Truck Grilles Specs:
Features:
Get that cool "black-out" look for your vehicle with Putco's Boss grille insert. Rustproof aluminum is black powder coated for a rugged, fierce appearance. Fits over your existing grille for quick, easy installation.
More Information >Videos
for Truck Grilles
Help Articles
for Truck Grilles
Expert Answers
for Truck Grilles
When you say "Bike started to come off the back of the trailer" does that mean that you are using the T2 Pro XTR #TH69TX on the back of a…
view full answer...The Thule T2 Pro XTR 2 Bike Hitch Mounted Folding Rack, item #TH83JV, will accept up to 5 inch wide tires but, unless you have over 1 inch of clearance between the fender and the front tire on your cruiser with a fender, you will not be able to…
view full answer...You are right that the strap you mentioned isn't the correct fit, and I checked with Thule and there isn't a standalone strap available for a T2 Pro XT,…
view full answer...The Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F95FV will be just fine if you need to lift your 2022 Ford F-250 Super Duty, but it will be good practice to lower the psi rating to 5 prior to lifting the truck. I confirmed this…
view full answer...When adjusting the arms of the #BWRVK3305, you have the option of setting up so the king pin will sit 3 inches forward or 1 inch forward of the axle. I'd set it up at the tallest height, 18-3/4 inches…
view full answer...You will want the hitch to be set at the height that 1) allows the trailer to be level, and 2) allows you a minimum of 6 inches between the bottom of the trailer loft and the top of the bed rails. The fifth wheel hitches offer several inches of up…
view full answer...The Furrion 2-in-1 Range Oven with Glass Cover #FR97KR is actually really close to the dimensions of your 21 inch Magic Chef so this would be an easy and great replacement solution that would fit perfectly.
view full answer...I went out to our warehouse to measure the Valterra EZ Valve Double Electric Waste Valves part #E84-8 for you. The wire lead on the actual valve is about 8-1/2" long whereas the wire lead on the…
view full answer...We don't have the specific number but what I think will be more helpful for you is the distance from the rear most portion of the bumper to the hitch pin hole. Which for the #41932 that dimension is…
view full answer...Great question! The 2 gallon container of EXP90 adhesive included with the LaSalle Bristol XTRM Roof Install Kit #3442703414KIT will cover about 400 square feet (200 square feet per gallon).
view full answer...The P3 brake controller, #90195, will go into a sort of sleep mode after it detects no movement for 15 minutes. While it is on it does not draw very much power. What you can do to make sure it goes to sleep is exit the truck after turning it off,…
view full answer...For your 1989 Chevrolet 3500 K series truck you will want the B & W Gooseneck #BWGNRK1000, which has mounting hardware specifically designed for your truck. I have added a link that shows all of the…
view full answer...