Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Jeep
Part Numbers: 90195,3073-P
Retail:$323.68
Our Price: $198.55
You Save: $125.13
This item qualifies for Free Shipping
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
part number: 90195
The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing.
Features:
- Brake controller activates trailer brakes in proportion to your vehicle's braking action
- Automatically adjusts trailer's braking based on deceleration of tow vehicle
- Large, accessible buttons make it easy to operate the controller
- Switch between 3 different levels of boost, adjust braking output, and navigate the menu
- Handy rotary-style lever on the underside of the module keeps the manual override within easy reach
- Easy to swap out different trailers - great for a fleet
- Save up to 5 trailer profiles to make it quick and easy to swap trailers or drivers
- Store boost level, brake output, brake type, and display and language preferences
- Customizable, easy-to-read LCD display gives you braking status at a glance
- Color and contrast can be personalized to give you the right setting to make it easy for you to read
- Built-in safeguards protect your vehicle, trailer, and the controller
- Runs continuous diagnostic checks to alert you to problems as they come up
- Minimizes drain on car battery by drawing only 3.6 milliamps when not in use
- Prevents trailer brakes from overheating by reducing power output during prolonged stops
- Defends brake controller and trailer breakaway systems against shorts
- Automatic leveling lets you mount at any angle up and down for an easy installation
- Controller must be parallel with direction of travel and horizontally level
- Included harness hardwires to vehicle and plugs into controller
- Plug-in, vehicle-specific adapter available for select vehicles to reduce installation time
- Quick-disconnect feature lets you easily remove and store the controller when you don't need it
- Replacement wiring harness (sold separately) and replacement bracket (TK5906 - sold separately) required to swap controller between vehicles
Specs:
- Application: trailers with up to 4 axles (8 brake assemblies)
- Compatible with electric or electric-over-hydraulic trailer brakes
- Overall dimensions: 5" long x 3-1/2" wide x 1-3/8" tall
- LCD display dimensions: 1-3/16" wide x 9/16" tall
- Mounting range: 360 degrees vertically
- Limited lifetime warranty
Braking Output
Braking output is the maximum amount of power that will be applied to your trailer's brakes. How much braking output you need is determined by the weight of your trailer; a heavier trailer will need more power to bring it to a stop. Use the arrow buttons on the front of the module to set the output. You want to set the braking output as high as you can without locking up the brakes. Once you've set up the brake controller the first time, you shouldn't need to adjust this setting unless the trailer load changes, you switch trailers, or road conditions change. The LCD display will show the current output setting being used.
Power Boost for Heavy-Duty Towing
The boost setting controls the aggressiveness of your trailer's braking, meaning how quickly the brakes reach the maximum braking level. You can adjust this when you're towing heavy loads and you need more umph to bring your trailer to a stop. Your tow vehicle doesn't need that much power to brake in time, but your heavy trailer does.
Depending on the level of boost, your trailer brakes can start at either 13 percent or 25 percent of the set braking output. What this means is that, instead of starting at 0, the brakes will start at 25 percent and get to100 percent sooner. This keeps the trailer from pushing your tow vehicle forward.
If your trailer weighs less than your tow vehicle, no boost is needed. But, if you want your trailer to lead the braking, you can select level B1.
Boost Levels:
| Approximate Gross Trailer Weight | Boost Level | Increase in Initial Power Output |
|---|---|---|
| Less than tow vehicle GVW | B1 | 13% |
| Equal to tow vehicle GVW | B1 or B2 | 13% or 25% |
| Up to 25% more than tow vehicle GVW | B2 or B3* | 25% |
| Up to 40% more than tow vehicle GVW | B3* | 25% |
*Both B2 and B3 offer a 25-percent boost in initial power. But the braking curve for B3 is more aggressive than that of B2. This means that, even though you will start out with the same intensity when using these boost levels, you will get an overall more aggressive braking experience with the higher level. So if you use B3, you will reach maximum braking sooner than if you use B2.
Storable Settings
Customize the P3 and store your settings so that you can easily access them later. If you tow multiple trailers, or the same one but with differing loads, store the desired boost and power levels for each so that you don't have to completely reset the controller every time you switch between trailers. It's easy to swap between drivers as well. Program the P3 display with your desired screen color, brightness, and language, and you can easily return it to your preferred settings the next time you tow.
Customizable LCD Display and Advanced Diagnostics
The P3's LCD display features a distinctive look with multiple color and contrast options. With lots of customized options, you can change the display to make it easy for you to see and check your braking status at a glance.
It also includes comprehensible and detailed roadside diagnostics. The P3 advanced diagnostics not only notify you of potential problems, but they can also tell you where to begin troubleshooting.
Diagnostic troubleshooting displays include:
- Battery voltage
- Voltage supplied by stop light switch when brake pedal is depressed
- Output voltage to trailer brakes
- Output current to trailer brakes
Diagnostic warning signs include:
- Open ground
- Overload
- Output short
- Power loss
- No trailer connection
Safety Features
The Prodigy P3 offers advanced safety features to prevent damage to various components of your towing setup. Integrated reverse battery protection shields the brake controller and your trailer's breakaway system from shorts. When the P3 is not in use, it will be in power-saving mode. In this setting, it draws only 3.6 milliamps, minimizing drain on your vehicle's battery.
