Part Numbers: TH711400,TH710601
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.
Features:
Specs:
TheThule WingBar Evo crossbars let you quickly and easily build a quiet, aerodynamic custom roof rack for your vehicle. These high-end bars look great on any vehicle, and they are perfect for those who want a quiet roof rack that can carry plenty of gear. The bars have dual rubber strips in the T-slots and pivoting endcaps that allow you to easily mount carriers and accessories. Each bar extends past the feet to maximize carrying capacity. The bars are constructed of aluminum with internal BoxBeam structures that make them extremely durable yet lightweight. The WingBars require a Thule foot pack to mount the rack to your roof. Some vehicles - such as those with a naked roof - may also require a vehicle-specific fit kit .
Aerodynamic TrailEdge Design with WindDiffuser Strips
The WingBar's tapered TrailEdge shape helps reduce wind drag by separating the airflow over and under the bars so you won't see a reduction in your vehicle's gas mileage. This also dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack.
The rubber WindDiffuser strips in the T-slots have V-shaped ridges that direct air over the tops of the bars. This reduction in wind drag also helps maintain fuel efficiency and significantly reduces wind noise.
Channel-Mounted and Clamp-On Accessories
WingBar Evo crossbars have built-in T-slots with rubber strips that simply press into place. This makes them easier to install when compared with strips that have to be threaded into the channel from the end of the bar. The dual-strip design also makes accessories easier to install in the T-slots when compared with strips that have to be trimmed. Simply lift the SwingBlade endcaps open, slide your gear into the channel, and close the endcaps. These rubber strips also seal the gaps left by your accessories so that water and dirt don't get into the T-slots.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Strong, Durable Construction
The WingBar Evo crossbars are made of anodized aluminum with internal BoxBeam structures. These structures strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Installation of the WingBar Evo crossbars is quick and easy, and you don't have to do any drilling or vehicle modification. The bars have bottom channels that accommodate your Thule feet. SmartSlide sliding scales in the bottom channels let you place the feet in the proper location using the vehicle-specific measurements provided in your fit kit manual. Simply slide each scale to the measurement indicated in the fit kit manual, then slide the foot into the channel until it rests against the scale.
For applications that don't require specific measurements provided in a fit kit manual - such as a raised rail - you can center the rack after you place it on your vehicle using a tape measure. Then slide the scales against the feet to fill in the gaps in the channel.
Insert the included rubber filler strips into each channel between the outer edges of the feet and the ends of the bars, and trim the excess. These rubber strips, coupled with the sliding scales, help to keep dirt and water out of the bottom channels and help to reduce whistling.
To complete installation on your roof simply tighten a single screw inside each foot using the torque tool included with the foot pack. This single attachment point enables you to secure the crossbar to the foot and the foot to your roof simultaneously.
California residents: click here
Heavy-duty feet let you mount 2 Thule crossbars securely to your vehicle with flush, factory side rails. Single attachment points let you tighten bars to feet and feet to vehicle simultaneously with included torque tool.
Features:
Specs:
Evo Flush feet let you mount 2 Thule crossbars to your vehicle with flush, factory side rails. Combine the feet and crossbars with a vehicle-specific fit kit to create a complete roof rack. The rack installs easily with the included torque tool.
Secure, Clamp-On Installation
Installing the fit kit onto the Evo Flush feet is quick and easy. Just remove the lockable covers, slide the inner and outer clips (sold separately) over the mounting bolt, screw on the socket head nut, and insert the mounting pads onto the bottoms of the feet.
Slidable scales on the WingBar Evo crossbars and the etched measurements on the bottom of the SquareBars help you center them on your roof. Simply slide the slot track guides on the feet into the bottom channels or T-slots of your Thule crossbars using the vehicle-specific measurements provided in your fit kit manual.
Note: ProBars do not have slidable scales or etched measurements. You'll need to measure foot placement from the center of the crossbars using a tape measure or ruler.
Place the fully assembled rack on your flush rails and tighten the feet in place with the included torque tool. The inner and outer clips in each foot tighten with a single mounting bolt to ensure an even, secure grip on your rails. An audible click indicates the rack is secured properly. Replace the lockable covers on the feet to complete installation.
One-Key System Locks
Evo Flush feet are compatible with Thule One-Key System lock cores (sold separately) that allow you to secure the rack to your roof. The One-Key System locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Thule products keyed alike.
California residents: click here
Ask the Experts about this Accessories and Parts
Do you have a question about this Accessories and Parts?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.