Front Hitch Recommendation for 2000 Chevy Silverado K2500 4x4  

The Draw-Tite Front Mount Trailer Hitch Receiver #65005 has mounting hole dimensions that all measure 30-3/8" on center. The trailer hitch also measures 26" on the inside of the mounting brackets. I have attached a photo for…

The most economically priced front mount hitch for your 1997 Chevy 1500 4x4 that we carry is the Draw-Tite Hitch #65005. You will be able to retain your factory tow hooks with this hitch also. I attached a link to all of the winch plates we offer…

I'm attaching a photo to this page of the Curt Front Mount Trailer Hitch Receiver #C22NR installed, but this is from the instructions as we haven't had the opportunity as of yet (September of 2023) to install this on a 2023 Chevy…

On the Bulldog Winch Truck Winch Roller Fairlead #BDW20002 the mounting hole spacing, measured hole center to hole center, is 10-inches horizontally and 3/4-inch vertically. I took these measurements myself in our warehouse. Usually only the upper…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The overall height of the Timbren Spring Kit part #TGMRCK25D is 6-1/4 inches.

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

For your 2024 GMC Sierra 3500 we only have the Curt front hitch part #C52NR as a confirmed fit. When this hitch is installed it hangs below the front bumper like what you can see in the attached picture.

The Curt Front Mount Trailer Hitch Receiver #C52NR will fit your 2024 GMC Sierra 2500 AT4 but you will need to trim the rock guard in order for the hitch to fit.

I attached a picture of how the Draw Tite front hitch part #65063 installs and it uses the tow hooks to bolt through the mounting plate of the hitch to the truck frame. Since you have the area available where the tow hooks install I'd recommend…