The P3 also comes equipped with a hold feature to prevent wear on your brakes. When you're waiting at a red light, you don't need your trailer brakes on at full power. The longer you sit there, the more they will overheat. But with the P3, any time your tow vehicle and trailer are at a standstill with the brakes applied for more than 5 seconds, the hold feature will kick on and reduce power to just 25 percent. This will keep your trailer in place while saving your brakes.
The P3 keeps the manual override within easy reach, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just twist the rotary-style lever from right to left. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
Automatic Leveling and Simple Installation
The self-leveling feature of the P3 ensures that the brake controller continues to function even as you drive up steep hills or through the mountains. Simply mount it in your cab at any vertical angle, and the controller will level itself automatically thanks to its 360-degree rotational range. This makes the installation that much easier. But keep in mind that the P3 must be horizontally level and parallel with the direction of travel to work correctly.
Installation is a snap. After mounting the P3 unit in your cab using the included bracket, hardwire one end of the included pigtail harness directly into your vehicle. The other end plugs into the brake controller. To remove the P3 for storage when you're not using it, just unplug the unit and slide it out of the bracket. With a replacement wiring harness (sold separately) and replacement bracket (TK5906 - sold separately), you can even transfer the Prodigy P3 to another vehicle.
Installation Accessories
For even easier installation, a vehicle-specific specific wiring adapter is available for most newer trucks and SUVs. One end of the custom adapter plugs into your vehicle, and the other end plugs into the controller - no hardwiring required.
See also etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required:
20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications
30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications
Proportional Braking
The Tekonsha Prodigy P3 brake controller comes equipped with proportional braking to give you the best towing experience. Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer.
The Prodigy P3 uses an internal inertia sensor to detect how your vehicle is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow vehicle and activates the trailer's brakes to slow at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.
90195 Tekonsha Prodigy P-3 Proportional Trailer Brake Control
39526 Hidden Hitch Proportional Brake Control
20195 Draw-Tite Intella-Stop Xtreme Proportional Brake Control
California residents: click here
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Jeep
part number: 3073-P
Install your electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port in your vehicle.
Features:
- Plug-in wiring adapter allows for quick, simple installation of your electric trailer brake controller
- No cutting or splicing required
- Custom connector end plugs into the built-in port in your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible with time-delayed and proportional brake controllers from TrailerMate, Draw-Tite, and Tekonsha
- Brake controller must have built-in plug for adapter to connect - will not work on controllers with pigtail wiring harnesses
- 1-Year limited warranty
Note: To illuminate your vehicle and trailer brake lights when you activate the manual override on your brake controller, use this adapter in conjunction with the Tekonsha brake controller converter with 7-way adapter (30235-P - sold separately). Required for use in the state of California.
Installation of Tekonsha Brake Controller Adapter
This adapter plugs into the 5-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.
This adapter requires no cutting or splicing of wires to install. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there is no hardwiring, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.
307300 Tekonsha Brake Control Wiring Adapter with 2 Plugs
Replaces Tekonsha 3073-P
Item # 3073-P
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional - 90195
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Jeep - 3073-P
Average Customer Rating: 4.9 out of 5 stars (6071 Customer Reviews)
The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing. Install your electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port in your vehicle.by: Monte C.05/20/2023
This was a very easy installation of the hitch, wiring harness and trailer brake. Less than 2 hours with some help from my wife. All of the electrical was plug-n-play. I'm sure doing it myself (with help from [online]) saved me a lot of money.
by: Mark05/17/2024
I have never used any other brand of brake controller so it's hard to compare brands. And since the Tekonsha controllers have always worked extremely well I've never had a reason to use a different brand. I use this on an F350 Powerstroke Diesel hauling an 18 foot enclosed trailer and a 12 foot dump trailer. I had one of these controllers destroyed (electronically) when my brother connected it via 7 pin to one of his trailers that was wired differently than my trailers. I replaced it about 10 years ago and haven't had a problem since. I also had my brother rewire his trailers to match mine in case he needed to borrow my truck again, which he has, with np problems. This last controller I purchased was for my tractor so I could move my trailers around safely with my 28hp tractor.
by: Jason 05/17/2023
I love this! We camp monthly, and we tow our 23ft camper with a 1500 GMC. The break assist has been a fantastic tool to help keep us safe and in control of the camper.
by: Ronald04/25/2021
This Tekonsha Prodigy P3 was recommended to be by a friend who works at an RV dealership service center. This is my fifth trailer brake controller over a forty-year period, and my first progressive controller. I really love this controller. My truck has a factory towing package, but was manufactured prior to inclusion of integrated controllers. Since the truck has factory towing, the installation was very simple. The installation instructions were clear and complete. I would definitely recommend this controller to anyone looking for a dependable, easy to install and easy to use controller.
