Part Numbers: K2AVAL8826ELT,65005
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab.
Features:
Specs:
The Detail K2 Elite snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled wireless actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Elite snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
The Elite snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
The electric actuator on this plow allows you to lift and lower the blade using either a toggle switch that installs in your cab or the included wireless remote control.
To raise the plow, use the switch or remote to activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. This simple, chain-lifting design has fewer moving parts than other plow-lifting devices, so the setup is less complicated and there are fewer parts to have to repair or replace.
This actuator lifts and lowers the snowplow blade smoother than an electric winch. In addition, fewer amps are required to run an actuator than to operate an electric winch, which means that the solenoid on the Detail K2 Elite will last twice as long as the solenoid on a plow that uses a winch. There is also a built-in clutch that prevents damage to the actuator if you try to raise the blade too high or drop it too low. The electric actuator is built to withstand extreme temperatures and wet conditions with its completely sealed gearbox and housing.
The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.
Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.
Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (117 Customer Reviews)
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.Love the plow.
Only downside is the outside bottom corners have bent backwards while plowing. I will have to straighten and reinforce those areas. I plow six different driveways. I was using a 4whlr plow for these before and it would take me several hours to all day, with this plow its less than 4hrs including driving time and I have vehicle heat. I've had many people looking, commenting and asking about this hitch system. I recommend it and give them the etrailer site for information and purchasing advice. This system is very impressive. Thank you.
Great products, great prices, fast shipping and a great company to do business with. Easy install, and it took longer to trim the air dam than installing the hitch.
Terrible, they sent the wrong hitch and now want me to pay shipping for the return
I have had this hitch installed for just over a year now on my '99 2-door Tahoe. The install was pretty straight forward, and the hitch itself has held up quite well through a year's worth of abuse. I use it to run my bike rack out the front; the receiver protrudes just below the factory front bumper, maximizing ground clearance when adding length to the front of the vehicle. And as you can see, the kit comes with two sets of hardware in case you want to maintain the factory tow hooks like I have.
Overall great product and fit nicely! I was able to replace the apron and license plate holder afterwards with little modification, just had to cutout for the hitch. The photo shows how I plan to use it so not much stress for the hitch but it feels extremely solid, I’m sure it would be great for winching.
This is the second front hitch I’ve ordered
Works great,looks nice on the vehicle fits tight under bumper like it came from the assembly line of my truck! I use it for my winches and moving trailers around the yard. Very easy install will take less than 20mins to install. I installed them on a 99 Chevy Tahoe and a 97 Chevy pickup. Very fast delivery from etrailer company
Fits perfectly, i like that it comes with the guide wires makes it all go smooth and easy! Install was maaaybe 30minutes and super simple, using it for winch set up, it is perfect (1993 chevy 1500 silverado extended cab) no modifications needed to my truck! Definitely a cheaper solution than to buying a modified bumper for winching. Nice sturdy product.
Peaches is my 95 Chevy and she loves the front hitch it helps to put the trailer right where I want
The unit exceeded my expectations. The fit was perfect. I also greatly appreciated the extra long bolts so that I could reinstall my OEM tow hooks. Those pulling wires are ingenious !
This plow does not stand up to much use. I used it for my long gravel driveway and I was dissapointed in the durability of the plow. The plow bent near the cutting edge and twisted when I accidentally bumped into a rock when turning around. This plow is for light use only and it does not back drag snow well since it is light and does not have any down pressure.
Front receiver hitch 94 Chevy 1500 4x4 only took 1/2 hr for installation no problems.
Daryl H.
3/25/2019
Great product, I used it to push snow Meyer home plow and move various trailers around.
Although it's a front hitch, when delivered, the sticker on the hitch says "not for front installation". Nice hitch and we installed it anyway, however it sat so high on our 1995 Suburban that the bike blocked the driver's view so we weren't able to use it in the front after all
Mike L.
9/25/2022
I cant speak to the purpose of the sticker you describe. Draw-Tite confirms that this hitch is a confirmed fit for your vehicle and is indeed designed for use as a front mounted receiver hitch.
I ordered this trailer hitch, and UPS received it the same day. Delivered in 2 days and fits perfectly. 1997 Chevy k1500
drawtite front hitch receiver that bolts directly without modification onto vehicle and works smoothly for placing wagon in its small back corner storage space in a cramped storage yard.
Etrailer as usual did an amazing job. Shipping was fast. Product was easy to install. The wires provided were a huge help with getting the bolts aligned properly. My only regret is that there isn't enough projects and money at my house to order more things from etrailer, but they are always my first click when looking. Thank you guys keep up the outstanding work.
Easy to put together,easy to put it on and take it off my truck, works like it should
part had a delay in shipping
It was easy to install and I amv very satisfied and would recommend this company and its products.
Simple install looks nice and hidden up there in front
Great hitch, fit my 98 Chevy K2500 like a glove. The only thing I'd change is to include 4 longer bolts for people who have tow hooks like my truck has. Had to buy longer ones.
I'm truly satisfied with the font hitch for 99 GMC Yukon and I will keep shopping with etrailer
Excellent fit packaged well was able to leave lower engine cover on and tow hooks would purchase again
it fit my 2000 GMC with out trouble. but did remove the wind dame
Super easy install. My 7 year old am I did it in 20 minutes with cutting the lower bumper plastic to fit. Nice to retain the factory tow hooks with supplied hardware.
Overall a very good quality build. There was only one hiccup in installing that I call an oversight on the manufacturer. The front bolt can not be simply dropped in place because the bumper brackets inside the frame rail are in the way. it's close, but the head of the bolt can't get past it. Only 2 ways around it. remove the entire bumper to be able to remove those brackets, OR do what I did and grind off a little bit on the side of the carriage bolt head to get it to slide past the bracket. what little I had to grind off isn't going to be enough to compromise any weight or load capacity rating. easy enough fix for me, but if you don't have a way to grind the head down the installation will require removing the bumper and brackets. Took about an hour from start to finish. Had to trim just a little bit of the license plate bracket, no big deal.
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
GMC C/K Series Pickup Accessories
Katrina D.
2/28/2024
I am sorry for any confusion. I do see that this hitch is only designed to fit the GMC Sierra 1500 for the years 1988 - 1999. Since your vehicle is a 2021 GMC Sierra 1500, it is not a confirmed fit. I did, however, find part # DT44HR, which has the same specs as this hitch, that is a confirmed fit for your vehicle.