Vehicle Lights - Reverse Light, EVO Formance

Hey George, the correct set of Westin R5 Nerf Bars for your 2026 Chevy Silverado 2500 double cab long bed would be the part #W63FQ which is stainless steel like you are needing as well. Are you up north with a lot of snow and don't want steps…

Hey Mark, This is going to be a great option to add to your fleet. The cam lock cylinder is uses is in fact the standard 3/4" cylinder and it is replaceable. I double checked that Paclock cylinder for you as well and you are going to be able to…

I attached a picture that a coworker of mine took that shows the dimension you are looking for on the part #BVC0573-31. Looks to be right at 2-3/4 inches.

A #93 incandescent bulb has a single contact bayonet base, and there are a couple of options for LED bulbs that will replace these. You can choose a bulb that gives off either a warm or cool light; I have added a photo showing the difference between…

Lippert does sell the motor separately but unfortunately not the leg unit. If you are needing the leg unit then you will need to purchase the entire rear jack. Thank you for the picture and your description. Between the Replacement #LC305339 and…

The total weight of the B and W Companion Slider Hitch part #BWRVK3370 that you referenced is 266 lbs.

Hey Bob, The TorkLift Cannon Hitch Extension #TLE1648 would be a good option if your F-350 has the factory 3" Ford receiver hitch and you're needing 48" of extension. You can measure to figure out the correct length needed, with or…

We do not have this item in stock for me to measure its thread pitch but two of us estimated it as being 6 or 7 threads per inch. I linked a photo of the instructions to replace this part. The bearing is removable and is available as a replacement…

The Stallion Jack brand is not directly compatible with anything we carry. The closest thing we have is the Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks - 12K #TJD-12000-RODNUT which is 3-1/2 inches x 3-1/2 inches. I…

In order to use 17.5" diameter trailer wheels you'll need to upgrade to 9/16" lug studs. There are no other options as all wheels this size use this size or larger since they are designed for more weight. In order to do this you'll…

We have a few options for door latches that might be good replacements for yours. There is the Bauer Products Manger Door Lock for Horse Trailers #BA95FR. This is designed for a vertical oriented door latch. We also have a horizontal opening style.…

A 31 inch diameter tire and wheel would be no issue for the wheel carrier portion of the Lippert Underchassis Double Bin Storage Carrier part #LC125460. Basically as long as the weight of the wheel and tire is less than 150 lbs this would work well.