Detail K2 Elite Snowplow for 2" Hitches - 84" Wide x 22" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: K2AVAL8422ELT,31198
Retail:$2,825.94
Our Price: $2,496.45
You Save: $329.49
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Detail K2 Elite Snowplow for 2" Hitches - 84" Wide x 22" Tall
part number: K2AVAL8422ELT
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab.
Features:
- Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
- Electric actuator raises and lowers plow smoothly and consistently
- Wireless remote control lets you operate plow from the warmth of your cab
- Internal clutch prevents damage caused by overextension of actuator
- Simple, chain-lifting design has fewer moving parts than other plow-lifting devices for a longer-lasting system
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Strong rubber deflector on top of plow directs snow down and away from your windshield
- Hardened steel edge breaks up packed snow and ice
- Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
- Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
- Can extend life of the plow if you hit an obstruction
- Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
- Wheel height is adjustable to match your vehicle height
- Plow handle with knob lets you easily move plow up and down during mounting
- Safety chain holds plow in raised position during travel
- Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
- ISO certified
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
Specs:
- Application: 2" x 2" hitch receivers
- Cannot be used with hitches or receiver adapters that have built-in drops
- Blade dimensions: 84" wide x 22" tall
- 3 Blade angles:
- Left 45 degrees
- Straight ahead
- Right 45 degrees
- Distance from center of hitch pin hole to the front edge of plow: 50"
- Weight: 283 lbs
- 1-Year limited warranty
The Detail K2 Elite snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled wireless actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Elite snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
The Elite snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Smooth, Controlled Lifting with Electric Actuator
The electric actuator on this plow allows you to lift and lower the blade using either a toggle switch that installs in your cab or the included wireless remote control.
To raise the plow, use the switch or remote to activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. This simple, chain-lifting design has fewer moving parts than other plow-lifting devices, so the setup is less complicated and there are fewer parts to have to repair or replace.
This actuator lifts and lowers the snowplow blade smoother than an electric winch. In addition, fewer amps are required to run an actuator than to operate an electric winch, which means that the solenoid on the Detail K2 Elite will last twice as long as the solenoid on a plow that uses a winch. There is also a built-in clutch that prevents damage to the actuator if you try to raise the blade too high or drop it too low. The electric actuator is built to withstand extreme temperatures and wet conditions with its completely sealed gearbox and housing.
Detail K2 Features
The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.
Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.
Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.
AVAL8422ELT Detail K2 Elite Hitch Mount Snow Plow - 84" Wide x 22" Tall Blade
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31198
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Utilizes existing factory hardware
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Installation instructions included
- Assembled in USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31198 Curt Front-Mount Trailer Hitch Receiver
Customer Reviews
Detail K2 Elite Snowplow for 2" Hitches - 84" Wide x 22" Tall - K2AVAL8422ELT
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31198
Average Customer Rating: 4.8 out of 5 stars (139 Customer Reviews)
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Paul Meudt02/01/2024
2022 Toyota RAV4
Shipping was fast and packaged good with no scratches.
I modified my 2010 Tundra skid pan for oil filter changes before mounting.
Replaced all 4 OEM tow ring bolts using anti-seize with new longer M12-1.25 X 40MM class 10.9 zinc finished hex cap screws along with new M12 X 24MM OD HARD WASHERS and torqued all 4 to 79 ft/lbs. Mounted new Thule EasyFold XT 2 Hitch Bike Rack and it fits in front without using the hitch extension.
All went together as planned and can now take E-Bikes with us while pulling our camper. We are happy campers!
by: Steve 05/07/2024
Primarily bought the front receiver hitch to haul our 2 e-bikes. Did that because it was easier than hauling them inside our camper. And didn’t trust them bouncing around on the back bumper of the camper. Hauled the bikes that way on several camping trips. Easy as pie and I could keep an eye on them the whole trip.
by: Alex183803/09/2014
2014 Toyota Tundra
I bought and installed the front hitch to my 2014 Toyota Tundra because I did not want to use my travel trailer's rear bumper. The 2014 Toyota Tundra has a skid plate that has to be removed for oil changes and this front hitch installed would also have to be removed each time the oil is changed. I decided to cut a square hole in the skid plate allowing access to the oil filter so that the skid plate along with the front hitch would not have to be removed to get to the oil filter.
