Trailer Trim - TRC

Hey Jeff, the C part of the #PF98FR is 1-1/8 inch wide so it would fit over a 1 inch square tube.

Hey Jeff, thanks for reaching out. I just went out to our warehouse and measured the P&F Products J-Channel Rail for Enclosed Trailers #PF26FR. The interior dimension of the J-channel I measured at 0.17". What thickness plexiglass were you…

Yes, Rob - that’s one of the big advantages here with the PingMaster trailer tracker systems. The 3000 with WiFi backup #PM84FR, 5000 #PM64FR, and 5000 with WiFi backup #PM74FR are completely self-contained. They mount using the built-in magnet or…

Yes, it is! The RV Flooring Adhesive for Vinyl Over Wood, Metal, or Concrete item #TS58FR is freeze-thaw stable to 15° F and would have to be heated up to at least 212° F once it has dried and cured. What kind of trailer do you have?

Hello Mark; we do offer a variety of fender lights, so we very well may have a replacement for you. We do not have a direct replacement for the P2 05 S90 light that you mentioned though. After searching for a few pictures of these lights, what I saw…

Hi William! Thanks for the picture of your axle tag. The correct bearing kit is the #BK3-200 with a 10-36 grease seal. If you want the Dexter version it is the #DX58ER, Are you getting your Momentum ready for spring/summer? Any big trips coming up?

We no longer carry the plug 38-751114. But this can be acquired from Ultra-Fab directly.

Appreciate the photos, and yes, the trim you asked about does look to be exactly what you are needing: - Even Rub Rail Trim for Enclosed Trailer - 1-1/2" Tall x 1/8" Deep - Aluminum #36284-955 This trim is 93-1/2" long, so if…

Hey, Bruce. That's a really great question. The distance between the mounting holes on the JR Products Hook and Keeper #37210444B is 1" side to side and 2-3/16" from top to bottom. This is pretty standard hole spacing, so if you’re…

I recommend using the 601 Flooring Adhesive in a 1 Gallon #TS76FR or 4 Gallon #TS26FR depending on your application. The 601 does not have the pressure sensitive requirements of the 801, 1 Gallon #TS86FR and 4 Gallon #TS58FR adhesives.

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…

Hi Sofia! Yakima Tracks for Roof Racks can definitely be installed on the roof of your Tacoma. Well, as long as you have over 54" of roof to work with, so I do recommend measuring your roof to make sure you have enough room. The Yakima 54"…

Hey Jeff, the C part of the #PF98FR is 1-1/8 inch wide so it would fit over a 1 inch square tube.

Hey Jeff, thanks for reaching out. I just went out to our warehouse and measured the P&F Products J-Channel Rail for Enclosed Trailers #PF26FR. The interior dimension of the J-channel I measured at 0.17". What thickness plexiglass were you…

Yes, Rob - that’s one of the big advantages here with the PingMaster trailer tracker systems. The 3000 with WiFi backup #PM84FR, 5000 #PM64FR, and 5000 with WiFi backup #PM74FR are completely self-contained. They mount using the built-in magnet or…

Yes, it is! The RV Flooring Adhesive for Vinyl Over Wood, Metal, or Concrete item #TS58FR is freeze-thaw stable to 15° F and would have to be heated up to at least 212° F once it has dried and cured. What kind of trailer do you have?

Hello Mark; we do offer a variety of fender lights, so we very well may have a replacement for you. We do not have a direct replacement for the P2 05 S90 light that you mentioned though. After searching for a few pictures of these lights, what I saw…

Hi William! Thanks for the picture of your axle tag. The correct bearing kit is the #BK3-200 with a 10-36 grease seal. If you want the Dexter version it is the #DX58ER, Are you getting your Momentum ready for spring/summer? Any big trips coming up?

We no longer carry the plug 38-751114. But this can be acquired from Ultra-Fab directly.

Appreciate the photos, and yes, the trim you asked about does look to be exactly what you are needing: - Even Rub Rail Trim for Enclosed Trailer - 1-1/2" Tall x 1/8" Deep - Aluminum #36284-955 This trim is 93-1/2" long, so if…

Hey, Bruce. That's a really great question. The distance between the mounting holes on the JR Products Hook and Keeper #37210444B is 1" side to side and 2-3/16" from top to bottom. This is pretty standard hole spacing, so if you’re…

I recommend using the 601 Flooring Adhesive in a 1 Gallon #TS76FR or 4 Gallon #TS26FR depending on your application. The 601 does not have the pressure sensitive requirements of the 801, 1 Gallon #TS86FR and 4 Gallon #TS58FR adhesives.

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…

Hi Sofia! Yakima Tracks for Roof Racks can definitely be installed on the roof of your Tacoma. Well, as long as you have over 54" of roof to work with, so I do recommend measuring your roof to make sure you have enough room. The Yakima 54"…