Hey Edgar, so we have pretty similar designs to the part #TP48KR in different colors that are the same size. For darker we have #TP98KR More like a light gray #TP78KR Lighter tan #TP68KR Darker brown and leather #TP32KR
Hi Jeanette; the Thomas Payne Trifold RV Loveseat and Sleeper - 80" Long #LC64FC is the only thing we have in the Canvas Back Granite color. The closest match with any kind of furniture is the Thomas Payne Dual Reclining RV Loveseat #TP98KR…
Hey Ralph! The Thomas Payne RV Jackknife Sofa w/ Hinges, Hardware #TP76KR requires at least 3" of wall clearance to function properly. Are you upgrading your sofa or did the old one wear out?
Hey Jeff! Yes, the Thomas Payne Seismic Right Arm #TP62AR, Left Arm #TP65AR, and Armless RV Recliner #TP63AR will all connect. Together they will form a complete couch. Just make sure you have 82-1/2" for this to fit in your 2023 Grand Design…
Hey Frank. I checked our specs and with Lippert and the Thomas Payne Seismic Power Loveseat w/ Console item #TP65KR requires a 26" wide entryway. This couch comes in three separate pieces but the seats still measure 27.5" wide x 38"…
Hey Nicholas, the front to back depth of the sleeping surface of the Thomas Payne Sleeper Sofa part #LC94FC that you referenced is 70 inches. Is that big enough?
Hello Chris, Thanks for reaching out. I completely understand wanting to confirm this before installing, especially with tight aisles and wall clearance. When the Thomas Payne RV Jackknife Sofa #TP58KR is upright, it measures 30" deep, including…
Hi Mark; according to Lippert the Thomas Payne RV Jackknife Sofa #TP86KR is a "wall hugger." This means it can sit right up against the wall in the upright position. You don't need a certain amount of space behind it.
Hey Katy, congrats on your new trailer. The Thomas Payne RV Jackknife Sofa w/ Hinges item #TP58KR measures 64" wide x 3" deep x 23" tall when it's completely assembled. You can add the Universal Leg Kit for Thomas Payne RV…
Hi Randy, You can for sure use the Gen-Y Installation Bolt Kit for Gen-Y 5th Wheel to Gooseneck Adapters part #GY86FR to install the Gen-Y Hitch Shock Absorbing 5th Wheel part #GY33GR on your camper. While the mounting holes are in different…
Hey Nancy! The Thomas Payne RV Jackknife Sofa w/ Hinges #TP58KR doesn't have any legs. It is designed to sit on an existing base/legs which you can see examples of in the attached picture. I can't tell in the brochure if that is what you have…
Setting up an 80 inch wide couch or chair gives you generous seating without crowding your RV layout. Installation can be simple, with pieces that go through an RV door; assembling inside helps with tight 28 inch openings. Expect comfortable, robust seating ready for the next trip.
Yes, it can be used in a home. Measure your room for the full 80 inch width and check depth with recliners or a sleeper extended. Verify your doorway and hall clearances for the separate pieces, then assemble in the room where it will live.
They're reported as surprisingly comfortable and well made. Assembly is straightforward and the sections are easy to handle. After setup, sit-test and snug down any fasteners to reduce movement on travel days.
A tri-fold sleeper of this size lists a 72 inch bed width. Confirm the listed bed width on the one you're choosing and make sure there's room to fully extend it. Check aisle clearance so the folded-out bed doesn't block drawers or doors.
Yes, it can when brought in as separate pieces and assembled inside. One 80 inch tri-fold loveseat went through a 28 inch door by carrying the sections in first. Measure your doorway, remove obstacles, and plan to assemble inside the RV. Keep hardware handy and tighten everything after assembly.
Filters