by: Matthew03/24/2023
Installed myself in about 30 minutes. 06 Silverado crew cab. Fit right up to factory fitting that was hidden up on top of the spare tire.
by: Wayne04/25/2021
I mounted my Tekonsha P3 on the dash just to the left of the steering wheel. Has very easy access to quickly activate the lever on the bottom of the unit to apply maximum trailer brakes. But I needed a wiring harness almost double the length of the Tekonsha Wiring Adapter so I just purchased two and spliced them together to make one long one......yea I could have saved money and just sliced in longer wires....Am very happy with the Tekonsha P3, With this mount it makes it easy to disconnect and put into my Ford F150 or my Tacoma.
by: Mark 04/17/2024
The Tekonsha P3 and the wiring adapter have worked great for us. Installed in a Subaru Ascent on the bottom left side of the dash. Worried about hitting it with my foot, but that hasn't even been close to an issue. We leave it installed full time and I never think about it. Actually, as a break controller, that's a great thing. We adjusted the settings a couple times during our first outing with a trailer and have never touched it since. It truly does the proportional breaking well. I definitely prefer the physical box and not having to futz with an app.
by: Dale08/08/2023
Tekonsha P3 brake controller was easy to install. Stacey got me the right wire adapter f ou r my 2022 Frontier. Basically Plug and Play install.
by: Matthew04/12/2024
I installed this in my 1987 K5 Blazer hauling a trailer with an old mustang on it from Washington state to south california… never had an issue. I watched a few YouTube videos and followed the instructions, took me a little more than half a day but this was because i had to replace a fair amount of old wire and then loom it all correctly to look professional but to also have a lasting result. I was concerned I did something wrong as the device stays on with the back light a few minutes after turning off the vehicle… it’s normal, just how the device works. The controller is way to use otherwise. It does brake controller things.
by: Edward01/31/2023
Ordered 9 Jan 2023 and received today 31 Jan 2023. Seemed to sit in US mail system for quite awhile. Once received in Quebec Canada and cleared Canada Customs I received it in 3 days. I am replacing my brake controller with a new one and wanted to upgrade to a better one. Tekonsha P3 comes highly recommended and install is pretty straight forward. I haven't put this to the test as yet but I do not anticipate any problems. Only issue is in shipping.
by: Lauren02/09/2024
10/10 does the job very well and was easy to install myself (be careful about airbags). Saved me a large custom job bill. Worth the price and functions perfectly.
I purchased with the connecting cord/plug for my vehicle and it was seriously the easiest thing to install. Two plugs ins, screwed into my lower dash and done.
by: Dennis08/14/2021
The Prodigy P3 came on just as the instructions said it would. Although I have not used it yet it looks good in my ‘15 LX. I look forward to great service towing my 20’ flat trailer with tractor, rotary cutter and box blade. My to the staff at etrailer.
by: Rob Pettis05/02/2011
First, a huge "Thank You" to Janice!!! You are the best, and the main reason I am the proud owner of Tekonsha P3 Brake Controller! (see, I initially had an issue with my standard online payment service and almost canceled my order because of it) So I went old school and picked up the phone, one with a cord and spoke to a human being. Her name is Janice, and she made me feel confident that I could trust her and etrailer. And as a result, 4 days after placing my order with her I received my package. That's incredible. I am very happy and will most certainly do business with etrailer again in the future because of Janice.
I don't have any experience with brake controllers. So I can't really comment on how much better or worse this one is to any others. But since I am new to the B/C scene maybe this can be considered an unbiased, non professional review of the Tekonsha P3.
My general skill level is "requires supervision around all power tools". But I do have some mechanical ability (snicker). So I will just say, if I could install this thing anyone should be able to do it. Of course I also bought the OEM wiring harness for my vehicle so even I was able to figure out which plug went where. On A scale of 1 to 10 I give it a 3 (I'm somewhat large and getting under the dash wasn't easy or it would be a 1). And as others have said, deciding where to mount it actually took longer.
I attached mine to the top of the lower dash cowl and it fits almost tight to the dash but still within the 180 degree limit. This positions the controller at the same height as my knee and puts it within fingertip reach while resting my hand on my knee. I can see the controller perfectly through the steering wheel spokes. I went with the green screen background. it seemed to provide the best view in all lighting conditions.
The controller itself works perfectly and the set-up was a breeze. Once installed all the functions worked as described. The real time vehicle diagnostics are a plus. I like being able to monitor my battery voltage to the decimal place if I want to. I'm sort of a techno geek so this is really cool. I set the B/C voltage per the instructions and will only use the boost feature if I am in a hurry or feel the trailer is at max load, but my truck is 8k lbs so you may want to set yours to suit your own conditions.
I highly recommend the Tekonsha P3 brake Controller if you want the latest and probably the best controller out there in this price range. I highly recommend the OEM wiring harness if your skills are not pit crew comprable and want the easiest install possible. And, I highly recommend you buy it from etrailer if you want to get it at the best price available (I checked them all) and want the added security you're buying from one of the best online retailers that sells this product. And do yourself a favor, go old school for a change, use the phone and call them, and ask for Janice, although I'm willing to bet everyone there is as nice as her.
