Welcome back Jim! The Yakima FlipFlop High-Low Adapter item #Y64MX will indeed work to help lower the deck height on your cargo rack. It'll lower the 2" receiver connection by 2-1/8". The Yakima FlipFlop item #Y64MX has a 350 lbs weight…
Hey Jimmy, the Thomas Payne Signature Dinette Cushion #TP99AR that you referenced is sold as enough cushions for one chair basically. So if you wanted to complete a set for the left and right benches you'd need to order a quantity of two of…
Hey Dennis, thanks for the picture! The Telescoping Dinette Table Leg item #TX73VJ does not have a size limit for the table top. 52” x 32” is going to be completely reasonable depending on the material. You can use whatever top best fits the space…
Thanks for letting us help Michael. For the leaf springs, I'd recommend the 4-Leaf Double-Eye Spring #e54SR. This is a 25-1/4-inch double-eye spring that's a great fit for your 3,500-lb axle. If you haven't already planned on it, I'd…
Hey Margaret. The brackets of the Replacement Leg Kit for etrailer RV Dinette Tables item #e79RR are made of metal not plastic. The bracket base measures 6-5/16" in diameter by 2-1/4" tall. The leg itself is 28-1/2" tall overall with…
Hello Matt, Thanks for writing in, that’s a great question. I’ve definitely heard the same concerns about the factory leaf springs on these, especially on larger toy haulers like your Wolf Pack. It makes sense to want something that’s going to hold…
Hey Grant, the Telescoping Dinette Table Leg with Adjustable Top and Large Base for RVs #TX73VJ that you referenced was not designed to be removable easily like you are wanting.
Hey Lisa! I did some digging online and while I don't know what the exact bolt mount dimensions are for your Lagun table leg, I do believe that the Telescoping Dinette Table Leg #TX73VJ uses the same 4" on-center 6-bolt pattern (see attached…
Hey Chris, that information is what we need to confirm. I reached out to Lippert with that LCI number and the response was you have a 1621 with 15.5k weight capacity. Curt Flex Air 5th Wheel Pin Box #LC328492 is going to be a direct replacement and…
The Everchill RV Refrigerator #324-000119 is the closest size refrigerator we have which will fit into the cutout for your Dometic RM1350. Your refrigerator fits a 63-3/16" tall by 32-3/4" wide and 26-1/16" deep opening. The Everchill…
Hey Tom, welcome back. I can do two out of your three requests. We do not have any options that fold up into the wall for storage. I have listed the 72" couches with beds we have below: Thomas Payne RV Jackknife Sofa and Kickboard - Fold Down -…
Welcome back Jim! The Yakima FlipFlop High-Low Adapter item #Y64MX will indeed work to help lower the deck height on your cargo rack. It'll lower the 2" receiver connection by 2-1/8". The Yakima FlipFlop item #Y64MX has a 350 lbs weight…
Hey Jimmy, the Thomas Payne Signature Dinette Cushion #TP99AR that you referenced is sold as enough cushions for one chair basically. So if you wanted to complete a set for the left and right benches you'd need to order a quantity of two of…
Hey Dennis, thanks for the picture! The Telescoping Dinette Table Leg item #TX73VJ does not have a size limit for the table top. 52” x 32” is going to be completely reasonable depending on the material. You can use whatever top best fits the space…
Thanks for letting us help Michael. For the leaf springs, I'd recommend the 4-Leaf Double-Eye Spring #e54SR. This is a 25-1/4-inch double-eye spring that's a great fit for your 3,500-lb axle. If you haven't already planned on it, I'd…
Hey Margaret. The brackets of the Replacement Leg Kit for etrailer RV Dinette Tables item #e79RR are made of metal not plastic. The bracket base measures 6-5/16" in diameter by 2-1/4" tall. The leg itself is 28-1/2" tall overall with…
Hello Matt, Thanks for writing in, that’s a great question. I’ve definitely heard the same concerns about the factory leaf springs on these, especially on larger toy haulers like your Wolf Pack. It makes sense to want something that’s going to hold…
Hey Grant, the Telescoping Dinette Table Leg with Adjustable Top and Large Base for RVs #TX73VJ that you referenced was not designed to be removable easily like you are wanting.
Hey Lisa! I did some digging online and while I don't know what the exact bolt mount dimensions are for your Lagun table leg, I do believe that the Telescoping Dinette Table Leg #TX73VJ uses the same 4" on-center 6-bolt pattern (see attached…
Hey Chris, that information is what we need to confirm. I reached out to Lippert with that LCI number and the response was you have a 1621 with 15.5k weight capacity. Curt Flex Air 5th Wheel Pin Box #LC328492 is going to be a direct replacement and…
The Everchill RV Refrigerator #324-000119 is the closest size refrigerator we have which will fit into the cutout for your Dometic RM1350. Your refrigerator fits a 63-3/16" tall by 32-3/4" wide and 26-1/16" deep opening. The Everchill…
Hey Tom, welcome back. I can do two out of your three requests. We do not have any options that fold up into the wall for storage. I have listed the 72" couches with beds we have below: Thomas Payne RV Jackknife Sofa and Kickboard - Fold Down -…
Ready to refresh your dinette? The cherry wood laminate brings a beautiful look, and installation is straightforward with a good fit. Pair a tabletop with dual support legs for a solid setup that doesn't rock or wobble.
No, custom sizes are not offered. Measure your existing top—length, width, and thickness—and choose the closest listed size. If you already have legs, confirm the new top's mounting area accepts your leg hardware. For bed conversions, match the size to your cushions and support spacing.
They can be very solid when supported correctly. If you want to reduce rocking or wobble, look for setups that use dual support legs or a sturdy base. Make sure the leg spacing and mounts line up with your floor or sockets. Re-tighten hardware after install to keep things snug.
Installation is straightforward for most setups. Pre-fit the base and mark holes before drilling, and use basic hand tools to avoid stripping fasteners. Verify that your floor or pedestal sockets align with the new top. If reusing legs, confirm the bolt pattern matches the underside mounting plate.
Yes, as long as the tabletop length, width, and thickness match your existing setup. Measure the current top and compare to the listed dimensions. If your dinette drops down to make a bed, confirm your support layout (like 2 legs or wall brackets) matches the new top. Check that the new top's edging and corners fit within your cushion footprint.
Filters
RV Dinette Table Parts or Accessories
