Roof Rack Includes:
Part Numbers: TH712500,TH710601,TH95JW
SquareBar Evo crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.
Features:
Specs:
The SquareBar Evo crossbars let you create a sturdy, reliable roof rack for your vehicle. Each bar extends past the roof rack feet to maximize carrying capacity. The bars are constructed of galvanized steel so they're durable and rust resistant, and they have a polymer coating that helps prevent your cargo from sliding on the rack. The SquareBars require a Thule foot pack to mount the rack to your roof. If you have a vehicle with a naked roof you will also require a vehicle-specific fit kit .
Strong, Durable Construction
The SquareBars are made of heavy-duty, rust-resistant galvanized steel. They have a black polymer coating that provides extra grip to help prevent your cargo from sliding around while you're driving. The polymer coating also helps protect the bars against corrosion so you can leave the SquareBars on your roof year-round.
The bars have plastic endcaps that help keep out water and road debris, and they give your roof rack a finished look.
Hassle-Free Installation
Installation of the SquareBars is quick and easy, and you don't have to do any drilling or vehicle modification. The bars have bottom channels that that accommodate your Thule feet. Etched scales adjacent to the bottom channels let you place the feet in the proper location using the vehicle-specific measurements provided in your fit kit manual. Simply slide each foot to the measurement indicated in the fit kit manual, and place the rack on your vehicle.
For applications that don't require specific measurements provided in a fit kit manual - such as a raised rail - you can center the rack after you place it on your vehicle using a tape measure.
To complete installation on your roof simply tighten a single screw inside each foot using the torque tool included with the foot pack. This single attachment point enables you to secure the crossbar to the foot and the foot to your roof simultaneously.
Maximum Cargo Carrying Capacity
SquareBars are compatible with most accessories that clamp around roof rack bars, including bike, water, snow, and cargo carriers. The bars extend past the roof rack feet to maximize space for mounting accessories and carriers to your roof rack.
Heavy-duty feet let you mount 2 Thule crossbars securely to your vehicle with flush, factory side rails. Single attachment points let you tighten bars to feet and feet to vehicle simultaneously with included torque tool.
Features:
Specs:
Evo Flush feet let you mount 2 Thule crossbars to your vehicle with flush, factory side rails. Combine the feet and crossbars with a vehicle-specific fit kit to create a complete roof rack. The rack installs easily with the included torque tool.
Secure, Clamp-On Installation
Installing the fit kit onto the Evo Flush feet is quick and easy. Just remove the lockable covers, slide the inner and outer clips (sold separately) over the mounting bolt, screw on the socket head nut, and insert the mounting pads onto the bottoms of the feet.
Slidable scales on the WingBar Evo crossbars and the etched measurements on the bottom of the SquareBars help you center them on your roof. Simply slide the slot track guides on the feet into the bottom channels or T-slots of your Thule crossbars using the vehicle-specific measurements provided in your fit kit manual.
Note: ProBars do not have slidable scales or etched measurements. You'll need to measure foot placement from the center of the crossbars using a tape measure or ruler.
Place the fully assembled rack on your flush rails and tighten the feet in place with the included torque tool. The inner and outer clips in each foot tighten with a single mounting bolt to ensure an even, secure grip on your rails. An audible click indicates the rack is secured properly. Replace the lockable covers on the feet to complete installation.
One-Key System Locks
Evo Flush feet are compatible with Thule One-Key System lock cores (sold separately) that allow you to secure the rack to your roof. The One-Key System locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Thule products keyed alike.
These custom clips and pads let you mount Thule Evo Flush Rail or Edge Flush Rail feet on your vehicle with flush, factory side rails. Clips attach to a mounting bolt in the foot assembly and tighten together. Includes 4 clips and 4 pads.
Features:
Specs:
Secure, Clamp-On Installation
To complete installation, place the fully assembled rack on your flush rails and tighten the rack in place with the torque tool included with the feet. The inner and outer clips in each foot tighten with a single mounting bolt to ensure an even, secure grip on your rails. An audible click from the torque tool indicates the rack is secured properly.
Protection for Your Rails
The rubber-coated steel clips and molded rubber pads protect your side rails from scratches and abrasions. The pads easily slide onto the bottoms of each foot, and they're designed to fit the shape and contour of your vehicle's flush rails.
Average Customer Rating: 4.7 out of 5 stars (488 Customer Reviews)
SquareBar Evo crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars. Heavy-duty feet let you mount 2 Thule crossbars securely to your vehicle with flush, factory side rails. Single attachment points let you tighten bars to feet and feet to vehicle simultaneously with included torque tool. These custom clips and pads let you mount Thule Evo Flush Rail or Edge Flush Rail feet on your vehicle with flush, factory side rails. Clips attach to a mounting bolt in the foot assembly and tighten together. Includes 4 clips and 4 pads.Easy to assemble and install. Love the way etrailer packages everything you need and they all are correct for the vehicle you are mounting them on. Once installed they appear very strong. Installed on a 2023 Chevy Tahoe and did not interfere with the sunroof.
Very pleased with order. Shipped fast, not damaged, all parts accounted for. Easy install, very sturdy, and attractive design. Slight wind noise but that was expected compared to not having a roof rack.
We bought a new vehicle that we already had several Thule accessories for. Purchased the fit kit for our 2021 Tahoe along with the Flush Rail feet and they fit perfectly. This product title says “EVO” but it also fits “EDGE”. I hope etrailer fixes this because it was confusing trying to find the “EDGE” fit kit which doesn’t exist.
