Hey Robert, the Access tonneau cover part #A24AU can work with a ladder rack but it has to be one that attaches to the top of the bed rails and not one that wraps around them like the Yakima Overhaul. For a ladder rack that installs like that the…
Hey Justin, thanks for reaching out! I went out to the warehouse and confirmed that the Curt Adjustable 2-Ball Mount #C79NR measures 12-1/4" from the center of the hitch pin hole to the center of the hitch ball. Not sure what tape measure Curt…
Hey Nathan, Unfortunately there is not a standard size tire that comes on those trailers so I do not have a way of knowing exactly what size is on yours. You would need to measure the pilot diameter of the original wheels or the spindle on the axle…
Hey Kyle! We do have the B&W Tow & Stow Pintle Hook with 2" and 2-5/16" Balls. If you have a 2" hitch you need #BW67BR and for a 2-1/2" hitch #BW77BR. The pintle hook capacity on the 2" version is 16k and then 21k for…
Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…
Thanks for reaching out, Alex! The Yakima OutPost HD Overland Truck Bed Rack #Y01152-58 will be too short to fit the MOLLE Panel #Y98DJ, but you can use the SideBar Rails, Short Bed #Y01153 or Long Bed #Y01154, if you'd like to add some cargo…
Hey there Tim, either the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - Black #MA86JR or the MaxxAir FanMate RV and Trailer Roof Vent Cover - 26-1/2" x 18-1/8" x 10-1/4" - Black #MA00-955002 will fit your Maxxair fan model…
Yes, they will Aaron! The Inno Square Crossbars item #INB147 will indeed fit the older Thule 450 Crossroad roof rack. They measure 58" long x 7/8" tall x 1-1/4" wide, which is the same size but it doesn't have the track in the…
Hey Micah! Pacbrake has actually been around for a long time, more than 60 years. We have had customers ask for these air bags in the past, and we've seen them on vehicles coming in. Until now, Firestone has been the go to since their quality is…
The Yakima SideBar Rails cannot be cut as the assembly does in fact involve one bar sliding into the other like you mentioned and it would not be structurally sound, but there is a short bed version of these rails, which is the SideBar Rails for…
Hey Greg, what's interesting about the Ark Xtreme Off-Road Jack #ARK99FR that you referenced is that number you can adjust the height of the jack relative to the mounting bracket by pulling out on the handle so even if you had a clearance issue…
Frank, yes they do. What you're going to need is the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers #Y06180 which will work with the BaseLine towers and comes with the clip and landing pads. If you're looking for something else, feel…
Hey Robert, the Access tonneau cover part #A24AU can work with a ladder rack but it has to be one that attaches to the top of the bed rails and not one that wraps around them like the Yakima Overhaul. For a ladder rack that installs like that the…
Hey Justin, thanks for reaching out! I went out to the warehouse and confirmed that the Curt Adjustable 2-Ball Mount #C79NR measures 12-1/4" from the center of the hitch pin hole to the center of the hitch ball. Not sure what tape measure Curt…
Hey Nathan, Unfortunately there is not a standard size tire that comes on those trailers so I do not have a way of knowing exactly what size is on yours. You would need to measure the pilot diameter of the original wheels or the spindle on the axle…
Hey Kyle! We do have the B&W Tow & Stow Pintle Hook with 2" and 2-5/16" Balls. If you have a 2" hitch you need #BW67BR and for a 2-1/2" hitch #BW77BR. The pintle hook capacity on the 2" version is 16k and then 21k for…
Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…
Thanks for reaching out, Alex! The Yakima OutPost HD Overland Truck Bed Rack #Y01152-58 will be too short to fit the MOLLE Panel #Y98DJ, but you can use the SideBar Rails, Short Bed #Y01153 or Long Bed #Y01154, if you'd like to add some cargo…
Hey there Tim, either the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - Black #MA86JR or the MaxxAir FanMate RV and Trailer Roof Vent Cover - 26-1/2" x 18-1/8" x 10-1/4" - Black #MA00-955002 will fit your Maxxair fan model…
Yes, they will Aaron! The Inno Square Crossbars item #INB147 will indeed fit the older Thule 450 Crossroad roof rack. They measure 58" long x 7/8" tall x 1-1/4" wide, which is the same size but it doesn't have the track in the…
Hey Micah! Pacbrake has actually been around for a long time, more than 60 years. We have had customers ask for these air bags in the past, and we've seen them on vehicles coming in. Until now, Firestone has been the go to since their quality is…
The Yakima SideBar Rails cannot be cut as the assembly does in fact involve one bar sliding into the other like you mentioned and it would not be structurally sound, but there is a short bed version of these rails, which is the SideBar Rails for…
Hey Greg, what's interesting about the Ark Xtreme Off-Road Jack #ARK99FR that you referenced is that number you can adjust the height of the jack relative to the mounting bracket by pulling out on the handle so even if you had a clearance issue…
Frank, yes they do. What you're going to need is the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers #Y06180 which will work with the BaseLine towers and comes with the clip and landing pads. If you're looking for something else, feel…
Putco MOLLE Panels are a fantastic choice for those looking to maximize space and organization. Perfect for mounting Packouts, these panels are a bit of a splurge but offer a perfect fit and save tremendous time and space. Ideal for enthusiasts who value efficiency and organization.
Putco MOLLE Panels are designed to optimize space by allowing you to mount Packouts and other gear efficiently. They provide a perfect fit, making them a great investment for those who want to keep their vehicle organized and clutter-free, saving both time and space.
Absolutely! While they might feel like a splurge, the space-saving and organizational benefits they offer are invaluable. They are perfect for those who frequently need to organize and access their gear quickly and efficiently.
Putco MOLLE Panels are crafted with precision to ensure they fit seamlessly into your vehicle. This perfect fit not only enhances the aesthetic appeal but also ensures that your gear is securely mounted, providing peace of mind during travel.
By providing a dedicated space for mounting and organizing gear, Putco MOLLE Panels eliminate the hassle of searching for items. This streamlined organization means you can access what you need quickly, making them a time-saving solution for busy enthusiasts.
In real-world scenarios, Putco MOLLE Panels help keep your vehicle tidy and your gear easily accessible. Whether you're on a road trip or just running errands, having everything organized and within reach enhances your overall experience and efficiency.
Filters