The skid plate has 5 bolts and 3 screws and drops down for oil changes. To completely remove the skid plate after removing the bolts and screws you have to hold the skid plate and move it to the drivers side to unhook two hooks which are "L" shape facing the same way towards the passengers side. Do not leave the skid plate off because too many hoses and lines will be exposed and can be damaged while driving.
It took me less than 20 minutes to install the front hitch and I also bought a Hitch Extender for a 2" Trailer Hitch 7" which made the hitch come even with the front bumper on my 2014 Toyota Tundra.
I bought several other accessories to go with the front hitch which I can use when needed. I did buy this hitch mainly to use to carry my 2 beach cruiser bikes and it works perfect.
Now all I have to do is insert the bike carrier into the receiver hitch and load the bikes and I am off with no worries about the bikes being in the rear of my travel trailer or trying to keep them steady in the bed of my Tundra.
The bikes look really good in front of my Tundra and my driving view is not blocked at all with the bikes on. With the 7 inch extender the bikes are nowhere near the truck and with the Anti-rattle with lock on the 7" trailer hitch receiver there is no swaying while on the road or on the freeway at any speed. Thanks etrailer.
Mike F.
8/13/2015
Do you use any type of strap from the body of the bike rack back to the hood for stabilizing the bikes while on the road? I do not know where such a strap would be secured but I have seen some tuck them under the hood and close the hood on the end of the strap thereby securing the strap that runs from the rack under the hood lid. Does this question makes sense? Maybe such a support straps would not be required with this setup.My Tundra is a 2012 and I am assuming the skid plate is similar to yours. My bike rack looks to be much the same style as in your pics.Thanks.
Alex 8.
8/17/2015
Mike F.I dont think a strap for this type of bike rack would be needed. Even though I did use a rachet strap and made the connection from the tow hooks to the bike rack to keep it from bouncing at one time. Except for that one time I have never had to use a strap at all. Also use an Anti-Rattle Trailer Hitch Receiver Lock to keep the connection secure and tight. I make sure the bolts to the hitch and the hitch extender adapter are tighten to the fullest and the velcro straps that go around the bike tire rims are tight and secured. The hooks that go down on the bike frame are pushed down and then tighten. I have traveled throughout California with these bikes and never had a problem. Of course I always check the connections. I bought several bolts and washers for the hooks to tighten in case the bolts strips which has happened twice.Alex
Rachael H.
8/18/2015
Thanks for the follow up Alex. Please also keep in mind that using a hitch extender will reduce the capacity of the hitch by 50 percent.
Terry K.
1/29/2016
Alex- can you tell me what other parts extension, lock, etc you purchased from e-trailer for your application. I just received this unit from them. Also, how did you cut the hole for oil filter removal? Would a Dremel tool work for this? Thank you for any assistance you can provide..Thank you, Terry .
Alex1838
2/5/2016
Terry K. I also bought a Hitch Extender for a 2 Trailer Hitch 7 which made the hitch come even with the front bumper on my 2014 Toyota Tundra. I bought several other accessories to go with the front hitch which was the Anti-rattle with lock on the 7 trailer hitch receiver there is no swaying while on the road.For your question onhow did you cut the hole for oil filter removal? Would a Dremel tool work for this?I guess a dremel would work but what I used was a metal snip cutter. I bought one at home depot for about $9.00 and to start the cut I drilled a large hole at the corner of the square to be cut and then I just snipped along the square like a pair of scissors. I then filed the opening and on the square metal piece I also bought drilled several holes as I attached it to the skid plate.
by: David E.06/26/2012
2011 Toyota Tundra
bought this for my 2011 tundra, I launch my boat (5500 lbs) at a private ramp where a front mount hitch is pretty much required due to the tight access. Anyway this mounts to the front frame between the factory tow hooks on the 07-12 tundras. Does not take any time at all to install it. It weighs 29 lbs according to my scale. . It does not hang down any lower than the TRD Package steel skid plate, so I liked that. It looks plenty strong for just about any towing/launching activity I can think of with my truck.
