New Arrivals
Square Direct Weld Jack - Drop Leg w/ Spring Return - Sidewind - 28-3/4" Lift - 12K
In Stock
Pull the front-facing plunger pin on this jack to release the drop leg for 13-3/4" of lift on top of the 15" of screw travel. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.
- Trailer Jack
- 5th Wheel Trailer
- Gooseneck Trailer
- Utility Trailer
- Car Hauler
- Enclosed Trailer
- Side-Mount Jacks
- Standard Grade
- 10001 lbs or More
- Manual Jack
- Weld-On
- With Rectangle Foot
- RAM
etrailer Trailer Tool Box - A-Frame - Aluminum - 6 Cu Ft - 34" Long - Matte Black
In Stock
With a locking tool box mounted to your trailer, you can keep your straps, jack, tools, and other gear organized. The gas strut holds the lid open leaving your hands free to grab what you need, and the powder coated aluminum finish resists corrosion.
- Trailer Tool Box
- Trailer Tongue Box
- A-Frame Trailer Tool Box
- 22 Inch Tall
- Aluminum
- Medium Capacity
- 34 Inch Long
- Black
- etrailer
Boat Trailer Winch w/ 23' Strap - 9-7/8" Handle - 1,000 lbs
In Stock
Get your boat loaded and unloaded onto your trailer with this manual ratcheting winch. Zinc finish resists rust, making it ideal for marine use. Strap included.
- Trailer Winch
- Standard Winch
- Boat Trailer Winch
- Standard Duty
- Ratcheting Hand Crank
- Single Speed Winch
- Polyester Strap
- etrailer
etrailer Rust-Resistant 6-Leaf Slipper Spring w/ Hook End - 8K Axles - 29-1/2" - Dacromet
In Stock
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant slipper leaf spring.
- Trailer Suspension Parts
- Trailer Leaf Springs
- Slipper Springs
- Hook End
- 8000 lbs
- 2 Inch Wide
- 29-1/2 Inch Long
- Dacromet
- etrailer
etrailer Ball Mount w/ Pre-Torqued 2" Ball - 1-1/4" Hitch - 3-7/8" Rise - 3,500 lbs
In Stock
Pop it into your hitch and tow - no assembly required! This ball mount's 4" rise is perfect if you're towing with a vehicle that has very little ground clearance. Includes 2 layers of rust protection and a black nickel-plated ball.
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- One Ball
- 2 Inch Ball
- Steel Shank - Matte Black
- Rise - 3 Inch
- 3500 lbs GTW
- Pre-Torqued
- etrailer
etrailer RV Solar Panel Kit - PWM Solar Controller - 195 Watt Solar Panel
In Stock
This is a popular kit for those looking to get into solar and DIYers looking for an RV upgrade project. It will be great for battery charging between campouts, and we'll help when you are ready to add more panels for more power to camp off grid.
- RV Solar Panels
- Roof Mounted Solar Kit
- Rigid Panels
- 200 Watts
- 10.1 Amps or More
- AGM
- Flooded Lead Acid
- Lithium - liFePO4
- Gel
- 55-1/2L x 27-11/16W Inch
- 1 Panel
- etrailer
Boat Trailer Winch - 10-1/2" Handle - 1,600 lbs
In Stock
Get your boat loaded and unloaded onto your trailer with this manual ratcheting winch. Zinc finish resists rust, making it ideal for marine use. Strap not included.
- Trailer Winch
- Standard Hand Winch
- Boat Trailer Winch
- Standard Duty
- Ratcheting Hand Crank
- Single Speed Winch
- etrailer
Dexter Swing-Away Coupler Hinge Kit for 3" x 4" Tongue - Weld On
Use this with actuators or standard couplers to build a foldaway tongue that tucks your trailer neatly out of the way, perfect for tight garages. Weld-on mounting creates a clean look. Easy storage, clean style, and solid function.
- Folding Trailer Tongue
- Coupler Hinge Kit
- Weld-On
- Dexter
3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 3,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
- Trailer Suspension Parts
- Trailer Leaf Springs
- Double Eye Springs
- 3500 lbs
- 1-3/4 Inch Wide
- 23-1/8 Inch Long
- Painted
- Dexter
Torflex Lift Kit - Single Axle - 2-7/8" Lift
In Stock
Lift kit raises your trailer frame by 2-7/8". Kit includes spacers and mounting hardware for single axle applications. Compatible with side-mounted #11 Torflex axles with 4,100-6,000-lb capacities.
