You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a…
Since the Atwood 31013 LP Detector has been discontinued you can replace it with the RV Propane Gas Detector - 12 Volt - 2 Wire - Black #RS44FR. This detector is a surface mount design and can easily swap out your old unit in just a few minutes.
Harvey, you’re right on target asking about sizing. The AFMD35121 was a 35k BTU unit that’s been discontinued. You can step into the 35K BTU #DMC74MR furnace by Dometic, but it is 2 inches taller than your current one. Most folks just enlarge the…
We do have a couple of options to replace your Atwood 36636, and you can use either, with the only difference being the color: - RV Propane Gas and Carbon Monoxide Detector - Black #RS54FR or White #RS34FR Either will work perfectly as replacements…
I wasn't able to find the Atwood 36720 RV Propane Gas Detector you mention, however I was still able to find the RV Propane Gas Detector #RS64FR in white, or #RS44FR in black to work as a replacement for your Protechtor Series 2001 LP Gas…
Hi Brenda, The Atwood 31013 unfortunately has been discontinued so you'd need to go with a completely new LP gas detector. We have a couple of surface mount style detectors that come with trim rings that will cover the old unit's cutout hole…
Hey Jeff, thanks for reaching out! Yes, if you buy the RV Propane Gas and Carbon Monoxide Detector #RS54FR right now in 2025 and install it, it will last until 2030. Did your last detector go out, or are you just looking to get your RV ready for…
Hello Dennis, You can use your current Chinese races, and just get the bearings from the Timken Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal #TMK32VR. You will want: - Inner bearing: Timken Replacement Trailer Wheel Bearing -…
Reliable RV Safe Propane Detectors for Peace of Mind
Explore RV Safe propane detectors, perfect for replacing discontinued models like Atwood. These detectors are easy to install, fit various setups, and ensure safety in your RV. Ideal for Airstreams and other RVs, they offer a sleek design with options to cover existing holes seamlessly.
Installing an RV Safe propane detector is straightforward. Many find it takes about 15 minutes, with the design allowing it to cover existing holes from previous models. It requires only a small hole for the wires, making it a hassle-free upgrade for your RV.
RV Safe propane detectors are excellent replacements for discontinued models like Atwood. They come with multiple faceplates to fit various setups and offer a flush design that doesn't protrude, ensuring a neat and efficient installation.
Some RV Safe detectors have a translucent case with a bright status LED, which can illuminate the RV at night. While this ensures visibility, it might be too bright for some, so consider placement to minimize nighttime disturbance.
Yes, RV Safe propane detectors are versatile and can fit a range of RV models, including Airstreams and Newmar. Their design allows them to cover existing holes, making them a flexible choice for various RV setups.
Choosing RV Safe propane detectors ensures reliable safety with easy installation and compatibility with various RV models. They offer a sleek design that covers existing holes and are a trusted choice for replacing older, discontinued detectors.
Filters
