Hey David, thanks for reaching out! The closest combination we can get for you is the SmartPlug RV/Marine Data Port Inlet #SM36MJ and then getting the Keystone Single Jack Ethernet Connector #SM38MJ along with the ethernet adapter for your Starlink…
Hey John, we have 30 amp twist in power inlets from other brands like Hughes part #HU66VR but at this time we do not have a Furrion brand option. What drew you to the Furrion?
Hey Larry, the Smartplug part #SM96MJ is the correct part you are looking for as this has ability to have an ethernet connection for your Starlink and a coax for the cable connection. For the ethernet connector you would need the part #SM38MJ and…
Hey Kevin, thanks for reaching out! At this point in time SmartPlug hasn't made a special connection for the Starlink internet system, but they do have their SmartPlug RV/Marine Data Port Inlet #SM36MJ. From my understanding Starlink has an…
Hey Jesse! If it's just the LED light strip that's peeling off, then I recommend picking up some strong adhesive double-sided take and securing it back in place with that, but if you're talking about the "bar" that the light…
Hi Aaron, The mounting holes are 2.44 inches (2-7/16 inches) both across and vertically for the SmartPlug RV/Marine Data Port Inlets. This is available in three different colors: - White: SmartPlug RV/Marine Data Port Inlet #SM66MJ - Black: SmartPlug…
Hi Monty, The mounting holes for the round cable hatch #A10-2130VP will not be covered by the SmartPlug RV Power Inlet and Connector - 30 Amp #SM27FR. I've added a photo below of the mounting dimensions of the #SM27FR and as you can see they are…
The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…
The high pressure alarm of your TPMS system should be set at 20-25% over your normal tire pressure and the low pressure alarm should be set at 10% below your normal tire pressure so that you can address the issue before it becomes a problem. For the…
As long as you aren't exceeding the speed rating of the tires which would cause them to get to an excessive heat you are fine. Trailer tires are designed to be inflated to their max PSI rating when cold and then the pressure increase from heat…
Trailer tires always indicate their rated psi-pressure on the sidewall. Trailer tires should ALWAYS be inflated to this COLD psi rating under all conditions. It is never appropriate to under- or over-inflate a trailer tire for any reason, such as to…
Hey Diana, it's pretty rare to find trailer jacks that have the narrower inner tube like you need so if you can have your coupler modified to fit the 2 inch size not only would you be able to use the part #e88GV that you referenced but its going…
Filters
