RV Cargo Slides - 70-1/4 Inch Long

Hi Kev; the MORryde RV Cargo Sliding Tray with the 80% extension is only available at 72" long x 48 " wide #MR52FR. If you're alright with a 60% extension we have the MORryde RV Cargo Sliding Tray - 60" x 48" #MR85FR.

...Hey Mike, thanks for reaching out. The 60" x 23" dimension listed for the # MR87ZV cargo tray is the overall dimensions of the tray. The inside dimensions of the tray are 58-1/4" long x 19-7/8" wide...

Charles, it looks like the Predator 5000 generator you have is a bit a too big so it's not going to work with the MORryde RV Generator Slide Out Tray #MR89RR. You'd need to use a bigger tray like the MORryde RV Cargo Sliding Tray #MR37FR…

I spoke with MORrdye, and they said that they do not have a dimensional drawing of the screw holes as their attachment uses TEK screws. They go on to mention that they've never had an issue reported as long as all the attachment points are used…

I checked online and your Predator 5000 inverter measures 25" L x 18" W x 20.8" T. The closest slide out tray we have is going to be the MORryde RV Cargo Sliding Tray item #MR37FR. It has internal dimensions of 34-1/4" long x…

Hey Alan, we actually have a kit for exactly what you are looking for with the part #HYD44VR. This kit was designed for converting a trailer with tandem 5.2k axles to electric over hydraulic disc and comes with everything needed so it's a one…

I checked online and your Predator 5000 inverter measures 25" L x 18" W x 20.8" T. The closest slide out tray we have is going to be the MORryde RV Cargo Sliding Tray item #MR37FR. The MORryde item #MR37FR has internal dimensions of…

For your 35.12" x 19.49" Dometic CFX3 75DZ dual zone cooler, I recommend the MORryde RV Fridge Tray item #MR69UR. It has internal dimensions of 21-1/8" long x 35-1/2" wide so your cooler will fit perfectly. The best feature of…

Hey Troy! I have listed all of the dimensions available for the Rail Kit for Kwikee RV Storage Slide Out Tray Assembly item #LC370793 you were looking at. Not sure what you mean by clearance so if these do not answer your question go ahead and…

The MORryde Sliding Tray for RV Cargo Compartment #MR44FR has 1.57" of clearance before the tray starts. If you are needing more clearance than that the MORryde Sliding Tray Height Adjustment Kit #MR34VR will allow you to raise the tray…

Hey Jeff, thanks for reaching out! What you're looking for is the Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers #HYD44VR. This comes with the rotors, calipers, brake lines, ad an electric over hydraulic (EOH) actuator so…

The overall width of the MORryde RV Cargo Sliding Tray - 72" x 20" - 2 Way Slide - 80 Percent Extension - 500 lbs part #MR74FR is 19.74" which is measured from the outside of each rail on either side. The tray width is only…