Brake Controller Recommendation For A 2002 Workhorse P Series
Updated 06/13/2022 | Published 06/10/2022
Products Featured in This Question
Question:
I have a 2002 Winnebago brave 34d on a workhorse chassis and would like to install the prodigy p3 brake controller.What all would I need to do do this install?
asked by: Robert B
Expert Reply:
When it comes to installing a brake controller on your 2002 Workhorse P Series you first need to make sure you have a 7 round electrical harness on the back of your Workhorse. The Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7 includes all the wiring and accessories required for the installation of the trailer brake controller.
After the wiring is installed then The Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional # 90195 will work with your Workhorse. The P3 has a splice in wiring harness which you will have to splice into the # ETBC7, that I mentioned above.
The controller has 3 boost levels that let you adjust initial braking power and aggressiveness. It also has 5 storable settings that let you customize the controller for multiple trailers, varying loads or different drivers. You can mount the controller at 360 degrees.
I attached a review video link below.
(click to enlarge)
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Splice-In
- Under-Dash Box
- Under-Dash
- Up to 4 Axles
- LCD Display
- Multiple Trailers
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Q&A: Is There Downside to Going with 7500 Air Lift Kit Over 5000
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Alternative 7-Way Connector for the Kia R0F67 AC600 on a 2025 Kia Carnival
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug