New Arrivals

Easily add a tie-down point to your truck with these Erickson stake pocket anchors. They install in your truck bed's stake pockets, safely handle a WLL of 2,000 pounds each and feature an attractive, chrome-plated finish.

• Tie Down Anchors
• Stake Pockets
• Stake Pocket Anchor
• 2000 lbs
• Truck Tie-Down Anchors
• Erickson

Get a safer, more gradual incline for loading your 4-wheeled equipment with low ground clearance onto your truck bed. Serrated aluminum panels give tires grip, even in wet weather. Ramps resist rust and come with safety straps.

• ATV Ramps
• Trailer Ramps
• Truck Ramps
• Ramp Set
• Fixed
• 9 Inch Wide
• 1000 lbs
• Flat
• Aluminum
• Erickson

Aluminum loading ramp plates can quickly convert two 2" x 8" x 8' boards into an inexpensive loading ramp set to roll your ATV, snowblower, lawn mower, etc., into your pickup truck bed or onto a trailer.

• Trailer Ramps
• Truck Ramps
• ATV Ramps
• Ramp Set
• Ramp Ends
• 8 Inch Wide
• 750 lbs
• Aluminum
• Erickson

This high-strength recovery rope helps you quickly and effectively recover a stuck car or Jeep. It transfers the kinetic energy of the tow vehicle into potential energy within the stretched rope to create the pull for snatch recovery.

• Tow Straps and Recovery Straps
• Recovery Strap
• Nylon
• 20 Feet Long
• 1/2 Inch Wide
• Reinforced Loops
• Standard Duty
• Erickson

This 4-leaf double-eye spring is 25-1/4" long x 1-3/4" wide. It is designed for use with 3,500-lb trailer axles.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Double Eye Springs
• 3500 lbs
• 1-3/4 Inch Wide
• 25-1/4 Inch Long
• EMCO

Folding ramp makes it easier for you to load ATVs, mowers, and other wheeled equipment into your truck or trailer on your own. The larger loading surface eliminates the need to align ramps with vehicle wheels. Reinforced hinges connect three ramps.

• Trailer Ramps
• ATV Ramps
• Truck Ramps
• Single Ramp
• Tri-Fold
• 45 Inch Wide
• 1500 lbs
• Flat
• Aluminum
• Erickson

Carry this tow strap with snap hooks in your truck or Jeep for emergency, short-distance tows. Durable polyester material resists cuts and abrasions so it's perfect for towing a tractor, truck, or any heavy vehicle. 10,000 lbs breaking strength.

• Tow Straps and Recovery Straps
• Tow Strap
• Polyester
• 20 Feet Long
• 2 Inch Wide
• Grab Hooks
• Standard Duty
• Erickson

Folding ramp makes it easier for you to load ATVs, mowers, and other wheeled equipment into your truck or trailer on your own. The larger loading surface with wider slats reduce risks while loading. Reinforced hinges connect three ramps.

• Trailer Ramps
• ATV Ramps
• Truck Ramps
• Single Ramp
• Tri-Fold
• 45 Inch Wide
• 1500 lbs
• Flat
• Aluminum
• Erickson

Standard-duty winch with 1.6-hp, permanent magnet motor and mechanical brake lets you quickly and safely recover a stuck ATV. Sealed motor, gearbox, and contactor protect winch from the elements. Hand-held remote and handlebar rocker mount included.

• Electric Winch
• ATV - UTV Winch
• 3-Stage Planetary Gear
• 1.0 HP
• 1001 - 2000 lbs
• 21 - 30 lbs
• Plug-In Remote
• Synthetic Rope
• Erickson

Loose cargo, shifting gear - no thanks! These ratchet straps hold strong without the bulk, with a comfortable rubber-grip handle and S-hooks that stay put while you tighten down. Simple, secure, and ready for the day's adventure.

• Ratchet Straps
• ATV-UTV Tie Downs
• Tie Down Straps
• Boat Tie Downs
• Motorcycle Tie Down Straps
• Cargo Carrier
• Truck Bed
• Roof Rack
• Trailer
• S-Hooks
• 2 Straps
• Manual
• 11 - 20 Feet Long
• 0 - 1 Inch Wide
• 851 - 1200 lbs
• Erickson

If you've ever watched a strap shift mid-haul or worried about gear bouncing loose on the road, you're not alone. This 4" ratchet strap was built for folks who haul heavy and expect their gear to hold up just as hard.

• ATV-UTV Tie Downs
• Boat Tie Downs
• Ratchet Straps
• Tie Down Straps
• Car Tie Down Straps
• Motorcycle Tie Down Straps
• Flatbed
• Trailer
• Truck Bed
• Flat Hooks
• 2 Straps
• Manual
• 21 - 30 Feet Long
• 3-1/8 Inch and Wider
• 10001 and Greater lbs
• Erickson

Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.

