2010 Ford F-150 Raptor Trailer Hitch

With tow package use 74682 for wiring

Features:

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

Installation Notes:

No drilling required for installation

Spare tire will need to be lowered or removed temporarily for hitch installation

Vehicles with a full size spare stored under the vehicle will not be able to store spare underneath after hitch installation

CURT Class 4 Trailer Hitch - 2010 Ford F-150 Raptor
without factory hitch

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Installation Difficulty:

3 out of 10

273 reviews

Made in the USA

Made in USA

Code: C14002

$197.09

Retail:$299.95

You Save: $102.86

In Stock

Trailer Hitch Size:

2 Inch Hitch Opening

Towing Capacity:

1000 Pound Tongue Weight

10000 Pound Towing

Weight Distribution Towing Capacity:

1200 Pound Tongue Weight

12000 Pound Towing

Trailer Wiring:

With tow package use C56110 for wiring

Features:

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

Installation Notes:

No drilling required for installation

Spare tire will need to be lowered or removed temporarily for hitch installation

Vehicles with a full size spare stored under the vehicle will not be able to store spare underneath after hitch installation

TorkLift Class 5 Trailer Hitch - 2010 Ford F-150 Raptor
with factory hitch

TorkLift SuperHitch Hero Trailer Hitch Receiver - Custom Fit - Class IV - Dual 2" Receivers

Installation Difficulty:

6 out of 10

5 reviews

Made in USA

Code: TLF1005H

$716.09

In Stock

Trailer Hitch Size:

2 Inch Hitch Opening

Towing Capacity:

800 Pound Tongue Weight

8000 Pound Towing

Weight Distribution Towing Capacity:

1500 Pound Tongue Weight

15000 Pound Towing

Trailer Wiring:

With tow package use 74682 for wiring

Features:

Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty hitch that works with your factory hitch to give you 2 stacked receivers. The SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.

Installation Notes:

No drilling required for installation

Hitch is designed to fit Short Bed models

Hitch is designed for vehicles with factory hitch rated to 10,500 lbs; it does not fit vehicles with factory hitches rated to 11,500 lbs

Vehicles with a full size spare stored under the vehicle will not be able to store spare underneath after hitch installation

CURT Class 3 Round Tube Trailer Hitch - 2010 Ford F-150 Raptor
without factory hitch

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Installation Difficulty:

3 out of 10

13 reviews

Made in the USA

Made in USA

Code: 13371

$162.91

Retail:$279.95

You Save: $117.04

In Stock

Trailer Hitch Size:

2 Inch Hitch Opening

Towing Capacity:

600 Pound Tongue Weight

6000 Pound Towing

Weight Distribution Towing Capacity:

1100 Pound Tongue Weight

11000 Pound Towing

Trailer Wiring:

With tow package use C56110 for wiring

Features:

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

Installation Notes:

No drilling required for installation

Spare tire will need to be lowered or removed temporarily for hitch installation

Vehicles with a full size spare stored under the vehicle will not be able to store spare underneath after hitch installation

CURT Class 3 Trailer Hitch - 2010 Ford F-150 Raptor
without factory hitch

Installation Difficulty:

3 out of 10

51 reviews

Made in the USA

Made in USA

Code: 13368

$147.39

Retail:$250.95

You Save: $103.56

Trailer Hitch Size:

2 Inch Hitch Opening

Towing Capacity:

600 Pound Tongue Weight

6000 Pound Towing

Weight Distribution Towing Capacity:

1000 Pound Tongue Weight

10000 Pound Towing

Trailer Wiring:

With tow package use C56110 for wiring

Features:

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

Installation Notes:

No drilling required for installation

Spare tire will need to be lowered or removed temporarily for hitch installation

Vehicles with a full size spare stored under the vehicle will not be able to store spare underneath after hitch installation

Choosing the Right Trailer Wiring

Explore Expert Info

on Trailer Hitch

Videos

for Trailer Hitch

Help Articles

for Trailer Hitch

Expert Answers

for Trailer Hitch

Ultimate Overview of the No-Drill Mount for Electrical Mounting Bracket

Step-By-Step Installation Tutorial for the etrailer Trailer Hitch Receiver on a 2024 Toyota RAV4

Mount: etrailer Trailer Hitch Receiver on a 2024 Subaru Crosstrek

Step-By-Step Installation Tutorial for the etrailer Trailer Hitch Receiver on a 2023 Toyota RAV4

How to Install: Draw-Tite Max-Frame Trailer Hitch Receiver on your 2024 Subaru Outback Wagon

Setting up the Curt Trailer Hitch Receiver on a 2024 Toyota RAV4

Curt T-Connector Vehicle Wiring Harness Review C56040

Comprehensive Review: etrailer Hitch Pin Alignment Collar for…

Curt T-Connector Vehicle Wiring Harness Installation - 2024 Toyota RAV4

Installation Guide for the Curt Trailer Hitch Receiver on a 2024 Kia Sportage

Setting up the Curt Trailer Hitch Receiver on a 2023 Toyota RAV4

Brake Controller 7- and 4-Way Installation Kit (ETBC7)

My Trailer Hitch…

Trailer Wiring Diagrams

How to Measure for Trailer Hitch Drop

Best Bike Racks for Electric Bikes

Rooftop Cargo Carriers

Trailer Hitch Installation Tips

Wiring Trailer Lights with a 7-Way Plug…

How to Correct Noise from Exhaust Rattling Against a Trailer Hitch

5 Things to Know About Weight Distribution Hitches

Ball Mount Basics: Weight Capacity, Class, and Size

Trailer Hitch Receiver Sizes

What is the Difference Between a Class II and a Class III Hitch?

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

What is the Difference Between a 4-Way and 7-Way Trailer Connector

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

What Hitch Do You Recommend for a 2024 Toyota RAV4?

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a…

Difference Between Curt…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

What Is An OEM Prep Package And How Do I Know If I Have It

The OEM prep package consists of 4…

Differences Between Curt, Draw-Tite, and etrailer.com Trailer Hitches for 2019 Subaru Outback Wagon

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a…

Comparing the Curt Hitch C13416 and EcoHitch Hitch 306-X7396 for a 2019 Toyota RAV4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear…

Comparing Curt and Draw-Tite Trailer Hitch Receivers for 2022 Hyundai Tucson

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

TorkLift Tie-Downs For a 2021 Chevrolet Silverado 3500 Crew Cab Long Bed Diesel

This will depend on if you have a Dually #TL94PR or Single #TL67DR rear wheels on your 2021 Chevrolet Silverado 3500 long bed. These are a fit for the factory receiver, if you have or want to switch to a TorkLift Receiver #TL74FR this would use a…

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a…