting it off the floor and letting it air out. Snap together for a floating floor, or screw down for a partial floating or fixed floor.

• Trailer Flooring
• Utility Mat
• 18L x 9W Inch
• Plastic
• 9 Square Feet
• Gray
• Caliber