2027 Mazda CX-50 Mud Flaps

Hello Mike, Thank you so much for the detailed information, most helpful! For the leaf springs, you will want to go with (6) of the 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR. Since you have 7K axles, these are the…

Hey Marcus, congrats on the new truck! Since your Silverado 3500 has the B&W Turnoverball item #BWGNRK1016, I recommend the B&W Companion item #BWRVK3500. This hitch has a 20,000 lbs capacity and will connect directly to the square gooseneck…

Hey Steve, yes a Rock Tamers mud flap kit like the part #RT47VR would work with the Weigh Safe adjustable ball mounts part #WS68RR and #WS56ZR. The ball mounts have enough clearance on the shank to allow the Rock Tamers to fit.

Hey Dan, yes the Access Rockstar Custom Mud Flap part #A62ZX does fit your 2023 GMC Sierra 3500HD AT4. This is a confirmed fit for the dually and non-dually models of the truck.

Hey Jon, happy to help. Yes, I was able to find the replacement parts to #BM44YR. The 90 degree angle #BM99RR and the check valve #BM98GR have 1/2" MPT fitting that connect directly to your B&B RV Water Center. So no worries about…

Hi Eric; the WeatherTech Mud Flaps #WT110108-120108 will fit your 2024 Ram 2500 if you do not have fender flares or lip molding. If you do have fender flares or lip molding the #WT53UR will fit as long as you don't have running boards within…

Hey Brad, since your 2024 Chevy Silverado is a gas engine and not a diesel you would not need a heat shield with the RockTamers part #ERT00110. It's really only the diesel models that put out hot enough exhaust to require the heat shield #RT76FR.…

Hi Steve, I went out to our warehouse for you and measured the shank of the WeightSafe Safe Load Gooseneck Hitch part #WS27MR and the B&W Gooseneck Hitch Ball from the ball and safety chain kit part #BWGNXA2061 confirmed to fit your 2025 Ford…

Hi Steve, The Curt Hitch Receiver Reducer Sleeves - 3inch to 2-1/2inch or 2-inch part #C45408 has a pin hole diameter of 3/4". However, since this is adapting all the way down to a 2 inch, you'll need to use a 5/8" pin because the pin…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The correct Rock Tamer Mud Flaps for a 2020 Chevrolet Silverado 2500 is part #ERT00108 for 2" hitch receivers or part #ERT00110 for 2-1/2" hitch receivers. If you don't know what size trailer hitch receiver you have, just measure the…

Hi Dennis; Fogatti doesn't offer any control codes or specific processes for high elevation with the InstaShower 9 Pro #FG33FR. Here is what they say about high altitude use: If it exceeds 5,000 ft, it shall comply with the requirements of…