Radiator Fans - 12 Inch Diameter, Flex-a-lite

Hey David, the Derale transmission cooler part #D15200 that you referenced does not come with a thermostat or any install kit components but if you wanted a similar option that does have all of that you would want the part #D15500.

That's pretty hard to give an exact answer on but with the install of the Derale Electra-Cool Combo Engine and Transmission Cooler Assembly w/ Fan #D15200 you'd see the fluid stay right around 175 degrees in traffic on a hot day since the fan…

Each of the fans of the Flex-a-lite Dual 13-1/2" Electric Radiator Fans w/ Shroud #FLX295 can flow up to 2,300 CFM. Also worth mentioning is that the likelihood of one of the fans failing is very low.

Hey Dalton, that is correct. The standard rotation on radiator fans like the part #FLX6715 is clockwise.

Many of the Grand Design Imagine RV's are pre-wired for the Furrion Vision S Wireless RV Backup Camera System. This is available in two different configurations; #FOS43TASF for 4.3" or the #FOS05TASF for a 5"monitor. These are both…

Hello John, Yes, the Hellwig Adjustable Big Wig Rear Anti-Sway Bar - 1-1/4" Diameter #HE87FR will come with everything you need to install it on your 2017 Ram 2500, except the tools needed. I just installed a Hellwing rear ant-sway bar on our…

In regards to the Derale Thermal Fan Clutch with Reverse Rotation part #D22140, the distance from the mounting surface to the end of the shaft is 1-13/16" and the distance from the mounting surface to the end of the clutch is 1-3/4". I went…

The correct hub and drum assembly to use with the Dexter Trailer Axle Beam with E-Z Lube Spindles #6340624 is the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ. A set of this hub and drum have a 5,200 lb capacity just like the axle, has an E-Z…

Hey Brian, yes the grease seal of the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles #AKHD-545-35-EZ-K is designed to prevent grease from getting on the brake components. But what I would guess happened to you is that you overfilled the hub…

The Dexter Trailer Hub and Drum Assembly, part #84546UC3, is a trailer hub and drum with the lug nuts, bearings, bearing races, grease cap and grease seal included. It is designed to fit 3,500-lb axles. After removing your old drum and cleaning the…

We will have several different pre packed hub assemblies for you to choose from depending on if you need a hub for drum brakes or hubs for an idler axle. Here is a list of hubs for both drum and idler axles in the different bolt patterns that use the…

Hey Jairo. So we do not offer a direct replacement for the Norcold N611, but we do have a good replacement option for you. It really comes down to what will fit in your cutout space. Take a look at the Norcold RV Refrigerator w/ Freezer - 8.2 cu ft -…