Rob
I don't have any experience with brake controllers. So I can't really comment on how much better or worse this one is to any others. But since I am new to the B/C scene maybe this can be considered an unbiased, non professional review of the Tekonsha P3.
My general skill level is "requires supervision around all power tools". But I do have some mechanical ability (snicker). So I will just say, if I could install this thing anyone should be able to do it. Of course I also bought the OEM wiring harness for my vehicle so even I was able to figure out which plug went where. On A scale of 1 to 10 I give it a 3 (I'm somewhat large and getting under the dash wasn't easy or it would be a 1). And as others have said, deciding where to mount it actually took longer.
I attached mine to the top of the lower dash cowl and it fits almost tight to the dash but still within the 180 degree limit. This positions the controller at the same height as my knee and puts it within fingertip reach while resting my hand on my knee. I can see the controller perfectly through the steering wheel spokes. I went with the green screen background. it seemed to provide the best view in all lighting conditions.
The controller itself works perfectly and the set-up was a breeze. Once installed all the functions worked as described. The real time vehicle diagnostics are a plus. I like being able to monitor my battery voltage to the decimal place if I want to. I'm sort of a techno geek so this is really cool. I set the B/C voltage per the instructions and will only use the boost feature if I am in a hurry or feel the trailer is at max load, but my truck is 8k lbs so you may want to set yours to suit your own conditions.
I highly recommend the Tekonsha P3 brake Controller if you want the latest and probably the best controller out there in this price range. I highly recommend the OEM wiring harness if your skills are not pit crew comprable and want the easiest install possible. And, I highly recommend you buy it from etrailer if you want to get it at the best price available (I checked them all) and want the added security you're buying from one of the best online retailers that sells this product. And do yourself a favor, go old school for a change, use the phone and call them, and ask for Janice, although I'm willing to bet everyone there is as nice as her.
Rob
" />
by: John G. Smith05/04/2012
Installed this on my GMC 3500 Duramax with factory integrated brake controller. Not happy with the integrated brake controller on my truck, had problems from the start on 3 different occasions with "Service Trailer Brake" warning on DIC, which of course means NO TRAILER BRAKES. Decided the P3 was the perfect solution. Many more features than the IBC, plus the P3 will also work with electric over hydraulic disc brakes should we ever need that in the future. Fairly easy install on this particular truck, the most difficult thing was running the brake wire from the controller to the 7-pin plug. (This is only required when installing in a vehicle with a factory installed brake control) Well worth the extra effort.
by: Doug B.10/03/2011
I had to build a custom bracket for the controller mount since the X is limited in under dash metal but the install went well. The 7 pin trailer harness is a factory Nissan part (plug and play) , but since the receiver does not have the any mounting brackets, I positioned the 7 pin connector up and out of the way of harm by drilling and flush mounting it in the rear bumper. Thanks for carrying products relevant to your customer's needs and having products that work right. I have attached some pics from the finished install. I will be ordering accessories as I need them from your company as you have always been prompt, thorough and very courteous in all of your correspondence.
by: RoamingRob09/21/2023
I purchased and installed the P3 controller in a 2018 Toyota Highlander XLE after reading many great reviews about it. Wanted a hard wired controller vs. wireless because a brake controller is too important to run over an unreliable wireless connection. Having an IT background I know how unpredictable wireless connections can be. Installation was fairly easy, the hardest part was running a few wires through the firewall of the vehicle.
A few notes, the installation of the actual controller under the steering wheel area was a little difficult because of the design of the mounting bracket. This could be designed better for easier installation. Also, I got a pre-collision warning on my instrument cluster whenever the brake controller was activated. To fix this I had to solder a 1 amp diode on the red cable, which I protected with heat shrink. I reached out to tech support about this error and they were very helpful talking me through a solution.
I like the adjustment capabilities of the controller. I have been able to adjust it so the brakes don't grab when stopping slowly. I really like the manual slide for activating the brakes. This has been very useful for applying brakes on the trailer in a few critical braking moments. The manual lever is also very useful for checking the brakes after connecting the trailer to make sure they are working correctly. I also like that the display shows the level of braking that's applied to the trailer. The color of the back-lit display can also be adjusted to match the vehicle's displays. I definitely recommend this brake controller.
by: Chris M08/20/2013
Installed P3 this weekend in 2013 Tundra Crewmax with towing package and pre-wire. Extremely easy, even with the center console installation. Will let the photos tell the story. Did have to combine the P3 included harness with the additional OEM harness to gain the length I needed. Plug and play with the pre-wire. Hooked up to trailer and set boost levels for varying loads. Works great! Vast improvement over older model Tekonsha controller in my Ram 2500 Diesel. Pull a Kiefer BP horse trailer: about 3600 lbs empty, 7500 with 3 quarter horses and gear. Usually pull 6-8 times per year, with only 1-2 horses. Short distance and flat terrain. It took about an hour to install. Dad is a retired USAF/FAA radar technician with every tool known to man. He QC'd the job. Will try to write better review later.
