2025 Chevrolet Silverado EV Lamp Guards

Hey Pete, we have just what you are looking for with the Firestone Ride Rite kit part #F2255 and then for an automatic leveling compressor kit you'd want the part #F2186-2047 and you'd be set! What will you be towing? My neighbor had a diesel…

Hey William! I don't have a way of knowing how much space there is on a 2023 Gladiator without one here to test it. What I can tell you is that the #FR95DJ measures 2-5/8" long x 50" wide x 21-11/16" tall so you can use those…

We no longer carry the Air Lift SmartAir II Automatic-Leveling Compressor System, however I have an alternative that I think works better and is less expensive. It is the Firestone Automatic, Single-Gauge Pneumatic Height-Control Valve w/ Compressor…

The overall height including the cap for the DeeZee Truck Bed Auxiliary Tank #DZ91752X that you referenced is 22-1/2 inches. We've found that it typically fits pretty easily under tonneau covers like what you see in the attached picture, but you…

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

Hey Dave, thanks for reaching out! The panels for the etrailer Hard Tonneau Cover #e73DR are about 21" wide, and when folded up in your 2024 Ford F-350 Super Duty they will take up about 2' when you include the other parts of the cover.

The correct Yakima OverHaul HD Truck Bed Ladder Rack for a 2023 Toyota Tacoma with RetraxPRO XR Hard Tonneau Cover like part #RTT-80851 is the part #Y01151-5755. This is an excellent combo which allows you to haul elongated gear on top of your cover…

Generally speaking, most leveling kits lift the front of the truck 1-2" to match the rear as the factory ride height on most pickup trucks nowadays is about 2" lower in the front than in the rear. This is usually to compensate for squatting…

It sounds like you would like to add a trailer brake controller to your 2022 Hyundai Santa Cruz to use along with the Curt Trailer Hitch Receiver #C23WR. The first thing you will want to add, in addition to the trailer hitch, is wiring. You are going…

The Curt Trailer Hitch item #C23WR and the Draw-Tite Hitch item #DT48GR are almost identical and are both confirmed to fit the 2023 Hyundai Santa Cruz. The main differences between the two hitches are that the Curt is made in the USA and the…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Greetings Tim; when you choose a WDH you want to go off of the tongue weight of your loaded setup. The best way to find this is to measure with a scale like the #BTBRV44FR. Since you provided the specs for your trailer we can take a guess to help…