Roof Rack Includes:
Part Numbers: INXB115-2,INXS100
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
Features:
Specs:
These low-profile Inno Aero crossbars let you build a stylish, aerodynamic roof rack for your vehicle. The crossbars require 4 Inno Flush or Through feet to mount the rack to your roof. You may also need a custom fit kit to mount the crossbars. Built-in T-slots in the tops of the bars let you easily mount carriers and accessories on the rack. Flexible rubber strips in the channels keep out dirt and require no trimming or adjustment. The crossbars are also constructed of strong yet lightweight aluminum so they won't rust.
These lightweight bars have an elliptical shape. This aerodynamic, low-profile design helps to reduce wind noise and drag when you drive. This means you won't need to add a fairing.
Inno Aero crossbars are constructed of sturdy, lightweight aluminum. Internal extrusions add strength and structural rigidity without adding a significant amount of weight. The bars are rustproof so you can leave them on your roof all year long, wherever you go. The sand-blasted powder coat finish resists corrosion, scuffs, and scratches. And the matte black color will look good on any vehicle.
Each crossbar has a channel in the bottom that lets you install Inno feet (sold separately). Slide the channel cover over to reveal a mounting hole for the foot. Clip the foot into the crossbar and then slide it into place along the channel. Built-in bar end stops in the channels will keep the feet from sliding off the ends of the bars.
To complete installation, mount the feet to your roof. This may require a custom fit kit (depending on your application). Attach the locking covers (included with the feet) to secure the roof rack to your vehicle. Locking the covers also secures T-slot-mounted accessories to your crossbars.
This bar has a built-in T-slot that allows you to mount bike racks, watersport carriers, ski racks, and more. The EZ-Slide rubber strip in the bar lets you mount accessories without the need to remove or trim the strip. Just press down on the ends of the flexible strip and slide your accessory's mounting hardware into the T-slot. This strip has a plastic coating so it's easy to slide T-bolts along the channel. The strip runs the full length of the bar, so it helps keep dirt out of the channel when you're not carrying accessories.
You can also attach most clamp-on accessories to the bar, and the rubber strip provides a no-slip cushion for any accessories that rest on it.
These Flush feet help mount 2 Inno Aero crossbars to your vehicle's factory raised side rails to create a streamlined roof rack. Steel straps wrap around rails and tighten with cam-action handles. Locking covers secure feet to side rails.
Features:
Specs:
Average Customer Rating: 4.8 out of 5 stars (328 Customer Reviews)
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming. These Flush feet help mount 2 Inno Aero crossbars to your vehicle's factory raised side rails to create a streamlined roof rack. Steel straps wrap around rails and tighten with cam-action handles. Locking covers secure feet to side rails.Aero roof rack is very stylish and gives my car a good look. It’s low profile look is what I really enjoy about it. The bars are pretty wide so any bars you do add to them, you’ll have to do IN-DEPTH research to make sure they do fit. I’ve had some run in with some issues with bike racks
By far the best service I have received in a very long time. I recieved my inno flush feet areo crossbars, sooner than expected and the assembly was just as specified. I especially liked having the video with the tutorial.
I like the look of the low profile and the quality is outstanding. I have used this for my kayak and the low profile helps with the loading and unloading.
I would highly recommend this product and Company.
I received my innov and installed it my 2017 nissan rogue and is so easy to install it & the quality of this product is 5 star..
1 Year of use and the Inno rails still solid - stealth - and quiet. Very easy to mount/remove as needed. Perfect choice in a saturated market of options. etrailer best out there for info - research - products- and price!
Everything about this kit met my expectations.
- Perfect fit for my Ford Edge, as advertised.
- Lowest bar height that was still high enough for the Edge Vista roof to clear. The glass does clear when nothing is attached to the bars.
- Aero bar shape. I haven't done a lot of miles yet with only the bars and no other attachments.
I attached an Inno roof box (which still fits through my garage door!) and did a 2000 mile road trip at insterstate speeds. Except the box noise (expected), and a bit of a mileage hit, I had no issues. Secure fit the whole way.
First off, eTrailer Rocks! The website, the reviews, the product tutorials, the fast shipping. This is my second purchase and i am now a loyal customer.
The Inno crossbars are exactly what i wanted for my 2013 Murano; the installation was simple thanks to the video instructions from eTrailer--and i'm very pleased with the fit, and the overall look.
Good racks, one year of frequent use and no problems. The instructions could have been clearer, but once I figured it out it was easy to install.
Fits great, sturdy, snug to the car. Exactly what you need, 5 stars.
Easy to install. Instructions are almost perfect. Watching the video really helped, especially the tip of laying the rails down and then marking the trim. I used a hacksaw to cut the trim, really easy. Thank you guys for an awesome product. I hope it is durable, it feels solid, but only time will tell.
Very happy with purchase. This third rack system I have purchased ( for different vehicles) and first Inno system. Seems every bit the quality of my Yakimas and like the attachment portion to roof rails, everything is coated so no possibility of scratching paint on car. Delivery was very quick and Etrailer price matched Amazon!
Easy to install - good fit - no compain ts
Hold well and fit perfectly in my Subar u.
The entire process was Easy Peasy! Ordering,excellent packaging, and easy install! I couldn't be happier; my hat is off to this fantastic company!!
Great product! Easy install. Highly rec ommended.
Just the right length for a very factory look. Love it.
These are fine
Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
Inno Accessories
Fit to this rack on your 2009 Acura MDX
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.