by: teresa12/23/2020
I have a 2018 BMW X2 that did not come with a factory tow package. I had an etrailer hitch and 4 way plug installed last year and has been perfect since. I just recently purchased a camper and needed to have a Brake controller & Brake controller 7 way deluxe kit installed. My mechanic installed them with the detailed instructions that the units came with without any issues. The Tekonsha P3 is extremely user friendly and is working flawlessly. A bit overkill for my car being I can only tow max 3500 pounds, and my camper is 1 axel. this unit is rated up to 3 axles. I look at it like this way, when I trade in my BMW I will take my P3 with me. etrailer is amazing with the support & products they provide and I highly recommend them to anyone who asks me.
by: Mark Norman08/30/2016
George J,
Wanted to write good points about your customer service and the Tekonska braking system. Included are multiple pictures of the unit installed on my VW SUV.
First off, I am not an expert in any way in installing and wiring. I had the good fortune of having Steve Kunzel, master mechanic at Westside VW in Minneapolis install the unit.(see Fig 1) The first unit sent did not function and was quickly replaced by etrailer.com at no charge. Second unit is pictured (fig 2) and works well. The trailer is used for caring dogs and gear to various dog events and hunting. The trailer weight is about 4500 pounds and the electronic braking system is necessary for good control of the SUV and trailer when braking. Thanks for all your help getting me up and running.
by: BradG10/09/2016
Hi, I got my Item: 90195 and shipping was fast. I was able to get the break controller installed in my 2012 Cadillac Escalade Luxury using the etrailer.com video guide for a 2009 Cadillac Escalade. The install and wiring was the exact same as the video however my wires under the dash or wire bundle did not have a wiring sticker. The color of the wires were the same as in the video. This etrailer video is great and I used it to get my controller installed in about 1.5 hours. My install was trouble free.
This weekend I was able to test out the my new P3 90195 controller and get it calibrated with my 29 foot travel trailer this weekend. Used a B2 setting with 8.0 power. The user guide and instructions you get with the controller help you know what settings to use and how to set the power level.
This is my second controller as I got a P2 Tekonsha from etrailer about 4-5 years back and installed it in a 2007 trail blazer. This older 2P break controller is still working great. I have been rather happy with the quality of the Tekonsha controllers I have. I have not had to call etrailer for support or install questions but did receive a few emails from them to check in with me to ensure I got my shipment and offer me help. They do a good job supporting and responding to their customers and provide an A+ customer experience.
by: Lucas S01/15/2012
I was in the market for a controller for my 2011 Jeep Grand Cherokee and this was a great controller and the price from etrailer was very competitive with other sites. What ended-up being the deciding factor for me on where to purchase the controller was the ease-of-use of the etrailer site. They made it simple to find and compare controllers and getting the correct wiring harness for my application was easy.
In addition to the site they have outstanding customer service. The controller was shipped the day after I ordered it (on a Saturday no less) with free upgraded shipping. They even followed-up with me once the controller arrived at my house. I wish all sites had this level of customer service!
by: Henr L01/03/2017
Purchased brake controller for my 2014 Tuna. excellent order/shipping/receiving time.Received everything I needed with order in a very timely fashion. Website made it very easy to find and decide on exactly what I wanted. Etrailer will be my first choice for finding the accessories I need in the future. Purchased Tekonsha P3 brake controller and is the best thing to a factory installed controller I have encountered.
by: Bob G07/15/2022
I’ve used a Prodigy P2 for 8 years and have been pleased with its performance. I now have a new tow vehicle and will use the P3. The detailed product information on your website and the availability of wiring harness adapters is a convenient bonus.
by: Juan08/20/2018
First and foremost purchasing anything from ETRAILER is easy and fast. There is always someone following up on your purchase and if there is an issue it is quickly resolved. I purchased the Prodigy 3 brake controller along with the wiring kit for my 2017 Nissan Titan SV and installed it myself with the help of the tutorials on ETRAILERS website and it was very easy to do. I will continue to shop at ETRAILER.
by: John08/11/2018
2017 Toyota Tacoma sport with tow package installed P3 controller and wiring with the help of ESP truck accessories installation kit for P3 mount plate that replaces coin holder with no drilling of any kind pretty happy where it's located and no drilling involved it was a pretty fast install with easy to follow instructions
I would recommend anybody with a Toyota Tacoma 2016 to 2018 with this set up
The Toyota dealership didn't even know this existed with a P3 until after I showed him the photo
25
6070
Show More Reviews Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?
- What Would Cause 7-Way Trailer Connectors on Truck and Trailer to Melt When Connected
- Sounds like you had a massive short to ground on the 12 volt accessory circuit of the trailer wiring. This circuit is in the 1:00 position of the female connector on the truck. The ground circuit is in the position opposite of this in the 7:00 position. My guess is there was exposed wire on the trailer side between these two circuits and they touched which caused the problem.
