Hello Desiree, thanks for reaching out. We have just the thing! For your 2023 Chevy 2500 High Country Diesel I recommend the following: - Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F64XV This…
Hey Dave, thanks for the pictures! Based on what you have and what you are looking for the Tie Down Spare Tire Mount part #TD66FR that you referenced would be a great option. This is very similar to what you have now so it would do a great job.
Hey Phil! For a tandem axle trailer you will want two of the Leveling Kit with Wheel Chocks for Trailers and RVs #WS28ER. You are correct, one under each tire is best. I use these on my Jayco with one under each tire to keep them off the ground and…
Hey Derek, thanks for the picture! The SeaSucker Universal Recovery Board Mount - Vacuum Mount item #SEA39XR is going to work great on your setup. These will have no problem attaching to the aluminum sides. It's not going to delaminate the…
First we need to find out if the problem is your tow vehicle wiring or your trailer wiring. To do this use a circuit tester like part #PTW2993 to test all of the pins on your 7-way for the correct function compared to the diagram I attached. Next use…
Yes, the Blue Ox Hitch Receiver Immobilizer II #BX88224 that you referenced can be used while towing a small trailer as long as the hitch on the vehicle has a 2 inch opening. We have confirmed with Blue Ox that you can use this product in towing…
The Buyers Products 24" Fluorescent Orange Marker Kit #3371308103 are a hollow Nylon construction. They are pretty rigid/sturdy and are designed to be used on vehicles.
You could for sure. You would however want to make sure that the fender is reinforced enough to support the Markers #3371308103 so that they don't just rip the metal or plastic of the fender. I'd get some flat metal from a local home…
You'll need to remove the ring terminal screws that hold the white wires of the #8880162 to the trailer but then the other connections simply plug into the female matching end on the trailer since it uses bullet connectors.
Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Randy
Watkinsville, GA
Performance Tool Traction Boards for Mud, Sand, Snow
When you spin on ice or bog down, these traction boards step in to get you moving from mud, sand, or snow. Performance Tool keeps them compact for easy storage, so they're ready for emergencies without taking space. They aren't designed for leveling when folded or for holding camper weight—use jack pads for that job.
Yes, they store compactly, and the hinges collapse the mats down for storage. Check that your intended storage spot fits their folded size. Fold them for storage only, not for supporting weight.
No, they aren't going to work as levelers when folded. The hinges are meant to collapse the mats for storage and aren't set up for weight to be placed on them. Use dedicated leveling gear for that job.
No, they do not work well for campers in that way. To prevent an unlevel camper in sandy soil, use a larger footplate on stabilizer jacks to evenly distribute the weight. A bigger footprint helps reduce sinkage.
Yes. They're made for recovering vehicles from mud, sand, and snow, and have moved a camper van off ice when placed under the front wheels. Position them under the drive wheels. If you don't get traction, reposition the boards and try again.
Filters
