Hey Michael! The 2026 Kia Sportage Hybrid has the 12V battery integrated into the main battery so you won't be making a connection there. What you need to do is run the #C59236 hot lead to the 12V positive jump terminal under the hood. Everything…
Hey Edwin, The Skylight #SR89YR will work perfectly fine with your 1-1/4" thick roof on your 2018 Lance 1575, though they typically will require some trimming to the garnish to fit perfectly. You will want to pick up 2 tubes of self leveling…
We have had a similar question to this come up and we were able to determine that the number AS-13 M-VDO449 that you listed is stamped on the vent cover part #BVD0449-A01. If you are looking for the entire fan setup and not just the cover you would…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Hey Chris! Yes, Dicor Self-Leveling Lap Sealant #DC94SR is a great choice for installation of the Overlander Expansion Kit #GP76AR. You will also want to pick up some butyl tape #DC38SR. The butyl tape will go under the mounting brackets, and…
Hi Chase, welcome back! For the shackle straps and bolts I recommend the MORryde Suspension Upgrade Kit. This comes with wet bolts, bronze bushings, and 1/2" thick shackles. These parts will likely last as long as the trailer, and you won't…
Hey Scott, thanks for reaching out. If you're looking for a lid for your MaxxFan 4700G, you can use one of the MaxxAir UniMaxx Universal Replacement Lids. We have them in Translucent Smoke Item #MA00-335002 or #MA00-335001 for white. If you are…
Welcome back Chris. The original MaxxFan 5100k fans couldn't handle the extra voltage from Lithium batteries and the boards would burn out. A green light would come on and beep after the fan runs for only a few seconds, which sounds like exactly…
The Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is meant to be a direct replacement however not all the necessary hardware is included. The remaining items you'll need is the Key Wall Control part #MA00A03550K,…
You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
Hi Craig! The Replacement Shroud for Dometic Brisk RV Air Conditioner - Polar White #DMC27BQ is not the correct replacement shroud for you Brisk II air conditioner. Instead, you should use Replacement RV Air Conditioner Cover for Dometic Brisk Air II…
In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…
Very easy process, good prices and my products were shipped on time and were delivered on time. The instructional videos online helped make installation easy!
Ryan
Portland, OR
RV Vents and Fans from RV Designer
When it's time to upgrade, RV Designer RV vents and fans make straightforward replacements. Fit can be perfect and they can look more sturdy than the original vents. If you need airflow control, check whether a register includes an adjustable damper, since some covers are open all the time.
Yes—these can look more sturdy than the original vents. If you want a beefier feel, choose this style. Compare the appearance to your current vent to match the look and durability you expect.
Not always—some are an open all the time vent cover with no adjustable damper. Verify whether an adjustable damper is included or if it's a fixed, always-open cover. If you want airflow control, look for a visible slider or damper noted in the description.
Some covers are open all the time with no adjustable damper. If you need to shut or reduce airflow, check that an adjustable damper is clearly called out. If that's not shown, expect continuous airflow through the vent.
It can fit perfect. Match the register style to what you have, especially if you expect a closable damper versus an open cover. If it's described as an open all the time vent cover, plan on constant airflow.
Filters