For a new 7-way kit for the trailer you'd want the part # HS381-9000 and then for a new 7-way for the truck you'd
view full answer... - Brake Controller Recommendation for a 2013 Toyota Tacoma and 4,200 Pound Travel Trailer
- If you have never used a brake controller before, the P3, # 90195, would be a good choice because of its many features, but more importantly because of its easy to read and understand diagnostics. It will tell you if there is a problem and what the problem is so you don't have to hunt down codes.
This is also a proportional controller that will apply the trailer brakes in proportion to how much your Tacoma is braking. This is the safest way to stop and it reduces wear and tear on the
view full answer... - What Parts Come with the Tekonsha Prodigy P3 Trailer Brake Controller
- The Tekonsha Prodigy P3 brake controller and the plug-in wiring adapter # 90195-3026-P do come together. They can also be ordered separately. The brake controller can easily be installed on your 2012 GMC Acadia with the included vehicle specific wiring adapter. It is plug and play. No other parts are necessary.
As to your second question, the Prodigy P3 # 90195 comes with a wiring harness that plugs into the brake controller and the pigtails to wire up to your vehicle. However, the 2008
view full answer... - Troubleshooting Brake Controller and Poor Braking on Trailer Towed by 2018 Toyota Tundra
- The three main things that could be causing your issue are:
1) Insufficient brake adjustment. The adjusters should be turned 'out' until you can't turn the wheel by hand when it's jacked up off the ground. Then the adjusters should be backed off by 10 or so clicks so there's still a slight drag from the brake shoes.
2) The brake shoes should be broken in correctly or 'burnished'. This is done by applying the brakes 20 to 30 times to decrease the speed by 20 mph. Example, once reaching
view full answer... - Installing Prodigy P3 Brake Controller on 2007 Holiday Rambler Endeavor RV
- I can help you determine what the wiring functions are on your Holiday Rambler Endeavor but we don't have a way to identify them just based on the colors you listed. Using a circuit tester like part # PTW2993 probe the wires for voltage. The wire with voltage all the time is for the black wire of the controller, the wire that has voltage only when you apply the RV brakes is for the red wire. Now ground the tester to the constant 12-volt power wire, then probe the remaining two wires. The
view full answer... - Where to Find Install Connector on 2007 Ford F-150 for Brake Controller
- To install the Prodigy P3 part # 90195 you referenced the correct install harness is the part # 3035-P. To see where to find the correct connector watch the very beginning of the video link I attached as it shows where to find it on the same generation F-150 you have. This will be the easiest way to find it since pictures are somewhat difficult to see as you don't always get the right context.
view full answer... - Brake Controller Install for 2008 Monaco Dynasty Platinum
- There isn't a vehicle specific brake controller wiring harness for your 2008 Monaco Dynasty but installing a brake controller like the P3 # 90195 you referenced will still be pretty easy since we have heard from previous customers it is pre-wired for a brake controller.
All you will have to do is hardwire the brake controller wiring to the wiring of that 5-wire plug you mentioned by function. The brake controller wires are white for ground, black for 12 volt power in, blue for power
view full answer... - Brake Controller Recommendation For A 2002 Workhorse P Series
- When it comes to installing a brake controller on your 2002 Workhorse P Series you first need to make sure you have a 7 round electrical harness on the back of your Workhorse. The Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7 includes all the wiring and accessories required for the installation of the trailer brake controller.
After the wiring is installed then The Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles
view full answer... - Recommended Trailer Brake Controller For 2007 GMC Sierra Classic 2500 HD Towing Three Horse Trailer
- I highly recommend the Tekonsha Prodigy P3 # 90195 with the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3015-P for your 2007 GMC Sierra Classic 2500 HD Diesel.
The Tekonsha P3 # 90195 is a top of the line trailer brake controller that is extremely reliable and will be more than capable to control the braking for your three horse Trails West Classic Warmblood Trailer . This controller will work with trailers up to 4 axles, offers an easy to read LCD screen, and a
view full answer... - Recommended Towing Package For A 2004 Ford F-150 Heritage Series
- When it comes to installing a towing package on your 2004 Ford F-150 Heritage Series there is a few things you will need. First the trailer hitch.
If you have a standard bed model Ford or the step side model Ford The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # 75740 is confirmed for your vehicle.
This trailer hitch has an easy, bolt-on installation with no welding required. It has a black powder coat finish that covers an e-coat base for superior
view full answer... - Troubleshooting Overload Warning on Prodigy P3 Brake Controller on 2002 GMC Yukon XL 2500
- According the the manual, the overload warning appears when the P3 # 90195 detects an excessive current overload condition during operation. The first thing I would do is check the 7-way connection on your 2002 GMC Yukon XL and trailer for any corrosion and clean it out. You may also want to apply dielectric grease like # 11755 for added protection once this is done.