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Car Hauler
- Snowmobile Trailer
- Camper
- Utility Trailer
- Single Axle
- Dexter
Dexter Axle Grease Cap, 1.988" OD Drive In - Qty 2
Grease caps fit trailer hubs with 1.99" inner diameter and has corrosion-resistant zinc plating.
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.99 Inch O.D.
- Dexter Axle
Dexter Bearing Kit for 1-1/16" BTR Spindle
In Stock
Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing and outer bearing (L44649), inner race and outer race (L44610), grease seal, and a cotter pin.
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- Dexter
Dexter Single Hydraulic Jack System w/ Double Acting Pump - 12,000 lbs
Smooth and powerful hydraulic jack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.
- Trailer Jack
- Gooseneck Trailer
- Utility Trailer
- 5th Wheel Trailer
- Dump Trailer
- Enclosed Trailer
- Side-Mount Jacks
- 10001 lbs or More
- Hydraulic Jack
- Bolt-On
- With Rectangle Foot
- Dexter
3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 23-1/8" Long
In Stock
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
- Trailer Suspension Parts
- Trailer Leaf Springs
- Double Eye Springs
- 2500 lbs
- 1-3/4 Inch Wide
- 23-1/8 Inch Long
- Painted
- Dexter
Dexter Trailer Hub and Drum Assembly - 7K Axle - 12" - 8 on 6-1/2 - 5/8" Studs - Oil Bath
This hub-and-drum assembly fits 7,000-lb axles. Compatible with electric and hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, oil seal, oil cap, wheel bolts, and cone nuts included.
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Oil Bath
- 25580 / 14125A
- Standard Grade
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 17-1/2 Inch Wheel
- 16-1/2 Inch Wheel
- 16 Inch Wheel
- 17 Inch Wheel
- Dexter
5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-3/8" Long
In Stock
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
- Trailer Suspension Parts
- Trailer Leaf Springs
- Double Eye Springs
- 6000 lbs
- 1-3/4 Inch Wide
- 25-3/8 Inch Long
- Painted
- Dexter
Replacement Grease Caps for Dexter/Tie Down Engineering Vortex Trailer Hubs
Cap assemblies replace the grease caps on your Dexter or Tie Down Vortex trailer hubs. Includes 2 threaded caps that fit 2,500-lb to 4,200-lb hubs.
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- Dexter
Dexter Boat Trailer Axle - 89" Long - Galvanized
Lower your trailer deck for easier boat launches with this corrosion-resistant, galvanized drop axle. Ideal for marine use, it helps you launch in shallow water without sinking your truck or soaking your feet.
- Trailer Suspension Parts
- Trailer Axles
- Leaf Spring Suspension
- Marine Grade
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Drop - 4 Inch
- Dexter
Dexter Axle Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
Grease caps fit EZ lube trailer hubs with 2" inner diameter. Includes rubber lube plug for EZ Lube axles.
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 1.99 Inch O.D.
- Dexter Axle
Dexter Grease Seal for 12" x 2" Hubs - 2.25" ID - 3.376" OD - After 1998 - Qty 2
In Stock
Replace the grease seal on your Dexter 12" x 2" hub manufactured after 1998. Inner diameter measures 2.25". Outer diameter measures 3.376". Includes 2 seals.
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- Dexter
4-Leaf Double-Eye Spring for 2,800-lb Trailer Axles - 20-1/2" Long
In Stock
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,800-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
- Trailer Leaf Springs
- Trailer Suspension Parts
- Double Eye Springs
- 2800 lbs
- 1-3/4 Inch Wide
- 20-1/2 Inch Long
- Painted
- Dexter
6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
In Stock
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
- Trailer Suspension Parts
- Trailer Leaf Springs
- Double Eye Springs
- 7000 lbs
- 1-3/4 Inch Wide
- 24-7/8 Inch Long
- Painted
- Dexter
Dexter Boat Trailer Axle - 92" Long - Galvanized
Lower your trailer deck for easier boat launches with this corrosion-resistant, galvanized drop axle. Ideal for marine use, it helps you launch in shallow water without sinking your truck or soaking your feet.
- Trailer Suspension Parts
- Trailer Axles
- Leaf Spring Suspension
- Marine Grade
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Drop - 4 Inch
- Dexter
Dexter Trailer Idler Hub Assembly for 2,700-lb Axles - Pre-Greased - 5 on 4-1/2 - Galvanized
Rust-resistant kit replaces the hub on your trailer idler axle. Fits 2,700-lb axles. Inner bearing L44649, outer bearing L44649, grease seal, grease cap, cotter key, wheel bolts, and lug nuts included. Bearings and hub cavity come pre-greased.
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Marine Grade
- For 2700 lbs Axles
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 8 Inch Wheel
- Dexter