I put this on my Yukon with the square bars. I'm not sure if it is the feet or the bars, but this setup whistles loud. I have never had a roof rack this unpleasant. I may try aero bars, or just move to a different set up.
I ordered the Thule WingBar Evo Crossbars - Aluminum - Silver - 50" with the Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails and the Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet for my 2020 Mazda CX9. I appreciated the product selector to make sure I was getting all the correct parts. I was happy with the products, but I did run into an issue where 1 of the rail feet had a defective bolt which required a replacement. I was very satisfied with etrailer's customer support, and how well they worked with me to get the part replaced quickly. I'm giving this a 4 start only because of the hassle of receiving a defective one initially
Website is easy to use & is better at putting together the correct package than Thule’s site.
etrailer had all the parts in stock for my 2020 Kia Telluride.
Payment process was simple.
Received periodic updates from staffer on my order & could actually reply if needed.
Installing the roof rack went well. Estimate start to finish was about 2 hours. Found it best to really examine each diagram in Thule’s step by step instructions to get it all right on the first try.
Hardness part of the installation was getting the crossbars installed at the proper distances. A tailor’s soft measuring tape & some masking were great aids.
Beware of purchases from Etrailer...they offer no returns on opened products. So might say well you could just use and return it...true, but in this case the wind noise is horrific on my Jeep Wrangler and made a two hour ride nearly unbearable. The Thule cross bars are way too loud. They offer no aerodynamics whatsoever.
Once the mounting kit was installed, the fit was great. Too expensive though. etrailer ordering and shipping process was fantastic.
Thule Rack looks awesome on my Kia Telluride. Products took a while to get to me because they were on backorder but it's not etrailer, they were on backorder everywhere. I messed up one of the pieces of rubber while installing and etrailer sent me a new one at no charge. Definitely recommend etrailer.
Favorite bar Thule makes. Super solid.
This is the first top of the line roof rack system I have purchased. I never expected to have issues but this thing is so universal, with gaps everywhere, that I can’t get it to stop whistling. I wish I could return and get my money back. I really expected something better from such an expensive system.
Needed this part ASAP for a trip. Ups next day air and was in my hands in less than 24hours.
Fit Kit fit properly. Solid mounting s olution.
Solid roof rack, but get help from etrailer to make sure you get the core feet.
I’ve had it on my 2021 Kia Telluride now for a few months and it works great. When I was mounting the forward bar, I opened the sun roof to make sure I was comfortable with the roof window and bar clearance.
Thule makes great products
And etrailer makes it too easy to get when needed.
It was hard to know what to order. We ordered 2 kits and thought that would hook up to our roof top. But no we needed a 3rd kit. I guess some people only need repair kits. It would be helpful to have one complete kit and then other parts needed for things like a repair job. Was not very had to assemble once we had everything.
I went with this Rola Vortex Cargo Rack with extension for its size and multiple tie down points. I Paired it with the Thule 5 inch rapid gutter feet with square bars because:
To remove the freedom panels.
Square bars are stronger than Aero type bars.
Adjustability of fitment as the roof of the Jeep narrows toward the rear.
When loaded for camping, I want to maintain rearward vision.
Finally, the system met my load requirements. I had weighed the gear that will go onto the rack. And I am at OME specs.
I did not want to use the gutter of the freedom panels to carry weight. Since the panels are removable, it seemed to be a potential weak point structurally.
NOTES:
Because this Rola rack comes in sections, I do not recommend it for “Overlanding”.
And because it comes in sections, some weather proofing is needed. I coated the cargo rack guides with an anti seize grease. The bolts of the cargo clamps should be weather proofed as well.
Over time, the screws will need to be replaced. They will rust.
CONCLUSION
Overall I am happy with this set up. Should work well for general camping and hold up to the easier off road trails. If your plans are to Overland for weeks at a time in all weather conditions on moderate to difficult trails having off camber conditions, then this rack may be problematic over time. And may cause damage to the roof top.
I’d give a 4, since the rack is great, but the website picture gives the impression that there are core locks.
I spent a whole weekend looking for all these parts - no one had the entire kit in stock, they had one but not the other. I stumbled upon etrailer.com and was blown away by how easy they made the shopping experience - entered my vehicles info and they told me exactly what I needed! It doesn’t stop there, they also shipped my items within 3 days of ordering. I will definitely use them again when the time comes and recommend you do the same.
The bars are as advertised, but arrived 10 full days after you indicated, possibly a post office problem. But, the package only contained one of the 4 end caps for the bars. Please send the other three.
Excellent product. Arrived when promised. Very pleased. Thank you.
I have ordered quite a bit from Etrailer in the past, but this will be my last order. First, I ordered the Thule Gutter system and specifically ask if the old style square bars would fit the gutter system….answer was yes. In fact, it did not. Then had to order the Evo Square bars. They only come in 60”. Most of my orders come in within three days this order took 10 days, it was sent by snail mail. It arrived and the four end caps were not there and one of the bars had a bend in it. Had to reorder. These EVO bars suck. There is a slot you have to massage to get the bar into, very hard to adjust. Super disappointed in the product from Thule and the shipping service from etrailer. Hate to do it, back to [online stores] etc.
After initially ordering the wrong thing, we are very happy with our new racks on our Kia Telluride.
Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
Thule Accessories
Fit to this rack on your 2021 Chevrolet Suburban
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chevrolet Suburban Accessories
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.