If you are still getting the warning you should check all of your ground connections for the trailer brakes. Make sure
view full answer... - Installing a Tekonsha Brake Controller on a 2018 Ram 3500 With Factory Ports
- The Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ram # 3024-P will snap directly onto a plug under the dash of your 2018 Ram 3500. Once it is snapped onto that plug, it will then need to be snapped into the port on the back of the Tekonsha P3 # 90195. You will then be completely connected and good to go.
I included an install video of the # 3024-P and # 90195 being installed on a 2015 Ram 3500 for you to check out as well.
view full answer... - Brake Controller Installation Wiring On 2016 Chevrolet Express Van
- Some models of the 2016 Chevrolet Express Van have the brake controller connection wiring taped and tucked under the driver side floor mat up towards the firewall, which sounds like what you have especially since they are labeled as such. The brake controller bundle is pre-wired to the vehicle's battery, stop light switch and the wires should be extended to the back of van to wire in a 7-way. This bundle's wires connect to the pig tail from the brake controller part # 90195 by function.
I
view full answer... - How to Determine if Older Camper is Equipped with Electric Brakes
- I really can't be sure if your 1980 Serro Scotty Camper M-18 is equipped with electric brakes. The only way to know this for certain will be to simply look at the hubs to see if drums and brake assemblies are installed. If it is wired up for brakes, you should also see a couple wires coming out from each brake assembly on each side of the axle.
It sounds like you are just trying to figure out how to wire the 4-Way to 7-Way adapter like the Tow Ready # 30717 on your tow vehicle. This
view full answer... - Best Brake Controller for a 2010 Ram 2500
- The absolute best brake controller we have for a 2010 Ram 2500 is the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195. This controller has integrated safeguards to protect both the vehicle/trailer, continuous diagnostics checks for safety, and storable boost setting which makes it very convenient if you tow different trailers.
The brake controller would not cause any codes to display assuming you do not already have a factory brake controller in place which if that were the
view full answer... - Wiring 12V Pin on Vehicle 7-Way for Constant Power
- It sounds like you are wanting to wire the 12V pin (typically the pin at the 1 o'clock position) on your 7-Way so that it gets power at all times, even when your tow vehicle's ignition is turned off. To do this you will simply need to run a length of 10 gauge wire like # 10-1-1 (sold by the foot) from this pin at the 7-Way to your vehicle's battery via a 30 amp circuit breaker like # PK54530. This will give you power at the 12V pin of your trailer connector at all times.
view full answer... - Does Install of P3 90195 In 2019 Ram 1500 Require Computer Reprogramming
- For your 2019 Ram 1500 to install the P3 part # 90195 all you need is the install harness part # 3024-P. You wouldn't need to have the computer of the truck changed in anyway.
view full answer... - Electric Trailer Brake Controller Recommended for a 2005 Toyota Landcruiser
- Our most popular electric brake controller for the 2005 Toyota Landcruiser, and one of our top controllers overall is the Prodigy P3 # 90195. This is the top of the line with an LCD and five storable settings.
A more economical recommendation is the Primus IQ # TK90160. It installs within 90-degrees on a vertical plane and only works with electric brakes but is a high quality controller.
If your Landcruiser has the connector under the dash the adapter is # 3040-P. This is the
view full answer... - Hitch, Brake Controller and Wiring for Towing with 1995 Chevrolet Suburban 4X4 K2500 7.4L
- We do not have a single kit/product with all the towing components you'll need to tow a trailer with brakes with your 1995 Chevrolet Suburban 4X4 K2500 with 7.4L engine but we can still get you all set.
To wire a trailer brake controller such as the tried-and-true Prodigy P2 # 90885 in your Suburban you will need only a 4-pole wiring harness (either an existing factory one or you can use # C55319) and our Brake Controller Install Kit # ETBC7. This complete kit includes all the electrical
view full answer... - Tekonsha Prodigy P3 Triggering Viper Alarm 2011 GMC Sierra
- It sounds like you could have wired the brake controller to the wrong circuit. Make sure you have power entering the brake controller on the black wire. On the red wire you will only want power when the brake pedal is pressed. If there is power on the red wire before the brake pedal is depressed you have wired it to the wrong circuit.
I have included a step by step video for your reference.
view full answer... - How To Install Brake Controller On 2018 Jeep JL Without Access To Cold Side Of Brake Switch
- If the 2018 Jeep JL Wrangler has a factory tow package you can just use a Tekonsha Brake Controller p3 part # 90195 with a brake controller harness part # 3073-P to install a brake controller in the Jeep. The harness will plug into a port under the dash and you will not need to worry about hard wiring to the cold side of the brake switch.
If your 2018 Jeep JL Wrangler did not come with a factory tow package, you can install a brake controller two different ways. The easiest way is to
view full answer... - Brake Controller Recommendation for 2020 Jeep Cherokee Trailhawk with Factory Tow Package
- Tekonsha has a brake controller install harness that is a fit for your 2020 Jeep Cherokee with the part # 3014-P but the 3073-P that you mentioned is not a fit so it's not what we recommend.