You may need a 6-8 inch hitch extension to mound your receiver. But I would rather have to use an extension then have the hitch. itself stick out any farther forward. You may have to remove it to do an oil change, not sure yet, either way, no big deal.
Pete
10/20/2013
David or anyone!Nice writeup and photo to help us in this purchase. Can you tell me if you had to remove the hitch to complete an oil change sir? It looks like you need to remove the hitch to get the skid plate off, but wasnt sure. Thanks,Pete
David E.
10/23/2013
This front reciever will need to be removed to do an oil change. The 2 toyota dealers that have worked on my tundra did not have a problem removing it. They did not charge me any more for an oil change.
Patrick B.
7/28/2014
Remember that the hardware included with hitches is usually torque-to-yield, TTY. This means that the hardware is only meant to be torqued once. If removed, the hardware should be discarded and replaced. The instructions do specify a 4 inch hole to be cut that allows easy access for oil changes. Its at the top of the pages in an in-set diagram. Its an easier solution than removing each time and it doesnt significantly reduce the protection the shield provides.
by: Gino05/28/2023
2016 Toyota Tundra
Fit perfectly with tow hooks on my 2016 Tundra. Had my mechanic install it and cut the hole in the skid plate. The receiver is shown with the Kuat Hi/Lo hitch extender and a bike rack.
by: Kathy 02/26/2024
Toyota Tundra
We chose the Curt Front Mount Trailer Hitch Receiver so we could safely transport our RAD electric bikes while also pulling our travel trailer.
We had it professionally installed onto the front of our Toyota Tundra and it has worked out very well!
We are very pleased, and glad that we have it!
by: Kevin04/29/2024
2017 Toyota Tundra
The receiver was easy to install on my 2017 Tundra. I used a 4” hole saw to cut a hole to provide access to the oil filter. I carefully measured for the location of the hole as the drawing provided appeared to place the hole on the passenger side of the truck although the actual location is the driver’s side. Also, the instructions called for “return the tow hooks to the customer” for 2017 models, but I installed them just fine. That must have referred to a different Toyota model.
by: Bill W08/28/2016
2010 Toyota Tundra
I got this receiver for the front of my 2010 Toyota Tundra pickup truck so that I could mount a Fishin Mate beach cart on the front of the truck when my travel trailer is hooked up to the rear receiver. The Curt front receiver is all I hoped it would be. I have used it for a year now, having made one trip from my home in Virginia to Cape Cod, and another trip to Florida. For a two months stay in Florida, I used the cart on the front or rear receiver several times a week. The Curt front receiver is of the highest quality. It was simple to install. You take two bolts each out of each of the two front tow hooks mounted on the front of the frame, hold up the receiver to line up with the holes in the frame, hold up the tow hooks back to their position one at a time, and reinsert the original bolts. (Simply put, the receiver is inserted between the tow hooks and frame.). The first time I installed it, it did only take the twenty minutes or so that people say it does. I have chosen to not cut a hole in my skid plate under the engine, so when I change the crankcase oil and filter I have to remove the Curt receiver and skid plate every time. It takes some time, but I'm okay with that. It's that easy. I am 72 years old, and don't have the strength I used to have, so I can't manhandle the receiver and skid plate, but instead balance them on the cradle of a floor jack and finesse them into place. I've got the knack of it, and it goes well. I did not get a riser bar to elevate the cargo from the height of the receiver, so my cart carrier goes straight out the front. It is close to the road, but not so close as to have ever scraped going in and out of gas stations. I remain aware of it and am careful. The Curt receiver has traveled thousands of miles over a year now, has been off and back on twice for oil changes, has remained new looking, and has met all my expectations. E-Trailer, as always, remains the best internet shopping business I have ever dealt with.
by: ArkansasTraveler06/05/2017
2016 Toyota Tundra
Purchased and installed a Curt front hitch in 2016 for my 2011 Tundra. The installation was very easy. I tow a travel trailer and use the front hitch for a bike rack.
by: Matt L05/03/2018
2015 Toyota Tundra
Installation was easy, even for one person (and the help of a lift). The hardest part was removing the skid plate from the Tundra. Couldn't be happier.
