Videos
for Trailer Ramps
Help Articles
for Trailer Ramps
Expert Answers
for Trailer Ramps
The Bulldog 2 Speed Jack part #BD183902 could pretty easily replace a Holland 2 speed jack if that's what your trailer has. This jack has a tubing width of 4 inches like what your jack currently has so the mounting brackets should…
view full answer...The Kodiak Oil Cap #KPCAP you are looking at is a replacement cap for the Kodiak Pro Lube Kit. The oil cap you need is the Redline Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles #RG04-230. This will replace the oil cap on your trailer axles…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...If you already have a seal that you're replacing then you want to get a seal that's a similar size, otherwise if it's a brand new application then I recommend trying to find the depth of the gap and…
view full answer...The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3"…
view full answer...Based on the weight of your 2021 R-Pod 195 the Fastway e2 part #FA92-00-0450 would be rated too low and wouldn't be effective. You would need to go about the higher rated #FA92-00-0600 which is rated for 250-600 lbs. Your loaded and…
view full answer...The Pollak Connector PA66GF30 I believe is the same if not similar to the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket part #PK11893. If that is the case you can use the Mounting Bracket part #PK12711U and Curt No-Drill Bracket for…
view full answer...I really wish we had replacement parts still for the Atwood couplers but since they've been out of business for so long we don't have any way to get the parts you are wanting.
view full answer...The B&W Extend-A-Goose Gooseneck Coupler, part #BWTEXA4200 you referenced is designed to be able to attach to the inner tube on a gooseneck trailer and provide an additional 10 inches of clearance from your truck cab for your trailer.…
view full answer...For replacement Dexter manual adjust brake assemblies to replace your 36-19 you would want the part #23-27 for the right hand side and part #23-26 for the left hand side. These are manual adjust 10 by 2-1/4 inch Dexter brake assemblies that would…
view full answer...Since the Dragon's Eye LED Clearance Light #DG52505VP that you referenced grounds through its mounting hardware you will want to actually add a ground wire with some 12 gauge wire like #12-1-1. You will need to attach the wire at one end…
view full answer...I would be glad to help you find a roof top rack for your trailer. I recommend the Rack'em Fitz-All Enclosed Trailer Ladder Rack item #RA-28. This rack fits trailers from 4' to 8-1/2' wide, which will accommodate…
view full answer...