Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey, Mark! That’s a great question! I took a look at the Maxxis tire and wheel combo, part #MXS67FR, and they measure 27" in diameter. We size our tire covers based on the actual tire size, not the cover itself. The etrailer tire cover, part…
Hey Raymond, since the 5k rated etrailer jack part #e55ZV is rated higher than the 3.5k option you also mentioned it will work a little bit quicker since it won't be working quite as hard. With that said it's not a fast jack by any means. It…
Hi Chris! I would be shocked if the wheels have a 5 on 5 bolt pattern. I don't think I have ever seen a 12" wheel with that bolt pattern. They will typically have a 5 on 4-1/2 bolt pattern and I would encourage you to have him look at the…
Hello Eric, The #K2R35DKG is Dacromet-coated, and the calipers are treated with KodaGuard. The #K2R35DS, on the other hand, is made entirely of stainless steel, hence the higher price. If you're in an area where road salt is common or if…
I recommend mounting the Low Profile LED Flood Light #OPT64FR on the upper frame of your trailer. This light is 2" tall and will broadcast the light down at a 45 degree angle. The housings are made of aluminum to help protect the light from…
I have attached a photo for you that shows how a 7-way trailer connector is wired. If you take a look at the trailer side trailer connector you will see a terminal labeled "12V Power". If you were to run a wire part #10-1-1 (per foot) from…
Hey Leonard, yes the USB Power Outlet for RVs part #37215115 that you referenced can be used in a car application. It was designed to wire to a 12 volt power system like what a vehicle would have so it would work just as well there.
I can definitely understand your frustration as the Fulton F2 Swing-Up Trailer Jack with Dual 7" Wheels, Sidewind -1,600 lbs F1413100334 is not a cheap jack so it would be nice to replace the plastic housing part number 9 in the included diagram…
Custer work lights are perfect for illuminating spaces like band trailers and loading ramps. Known for their reliability and brightness, these lights are a great choice for anyone needing consistent and powerful lighting solutions.
Custer work lights are designed to provide bright, consistent illumination, making them perfect for trailers. They effectively light up loading ramps, ensuring safe and easy loading and unloading, even in the darkest conditions.
Custer work lights are built to withstand frequent use. They are robust and reliable, ensuring they perform well over time, even with regular use in demanding environments like band trailers.
Yes, Custer work lights are designed for easy installation. They come with straightforward instructions and necessary hardware, making it simple to set them up and start using them right away.
Custer work lights are known for their impressive brightness. They effectively illuminate large areas, making them ideal for tasks that require clear visibility, such as loading and unloading trailers.
Custer work lights are built to handle various outdoor conditions. They are weather-resistant, ensuring they continue to perform well even when exposed to elements like rain or dust.
Filters