Matt L.
5/4/2019
It’s been perfect. Modifying the skid plate so it doesn’t have to be removed for oil changes was the best idea. The hitch makes hauling an extra cooler and fishing rods so much more convenient.
by: Bee01/02/2020
2011 Toyota Tundra
Installing was a breeze. I used a floor jack to hold out up while screw the bolts in. Done in 15mins. Looking at other pictures I see, it looks like it was fairly low to the ground but in reality, it's not as low as the pictures make it look. I have no use for it now but future plan is front tray and maybe a plow. The finish is very nice. I cut a removable filter access in my skid plate instead of leaving a big gapping hole. It's a very nice hitch to have.
by: ‘Los08/04/2021
This is my second purchase of this product. etrailer shipment was fast and delivered ahead of scheduled. Easy fit and installation. I did modify OEM engine plate for future engine oil service.
by: Scott 10/31/2023
2007 Toyota Tundra
Great for moving airplanes with my truck! It's harder to do than a maneuverable tug that's designed for this task, but I CAN do it. I have a Cessna 310 which I can't push myself without help. Anyone with a heavy airplane should get one of these.
Fitment is perfect. Installation is really quick (10 minutes) and easy on my 2007 Toyota Tundra. It helps to have friend hold it in place when running the bolts in.
by: Bruce04/15/2019
Simply the best way to maneuver your trailer into tight places you can see everything. Because it’s on the front end of your truck excellent product excellent quality thank you E trailer.
Bruce
4/16/2020
Works great just like advertised and it’s made in the USA !!!!
by: Robert 04/25/2024
The only thing I had to do was make the tubes
Longer for longer rods
by: Louis11/16/2017
I use this hitch to tow my motorcycle carrier and motorcycle. I've gone over ten thousand miles with the bike on the hitch without a problem. It's a great easy to install product.
by: Gerral07/25/2023
Hitch feels like good quality. When I bolted it up. Holes lined up perfectly. I'll be putting the 500 lb vertical load to the test soon. Will give a update. Thanks for the great service.
by: Ty01/24/2023
The hitch is great and was easy to install. My problem came when I went for an oil change.
The mechanic said he would have to remove the hitch to then remove the skid plate so he could get to the oil filter and plug.
I have not reinstalled it since then. I’ve been researching a work around like cutting a little door or hole into the skid plate to facilitate future oil changes.
Still trying to figure it out.
If you buy this hitch, keep this in mind.
Jenny N.
1/27/2023
I do know that you would want to enlarge the hole in the front skid shield to allow access to be able to change the oil filter. Were you able to take this step when installing the hitch?
Ty
1/27/2023
Not yet. Was going to ask the advice of my mechanic the next time I get the oil changed.
by: Chris 08/13/2022
Toyota Tundra
Had my mechanic install, they had to cut a hole in my Tundra front skid plate so we could have continuous access to the oil filter. Can't remove the skid plate without removing the front hitch. Needed to get an 8 inch hitch extender to attach our Kuat bike rack. Used it several times and everything works well. Thanks, Chris.....
by: Jordan03/28/2018
2008 Toyota Tundra
Untested, thus 4 stars for the product. Fitment was perfect, although 20-45 min install goal is a bit lofty for an older truck that has been off-road and has some rust. New rig-easily achievable time windows.
etrailer gets 5 though. I liked that the shipping cost that is associated with the free shipping was applied to my expedited shipping. Shipped very quickly.
by: Gary 12/20/2023
I simply love it, it does everything I need it to do.
by: Robert09/24/2019
This process was quick and easy. Installing took only 15 minutes on my 2012 Toyota Tundra. The fit was exactly what I wanted.
by: Michael02/23/2018
The item arrived quickly after ordering. It was wrapped nicely and the product was well painted. It fit great and will make your front towing much easier.
by: Mr. AN05/21/2011
Fit to vehicle without problem, Fast and easy installation, Good service, Fast Shipping . We will buy again from this vendor.
by: Robert09/01/2020
Shiny hitch showed up at my door & 30 minutes later, it's installed!
