Hey Steve, are you looking for a kit like the part #MC22YR? This repairs the brackets that hold the shades by replacing them. This is a kit that works with the day time and the night time shades like you are looking for.
Hey Kristoper, we have just what you need with the Dometic Furnace part #DMC54RR which has exact same dimensions as what you had at 16 1/2" W X 7" H X 20" D and also this has same 30k BTU rating so it will work perfectly for you. How…
Hello Kayla, I am so glad you wrote in to us! I was able to confirm with MCD Innovations that you will need the MCD Innovations RV Shade Repair Kit - Solo with Steel Brackets - Switch Controlled Motor #MC82YR to replace your current motor…
Hi Dennis; MCD doesn't have a set number of turns to install the MCD Innovations RV Shade Repair Kit #MC74SR. What you want to do is add some tension, test it, then adjust accordingly until you have it set the way you want it.
Our closest options for the seals you have pictured are part #SR43FR and #SR63FR. You'll want to take a quick measurement of the seals you have to ensure that these will match up and properly seal your windows. I've attached pictures of their…
Hello John, thanks for reaching out. According to my research, the Atwood 8525-IV-DCLP is a 25,000 BTU furnace. We do have a 25K BTU unit from Dometic that can be used to replace this, but it would not be a direct replacement. Take a look at the…
You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
Yup. The #M357FR is a recessed/flush footprint so you'll just trace the cutout size of 11-5/8" wide x 8-3/4" tall, pilot your corners, and deburr the opening. Use a gasket/sealant bead, and you’ll get that sleek “factory” look! One…
Hey John! To find the right kit you will need to measure the inside diameter of your roller tube. If it is 1-1/8" (28mm) you need the #MC44SR and if it is 11/16" (17mm) you need #MC24SR.
Lippert removed the old sticker gauge from their Trailair Air Ride pin boxes #LC158778 because they were receiving a lot of complaints about it not matching up with the smoothest ride depending on the trailer. Since the pressure needed for the air…
Filters
