Headlight Protection Film Specs:
Features:
Apply LampGard to your headlamps, fog lamps, turn-signal lights or parking lights and never worry about scratching, cracking or pitting again. This tough, UV-resistant cover installs in seconds directly to the lamp surface for complete protection.
Installation Notes:
Designed for vehicles with LED Headlamps
More Information >Headlight Protection Film Specs:
Features:
Apply LampGard to your headlamps, fog lamps, turn-signal lights or parking lights and never worry about scratching, cracking or pitting again. This tough, UV-resistant cover installs in seconds directly to the lamp surface for complete protection.
Installation Notes:
Designed for vehicles with Halogen Headlamps
More Information >Headlight Protection Film Specs:
Features:
Apply LampGard to your headlamps, fog lamps, turn-signal lights or parking lights and never worry about scratching, cracking or pitting again. This tough, UV-resistant cover installs in seconds directly to the lamp surface for complete protection.
More Information >Videos
for Headlight Protection Film
Help Articles
for Headlight Protection Film
Expert Answers
for Headlight Protection Film
Hey Kevin! Starting with a hitch I recommend the etrailer Trailer Hitch #e98842. This is a Class III hitch with a 2" receiver and a bolt-on installation. Based on the information you have given me I'm assuming you don't have factory…
view full answer...Hey Larry! Yes, the Curt #C97RV is the same as the 13614 which is confirmed to fit your 2025 Buick Enclave. Also yes, the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector #C76RV is the right part to add a 7-way. This is the same…
view full answer...Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…
view full answer...Hello Edward, Great choice on the Timbrens for the rear. Since all of your weight is in the rear of the truck I do not think that it is necessary to put them on the front, even with hauling a 7,000 pound trailer. All of the focus is on the tongue…
view full answer...Hey Paul! The Curt #C97RV and #C66RV are the correct parts to set up your 2025 Buick Enclave for towing. It looks like you already figured out that the #C56394 will also fit and save you a bit of money since you placed an order with this instead. We…
view full answer...Hey Robert, we had the chance to install the Demco Duo part #SM99251 on a 2022 Ford Maverick and we didn't have any issues. If you check out the attached install video you'll see the entire process. I laughed at your skirt joke, but instead…
view full answer...Hello Josie, thanks for reaching out. The Curt Trailer Hitch Receiver #C97RV will add 41 lbs to the vehicle.
view full answer...Hey Darin, the 30k and 25k versions of the Curt PowerRide fifth wheel hitches use different leg and head kits so they are not interchangeable. If you wanted to upgrade to a 30k hitch you'd need an all new hitch with the part #C48BR. Do you have a…
view full answer...Hey Rick, I went through the install instructions of the Roadmaster Direct Connect base plate kit part #RM97RR and you actually trim out a whole in the shutters and reinstall them. They are not totally removed. Do you have a tow bar already?
view full answer...Hey William! I don't have a way of knowing how much space there is on a 2023 Gladiator without one here to test it. What I can tell you is that the #FR95DJ measures 2-5/8" long x 50" wide x 21-11/16" tall so you can use those…
view full answer...Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…
view full answer...Both styles of Demco couplers are going to hold up well but in general cast steel is considered to be better due to it's uniform and more consistent structure it provides. Stamped steel is typically considered a more cost effective solution due…
view full answer...Contact and Help
What our customers are saying:
I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex
Alex
Blowing Rock, NC