Hey Michael. I do not have a wiring diagram for a 2026 Crown Signia so I can not identify those wires. Your SUV does indeed have PWM system for the LED lights. To install the Curt Powered Tail Light Converter item #C59236, you'll need to use a…
Hey Nina. The ARB Custom Fit Bondi Deluxe Front Bumper item #ARB66DM is not rated to be used for flat towing. I checked our other options that fit your 2023 Jeep Wrangler and we do not have one that is rated for flat towing. To flat tow your 2023…
Hi Bill; are you talking about a hitch where only the receiver is visible at the rear like the #C22HR for the Pilot? This is the same hitch pictured below. The Curt Trailer Hitch Receiver #C69RJ is confirmed to fit your 2026 Honda Passport RTL and…
Hey Rich. I do not have the installation instructions for the etrailer Hitch item #e97ZV. Curt manufacturer's our hitches so the instructions for their item #C72ZJ will be identical to the ones included with our etrailer Hitch item #e97ZV. I do…
Yes, the correct plugs/covers for the factory prep package on a Ford Super Duty is going to be the Rubber Hole Cover for Reese Elite Series Under-Bed Gooseneck Trailer Hitch part #RP30136 for the hitch ball hole and the Replacement Puck Plug Covers…
The Reese gooseneck ball hole cover part #RP30136 that you referenced is the correct replacement for the ball hole cover of your 2016 Ford F-350 that has the OEM rail kit.
The replacement plug covers you need are the Replacement Puck Plug Covers #58199 which are a fit for the factory pucks you have in your 2014 Ford Super Duty.
In order to cover the pucks on a 2015 Ford F-350 you can use the Replacement Puck Plug Covers part #58199. In order to cover the hitch ball hole on a 2015 Ford F-350 you can use the Rubber Hole Cover part #RP30136.
Reese manufactures the OEM 5th wheel/gooseneck hitch for Ford, so the Reese #RP30136 you had looked at is the correct cove for your Ford OEM gooseneck hitch. For the OEM 5th wheel pucks, you'd use the Reese #58199. I've confirmed this with my…
Hi Eryk; we haven't had a VW ID-Buzz come in yet to install the #DT33KV so I can't say for sure. Those measurements for clearance are almost never available from the manufacturer so we have to get them ourselves. From some other videos and…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