• Drop Hitch
• Trailer Hitch Ball Mount
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Gray
• Drop - 6 Inch
• 32000 lbs GTW
• Stacked Receivers
• Shock Absorbing
• Built-In Pintle Hook
• Gen-Y Hitch

This shock-absorbing pin box provides a smooth, safe ride while you tow your fifth-wheel trailer. The all-in-1 box has no air bags to refill or small parts to replace. The weight scale lets you monitor your vertical load. 8.5K pin weight.

• 5th Wheel Pin Box
• Upgraded Pin Box
• Absorbs Road Shock and Reduces Chucking
• 30000 lbs GTW
• Lippert 1621
• Lippert 1621HD
• Gen-Y Hitch

Get easy access to your truck bed, roof rack, van, or cargo area with this hitch-mounted step. 42" Wide step provides room for 2 people. Slides into your 2" hitch receiver. Serrated surface helps keep you from slipping off the step.

• Hitch Step
• Truck Bed Step
• Fixed Step
• Standard Step
• 3 Inch Deep
• 600 lbs
• 42 Inch Wide
• Steel
• Gen-Y Hitch

Insert this shock-absorbing, adjustable pintle plate mount into your hitch to get 7 mounting positions for your pintle hook. Flexing rubber cords limit shock. Included stabilizer deters wobble.

• Pintle Hitch
• Pintle Mounting Plate
• 21000 lbs GTW
• 2-1/2 Inch Hitch Mount
• Cushioned Shank
• Gen-Y Hitch

Get easy access to your truck bed, roof rack, or cargo area with this hitch-mounted step. Slides into your 2-1/2" hitch receiver with 3/4" accessory pin holes. Serrated surface helps keep you from slipping off the step.

• Truck Bed Step
• Hitch Step
• Fixed Step
• Standard Step
• 2 Inch Deep
• 500 lbs
• 13 Inch Wide
• Steel
• Gen-Y Hitch

Insert this heavy-duty mount into your 2-1/2" hitch to get 7 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Stabilizer kit ensures load is well distributed.

• Trailer Hitch Ball Mount
• Drop Hitch
• Adjustable Ball Mount
• Two Balls
• 2-5/16 Inch Ball
• 2 Inch Ball
• Steel Shank - Gray
• Drop - 18 Inch
• 21000 lbs GTW
• Stacked Receivers
• Built-In Pintle Hook
• Gen-Y Hitch

• Trailer Hitch Ball Mount
• Fixed Ball Mount
• One Ball
• Steel Shank - Matte Black
• 7000 lbs GTW
• Shock Absorbing
• Gen-Y Hitch

Insert this heavy-duty mount into your 2" hitch to get 5 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 2,000 lbs.

• Trailer Hitch Ball Mount
• Drop Hitch
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Gray
• Drop - 7 Inch
• Rise - 2 Inch
• 16000 lbs GTW
• Stacked Receivers
• Built-In Pintle Hook
• Gen-Y Hitch

Mount this coupler in an adjustable channel (sold separately) so you can hook up your trailer to your tow vehicle. SnapLatch ensures fast, easy, secure hookup and disconnect. Powder coated steel is sturdy and corrosion resistant.

• Adjustable Trailer Coupler
• Coupler Only
• 20000 lbs GTW
• 2-5/16 Inch Ball Coupler
• Gen-Y Hitch

Get easy access to your truck bed, roof rack, or cargo area with this hitch-mounted step. Slides into your 2-1/2" hitch receiver. Serrated surface helps keep you from slipping off the step.

• Truck Bed Step
• Hitch Step
• Fixed Step
• Standard Step
• 2 Inch Deep
• 600 lbs
• 13 Inch Wide
• Steel
• Gen-Y Hitch

Get a safer, more gradual incline for loading your vehicle or equipment onto your trailer with these extra-long ramps. Serrated aluminum panels let your wheels get a grip, even in wet weather. Each ramp can handle 7,000 lbs.

• Trailer Ramps
• ATV Ramps
• Car Ramps
• Loading Ramps
• 15 Inch Wide
• Car Hauler Ramps
• 14000 lbs
• Gen-Y Hitch

Keep your horses safe and comfortable in their trailer while you tow with this shock-absorbing gooseneck coupler. Offset design gives 2-1/2" of clearance between your cab and trailer. Use with standard 4" diameter square tube. 25K GTW.

• Gooseneck Coupler
• Coupler with Inner Tube Only
• Square Tube
• 4500 lbs TW
• 25000 lbs GTW
• 2-5/16 Inch Gooseneck Ball
• Shock Absorbing
• Gen-Y Hitch

Perfect for towing with your 1/2-ton truck or SUV, this hitch gives you 3 stacked 2" receivers for mounting the included ball mount or one of Gen-Y's other hitch-mounted accessories. Tow ball sold separately.

• Trailer HItch Ball Mount
• Drop Hitch
• Adjustable Ball Mount
• No Ball
• Steel Shank - Matte Black
• Rise - 4 Inch
• Drop - 4 Inch
• 10000 lbs GTW
• Stacked Receivers
• Gen-Y Hitch