For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies
view full answer... - What Plug-N-Play Wiring Harness will Fit My 2021 Jeep Gladiator for a Brake Controller?
- If you are looking for a plug-n-play brake controller wiring harness for your 2021 Jeep Gladiator with a 7-way already installed, all you need is the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers # 3073-P. This adapter simply plugs into your built-in port in your vehicle without the need for splicing.
To add a brake controller, I recommend the Tekonsha Voyager # 39510 or the Curt Echo # C51180. Both of these controllers are proportional controllers which means that the
view full answer... - Parts Needed To Install A Redarc Tow-Pro Elite Brake Controller On a 2020 Jeep Gladiator
- Yes, you will need a Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness # 331-TPH-017 to connect the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR and Tekonsha Custom Wiring Adapter # 3073-P.
I have linked an installation video below that shows how all the pieces connect and are installed on your 2020 Jeep Gladiator.
view full answer... - Is Redarc Tow-Pro Elite Plug-And-Play on 2022 Jeep Gladiator With Factory Tow Package?
- Yes it is, the Tow-Pro brake controller is indeed a plug-and-play install without any added wiring needed for your 2022 Jeep Gladiator with the factory tow package. You'll need a couple different parts though, which are the following:
- Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR
- Tekonsha Custom Wiring Adapter # 3073-P
- Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness # 331-TPH-017
Since the Tekonsha adapter doesn't plug into the Tow-Pro Elite
view full answer... - Tekonsha Custom Wiring Adapter and Weight Distribution Drop Shank For Lifted 2022 Jeep Gladiator
- Yes, the Tekonsha Custom Wiring Adapter # 3073-P is the correct harness to mount your Tekonsha Prodigy P3 Trailer Brake Controller # 90195 in your 2022 Jeep Gladiator.
The Curt Weight Distribution Shank # 17120 has the 8 hole mounts that you are looking for. This shank uses the same 3/4" holes that are spaced 1-1/4" on center on your Eaz-Lift R3 weight distribution hitch. This will allow you to level your trailer with your new Gladiator.
view full answer... - Plug-In Custom Wiring Adapter For A 2021 Jeep Gladiator
- Although the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3073-P and the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers # 3035-P may look similar, they do have slightly different connectors.
For this reason, you won't be able to use the # 3024-P with your new Jeep Gladiator, and instead will have to use the # 3073-P that you were looking at.
This plug-in adapter is designed to work with your Gladiator, and is compatible with TrailerMate, Draw-Tite,
view full answer... - How to Install the Redarc Tow-Pro Brake Controller in a 2007 Jeep Wrangler
- To install the Redarc Tow-Pro Elite Trailer Brake Controller in your 2007 Jeep Wrangler you will need the item # RED44FR. This kit includes the universal wiring harness required. The 2007 Wrangler's did not include a port for a plug in adapter so hardwiring the brake controller is your only option.
view full answer... - What Wiring Harness Do I Need to Install the Redarc Tow-Pro Elite on My 2021 Jeep Gladiator?
- In order to use the Redarc Tow-Pro # RED44FR on your 2021 Jeep Gladiator (with factory tow package), you will need the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Jeep # 3073-P. With this wiring harness, you will be able to install the plug into the custom connector in your vehicle.
view full answer... - Will The Tekonsha Custom Wiring Adapter 3073-P Fit A 2022 Jeep Gladiator W/ Tow Package?
- Yes, the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers # 3073-P will be a plug and play installation for your 2022 Jeep Gladiator.
This adapter is compatible with time-delayed and proportional brake controllers from TrailerMate, Draw-Tite, and Tekonsha like your Tekonsha Voyager 9030, or the Tekonsha Primus IQ Trailer Brake Controller.
view full answer... - Brake Controller Plug-and-Play Harness For 2020 Jeep Gladiator
- The Tekonsha Custom Wiring Adapter - Jeep # 3073-P is the product you're looking for.
This adapter plugs into the 5-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
This product is all you need as long as your 2020 Jeep Gladiator is equipped with the factory towing package.
This adapter requires no cutting or splicing of
view full answer... - Which Install Harness is Needed to for Tekonsha P3 Brake Controller and 2021 Jeep Gladiator
- A Tekonsha brake controller install harness 3073 is the same as the harness part # 3073-P which is the correct harness to install a Prodigy P3 # 90195 in your 2021 Jeep Gladiator.
view full answer... - Parts Needed to Add 7-Way to 2018 Jeep JL Wrangler
- We can get your 2018 Jeep JL Wrangler set up with a 7-way, and there are a couple of parts needed, as the only way to add the 7-way is by hardwiring one in. You do have the first part that is required, which is the 4-way, the Curt T-Connector Vehicle Wiring Harness # C56407.
Then, in order to add the 7-way connector, circuit breakers and rest of the hardware needed for installation you will need the following part:
- Universal Installation Kit for Trailer Brake Controller # ETBC7
This
view full answer...
Info for these parts were:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Michael B
Written by:
Alexander C
Test Fit:
Conner L
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.