RV TV - 768p

...1080P - 2 HDMI - # JEN42RR - 32" 110 Volts Jensen LED RV TV - 720P - 2 HDMI - # JEN96VR - 32" 12 Volts Jensen LED RV Smart TV - 768P - 2 HDMI - # JEN92RR - 24" 12 Volts Jensen LED RV Smart TV - 768P...

I spoke to my contact at ASA Electronics and she told me the Power Adapter Cord for Jensen LED Televisions - 12V DC #DCCIG09 is the correct replacement for your Jensen JE1908 TV.

Yes, since the Jensen TV you mentioned part JE3212LED is a 12 volt LED television the replacement power cord part #DCCIG09 is the correct replacement power wire.

Hey Shawn, congrats on the new 5th wheel trailer. The Watchdog Power Center Surge Protector and Voltage Booster item #HU74ZR is all you're going to need. Adding in the Power Watchdog Surge Protector item #HU82VR would be redundant. The item…

Good thinking, Andy good name btw. The Watchdog Surge Protector / Voltage Booster 50A #HU74ZR is a hefty unit, but it does sit outside at the pedestal, so security matters. It has a metal loop built in for a padlock or cable lock, which you can run…

Hey Mark, we have the RetraxPRO MX part #RT80485 that is a confirmed fit for your 2024 GMC Sierra 3500 long bed. The fit of this is not based on the OEM puck kit as that would not affect anything related to the cover. Are you wanting to cover a fifth…

It sure does Brian. The Lippert Hub and Drum Assembly item #LC57DX will indeed work with a threaded grease cap. It has a hub bore of 2.722". This hub is designed for 8,000 lbs axles and has a 8 on 6-1/2 lug pattern. It fits spindles with a inner…

Hey David, do you mean to cut the plug off of the Watchdog Power Center Surge Protector and Voltage Booster #HU74ZR and then wire it to your RV outlet? If so, it would be just a matter of cutting and stripping wires to pull this off.

Hey Bob! The High Pointe Built-In RV Convection Microwave #HP49ZR will fit right where your EC028KD7 is now with the same holes. This is actually the 520EC028KD7S so it shares the same model number and is a direct replacement. It also includes the…

Hey Chad, Good question and you will need spacers for your 2024 Toyota Tundra with the factory lift when installing the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL24JQ. The rear lift on the Tundra is 2 inches…

Hey Leroy. The Hardwired Mounting Kit for Hughes Autoformers 50 Amp Voltage Booster item #HU34FR, includes a 5' long plug and cord. What kind of trailer do you have?

Hey Michael. The backup camera that comes with the Furrion Vision S+ System item #FR57AD has built in mounting holes in the casing. It comes with four #6 x 3/4" flat head self-tapping screws, four #4 x 1/4" self-tapping screws, sealant, and…