25
139
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Replacement Option For Bent 84" Snowplow
- We may have the replacement parts you are looking for, but I would need to know the brand and model of your current snow plow to confirm the correct parts.
If there are not parts available, or if you would rather not deal with having to change them another option is to replace your current plow with a similar snowplow like the 84" wide x 22" tall Detail K2 Avalanche Elite Snowplow for 2" Hitches # K2AVAL8422ELT which can be angled 45 degrees to left and right or can be used straight
view full answer... - Recommended Snowplow for a 2024 Jeep Wrangler Unlimited
- I recommend using the Detail K2 Elite Snowplow # K2AVAL8422ELT on the front of your 2024 Jeep Wrangler Unlimited. This will attach using a Front Receiver # C31086 so you will be able to easily remove and install the plow when needed. I prefer this plow as it uses an actuator which is better than a winch style since you do not have to worry about snow and ice collecting in the cable/strap.
view full answer... - What Is the Required Receiver Height for the Detail K2 Avalanche Elite Snowplow
- The Detail K2 Avalanche Elite Snowplow part # K2AVAL8422ELT will work with a front mount trailer hitch that is between 9" to 18" from the ground to the bottom inside edge of the receiver tube according to Detail K2. The blade height is adjustable which is why there is such a large range.
If your front mount trailer hitch is not within this range then your only option is to use a drop front mount trailer hitch. If you can let me know the year, make, and model of the vehicle I can see
view full answer... - Will A Leveling Kit Be Required To Use A DK2 Elite Snowplow
- The Detail K2 Elite Snowplow for 2" Hitches # K2AVAL8422ELT doesn't require a leveling kit or list any specific heights that the front-mounted hitch needs to be at so you should be fine without one. That being said you are adding a considerable amount of tongue weight to the hitch so you could run into very little clearance between the ground and snow plow components.
This plow has a shipping weight of 334lbs so you can expect it to be close to 330lbs once all the packaging is removed
view full answer... - Which Front Hitch Receiver for 1997 Ram 2500 to Mount Detail K2 Avalanche Snow Plow
- You can use the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31604 on your 1997 Dodge Ram 2500 with Extended Cab and long bed, which would give you the front mounted hitch receiver you need to carry the Detail K2 Avalanche Elite Snowplow for 2" Hitches - 84" Wide x 22" Tall # K2AVAL8422ELT. Additionally, you would not need any type of drop adapter for this setup.
You could also use the Detail K2 Avalanche Snowplow for 2" Hitches - 84" Wide x 22" Tall # K2AVAL8422, which
view full answer... - Do Factory Tow Hooks Get Reinstalled When Installing the Curt Font Hitch on a 2013 Toyota Tundra UL
- According to the installation instructions, the tow hooks should have been reinstalled when the Curt Front Mount Trailer Hitch Receiver, part # 31198, was installed on your 2013 Toyota Tundra Unlimited. I have attached a picture from the instructions that you can find on the product page for you to see. The mounting hardware is the OEM hardware that was used to hold the tow hooks prior to the hitch being installed.
view full answer... - Will The Curt Front Mount Receiver For a Toyota Land Cruiser also Fit a Lexus LX470?
- The Curt Front Mount Trailer Hitch Receiver # 31198 you saw is a confirmed fit for the 2008-2018 Toyota Land Cruiser, 2008-2021 Toyota Sequoia and 2007-2021 Toyota Tundra. This receiver has never been confirmed to fit on a Lexus LX470. It does appear the front fascia is different so I cannot confirm it will fit on your Lexus. You may need to have a front receiver custom fabricated for your Lexus. I have included an image below with some measurements for the Curt receiver if you want to
view full answer... - Comparing Curt and Draw Tite Front Hitches for 2018 Toyota Tundra
- For your 2018 Toyota Tundra we have the Curt front hitch part # 31198 and the Draw Tite part # 65080 both as a confirmed fit and both really good options. Both install the exact same and have same capacities, but I like the Curt better as it's made in the USA and the Draw Tite is not. I attached a picture that shows the hitch installed for you to check out as well.
