2014 Cadillac Escalade Fluid Filters

The best suspension enhancement for a 2023 Mercedes-Benz Sprinter 2500 & 3500 are the SuperSprings Stabilizer, and the part number that fits both the 2500 and 3500 is the following: -…

Yes, you will. The longer length of the K-Source Custom Extendable Towing Mirrors item #KS62147-48G over the factory mirrors requires you to drill an extra hole for an additional support. These mirrors are confirmed to fit your 2018 Chevy Silverado…

There's no safe way to actually increase the towing capacity of a vehicle. There's things that can help a vehicle tow…

The "radio" fuse of your 2014 Honda CR-V will need to be pulled and replaced with the Roadmaster FuseMaster Fuse Bypass part…

The local shop is wrong. According to the owner's manual for a 2013 Honda CR-V you can flat tow the vehicle behind a motorhome with all 4 wheels on the ground. Not only that but the manual…

Yes you can absolutely use the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs #LC182895 with your TorkLift tie downs.

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

Yes, the Superchips Flashpaq F5 Performance Tuner #SU1845 will work for your 2003 Ford Explorer V8 4.6L. The SU1060 that you mentioned is an older model that came with a separate color display that can be mounted on the dash, and while this would…

The Mini Tire Inflator - 12 Volt #PT60400 can provide up to 100psi of tire pressure, so this will work on your tire that requires 70psi without any issues.

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive…

The Edge Pulsar V3 L5P Inline Tuner with Insight CTS3 Monitor #EP34KR allows for higher power numbers than the Edge Pulsar L5P Inline Tuner with Insight CTS3 Monitor #EP29YR. This is because it utilizes the more updated version 3 of the Pulsar…

We have the 2.5 inch version of the B and W Tow and Stow for MultiPro tailgates with part #BWTS20066BMP but at this time (May 2020) we are still waiting on the 2 inch version to be released.