Fender Trim Specs:
Features:
...Aries rear fender flares for Jeep Lightweight, rustproof aluminum construction 5-1/2" Wide Textured black powder coated finish Custom fit for your vehicle Solid, bolt-on installation Mounting...
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Installation Notes:
Drilling required for installation
Tech Tip:
Designed for installation with Aries rear fender flares, AA2500201 or AA2500202.
More Information >Fender Trim Specs:
Features:
...hardware included Some drilling may be required Quantity: 2 fender flares 3-Year warranty...
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Features:
...Aries rear fender flares for Jeep Lightweight, rustproof aluminum construction 5-1/2" Wide Raw finish can be painted for custom look Custom fit for your vehicle Solid, bolt-on installation...
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Features:
...hardware Textured black finish Specs: Quantity: 2 Dimensions: Front fender: 6-7/16" wide Wall tube: 1-1/2" diameter x 1/8" thick 1-Year limited warranty...
Installation Notes:
Drilling required for installation
More Information >Fender Trim Specs:
Features:
...hardware included Some drilling may be required Quantity: 2 fender flares 3-Year warranty...
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Features:
...Mounting hardware included Some drilling may be required Quantity: 2 fender flares 3-Year warranty...
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Features:
...included Some drilling may be required Quantity: 2 fender flares Limited lifetime warranty...
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Features:
...finish Specs: Quantity: 2 Dimensions: Rear fender: 4-7/8" wide Wall tube: 1-1/2" diameter x 1/8" thick 1-Year limited warranty...
Installation Notes:
Drilling required for installation
More Information >Fender Trim Specs:
Features:
...applications Quantity: 2 fender flares, 2 lights, and mounting hardware Limited lifetime warranty...
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Installation Notes:
Drilling required for installation
Tech Tip:
Designed for installation with Aries front fender flares, AA1500201 or AA1500202.
More Information >Fender Trim Specs:
Installation Notes:
Drilling required for installation
Tech Tip:
Designed for installation with Aries front and rear fender flares (AA1500201 and AA2500201) or (AA1500202 and AA2500202).
More Information >Videos
for Fender Trim
Help Articles
for Fender Trim
Expert Answers
for Fender Trim
No, I am sorry as there isn't a base plate that I can guarantee would also fit with this grille guard. Often they will be using the same space or attach in the same places. What type of bumper does your Jeep have? I am happy to…
view full answer...Hi Kerry; the 339894 is actually still an active part. The correct replacement motor is the Replacement Electric Motor Assembly for Lippert Coach RV Steps #LC63BX which is the same as the 339894.
view full answer...The lights you referenced in the photo for the Aries Front Fender Flares #AA1500201 wouldn't be factory lights. There is a similar product available for your 2012 Jeep Wrangler Unlimited that work with the aforementioned Fender…
view full answer...We have what you need. I will list them below for you. The Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin #BX88357 for your 1 inch D-rings. The etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates - RV Mount -…
view full answer...For a bumper mounted spare carrier that has capacity for an 80 lb setup we have the part #BR56VR from Brophy that fits a 4 inch bumper like you have and would work well.
view full answer...The center of the hitch pin hole for the Draw-Tite Max-Frame Trailer Hitch Receiver #DT37GR is 6" further out than the center of the hitch pin hole for the Curt Trailer Hitch Receiver #C76WR. Since the hitch pin hole determines…
view full answer...If 380 pounds is the tongue weight of your trailer, then you are correct. You add the tongue weight of the trailer to bike rack and bikes, and that total is your total tongue weight. Make sure you are within the tongue weight capacities of both…
view full answer...Yes, it does. The arm on the Kuat Pivot 2 Swing Away Hitch Extender item #PVD20B locks at 90 degrees and opens up to 120 degrees. I have attached a photo below that shows how this function works.
view full answer...Using a hitch extender is safe as long as you stay within the limits specified of 50 percent of the hitch and vehicle load capacity, and 350 lb tongue weight capacity of part #HE06. The other option to provide additional clearance from your spare…
view full answer...For your 2022 Jeep Wrangler, the twist locks (the base plate tabs) will indeed connect to the end of the arms on the etrailer SD Non-Binding Tow Bar #e34ZR. You'll connect that directly to the Invisible Base Plate Kit #e98948.…
view full answer...Hi Dave, The etrailer Invisible Base Plate Kit #e98948 and Blue Ox Base Plate Kit #BLU53FR are designed slightly different, but both are compatible fits for your 2023 Jeep Gladiator. The #e98948 is going to be an easier installation since you…
view full answer...Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…
view full answer...Filter Products (12)
Contact and Help
What our customers are saying:
This site is top notch: Great prices, great service. Highly recommended.
Scott
Lafayette, CO