view full answer... - Mounting a Winch Plate and Front Mount Trailer Hitch on a 2007 Toyota Tundra 2WD
- I spoke with my contact at Curt and he stated that the Curt Front Mount Trailer Hitch, # 31198, will not sit flush with the bumper on your 2007 Toyota Tundra 2WD, but about 2-3 inches back. We offer the Curt Electric Winch Mount Plate, # C31010, that has three pin holes that will allow you to adjust the distance of the winch plate from the vehicle. The measurement from the furthest pin hole to the mounting plate is 8-1/4 inches. I have attached a picture showing these measurements. This
view full answer... - Is there a Front Receiver Hitch for a 2022 Toyota Tundra?
- Yes, we do have a front mount hitch for a 2022 Toyota Tundra. It is the Draw-Tite Front Mount Trailer Hitch item # 65080. This hitch has a 2" x 2" receiver and a 500 lbs vertical load limit.
view full answer... - Front Mount Hitch with a 2" Receiver on a 2018 Toyota Land Cruiser
- We have a front hitch for your 2018 Toyota Land Cruiser!
It's the Curt Front Mount Trailer Hitch, part # 31198. This 2" receiver hitch has a 500-lb vertical load capacity and a 9000-lb line pull capacity.
I've linked to a video installation of this hitch on a 2019 Sequoia for your reference.
view full answer... - How to Mount Accessories in the Curt Front Mount Hitch # 31198 on a 2011 Toyota Tundra
- If the receiver tube is recessed too far on your 2011 Toyota Tundra for your accessories, a hitch extender, see link, can be used if you stay within 50 percent of the weight capacity of the hitch and the vehicle frame capacity for the front mount hitch. Extenders reduce the capacity of the lowest rated item by 50 percent because of the extra torque that can be applied by the longer shank in the hitch.
If you need to purchase accessories, your best bet is to measure from the center of
view full answer... - Does Front Skid Plate have to be Removed to Install Front Mount Trailer Hitch on 2006 Toyota Tundra
- The Draw-Tite front mount hitch # 65031 requires removing the front skid plate for installation. See instructions and video links I have linked for this hitch.
On front mount hitch # 31180 you should not have to remove the skid plate. The 2001 model we installed it on did not require removing the skid plate and the installation instructions make no reference to removing it. I have linked the instructions and a video showing a typical installation of this hitch as well.
view full answer... - Skid Plate Removal and Ground Clearance w/Front Mount Trailer Hitch Installed on 2007 Toyota Tundra
- You do not have to remove the skid plate on your 2007 Toyota Tundra to install Curt front mount receiver # 31198 but you can if you wanted to. You should be able to loosen the skid plate enough to move the skid plate out of the way enough without having to remove the entire hitch.
I have linked the installation instructions for you to view. The receiver will be just below the lowest trim piece on the front bottom of the vehicle to give you an idea of ground clearance. I included a picture
view full answer... - Skid Plate Removal Required To Install Front Mounted Hitch on 2013 Toyota Tundra
- According to Curt, if the truck is equipped with the skid plate, the skid plate will need to be removed or have the 4 inch diameter hole cut into it to allow for oil changes. The hitch cannot be removed each time the oil needs changing, because the hitch hardware is designed for one-time usage only. Once the bolts are install and torqued one time, any subsequent removal/installation would stretch and weaken the bolts, leading to an unknown weight rating.
So, you can remove the skid plate
view full answer... - Bike Rack Options for a 2007 Toyota Tundra Towing an A-Frame Travel Trailer
- I have a couple of ideas that might work for you. First, take a look at the CURT Multipurpose Ball Mount, # D210. What this is going to do is allow you to put a bike rack in the top receiver and tow a trailer with the ball mount part. The receiver part measures 4-3/4 inches from the top of the shank to the bottom of the receiver. This may be enough to hold the bikes above the items on the trailer frame, especially if that bike rack also has a rise in the shank.
The multipurpose ball
view full answer... - Will The Curt Front Hitch Work With Motorcycle On 2012 Toyota Tundra
- The Curt Front Mount Trailer Hitch Receiver part # 31198 which is a bolt-on fit for a 2012 Toyota Tundra will work well for a motorcycle and carrier. The trailer hitch has a 500 lb vertical load rating so as long as the weight of the motorcycle and carrier does not exceed this you will be good to go. The etrailer Motorcycle Carrier w/ Ramp for 2" Hitch part # e98873 which only weighs 58 lbs is what I recommend you use if you don't already have an option in mind.
In regards to legality,
view full answer... - Recommended Tools For Cutting Hole In Skid Plate On a 2009 Toyota Tundra For Curt Front Receiver
- There are a few different tools you can use to cut the 4" hole in the skid plate on your 2009 Toyota Tundra. This hole is required so you will be able to access the oil filter after installation of the Curt Front Mount Trailer Hitch Receiver # 31198 on your Tundra. You can use a 4" Hole Saw from our kit # PT34VR, body panel trim saw or a small jig saw to cut out the hole. I recommend removing the panel to prevent any damage to your vehicle when cutting out the hole.
view full answer... - Distance From Hitch Tube To Receiver of Draw-Tite Front Mount Hitch For 2020 Toyota Tundra
- I was able to get the measurements you were looking for of the Draw-Tite front mount hitch that fits your 2020 Toyota Tundra, which is the following:
- Draw-Tite Front Mount Trailer Hitch Receiver # 65080
The hitch is similar to the Curt # 31198 in that it measures 3-5/8 inches from the hitch pin hole to the front of the crosstube, and 6 inches from the crosstube to the front of the hitch. We haven't had a chance to install either hitch on a Tundra, but I did add some photos for you
view full answer... - Does the Factory Skid Shield Need to be Removed to Install Curt Front Hitch on a 2012 Toyota Tundra
- I spoke to my contact at Curt and he informed me that you will not need to remove your skid shield to install the Curt front mount hitch # 31198. The only thing that would get removed is the tow hooks, but those will get reinstalled with the hitch so you would not lose those either.
Check out the installation instructions I attached also.
view full answer... - Front Mount Trailer Hitch for a 2018 Toyota Tundra with Technology Package
- According to Curt, the Curt Front Mount Trailer Hitch Receiver part # 31198 is a confirmed fit for all models of the 2018 Toyota Tundra even ones with the technology package like yours. The hitch is very easy to install and will give you a 2" receiver tube opening. It will however require a slight modification to the factory skid shield as you can see in the attached photo.
If you can tell me what you will be using the hitch for I would be glad to provide some additional recommendations
view full answer... - Comparison of Curt and Draw-Tite Front Mount Trailer Hitch Receviers for 2008 Toyota Tundra
- We have two front mount hitches that are confirmed to fit your 2008 Toyota Tundra. The Curt 31198 and the Draw-Tite # 65080.
They do have identical specs since they both have a 9,000 pound line pull and 500 pound vertical load. Both have a 2 inch recevier opening. Both bolt to your Tundra's frame and do not require any drilling. The largest difference is going to be the appearance once either is installed. The receiver tube of the Draw-Tite protrudes further forward than the Curt
view full answer... - Front-Mounted Hitch Receiver for 2017 Toyota Tundra 4X4
- We can offer you a choice of two 2-inch front-mounted hitches for your 2017 Toyota Tundra. You can see both the Curt and Draw-Tite options by clicking on the link provided.
Both Curt hitch # 31198 and Draw-Tite hitch # 65080 share 500-lb vertical load and 9000-lb line pull ratings. Both are no-drill installations using included hardware. The Curt has the advantage on price so I suggest this one over the Draw-Tite. Installation instructions are linked for you.
If you plan to use a
view full answer...
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Written by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Test Fit:
Randy B
Test Fit:
Shane H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Matthew E
Updated by:
Isabelle B
Video by:
Zach D
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
2/2/2024
Thats so great to hear! Give us some updates on your next trip!