Hey Bryan, we don't have any license plate holders that were specifically designed for the 24x60 etrailer Enclosed Cargo Carrier for 2" Hitches #e54VV but I am sure you could make the LP10SB work which is a universal style license plate…
Hey Louis, thanks for stopping by! Since the Curt #C13105 and the etrailer #e98837 are basically the same hitch, it also is not going to be compatible with a hanging bike rack. Since this appears to be a trend with these bike racks, then I'd…
Good morning Elijah. You are in luck, because Aluma-Tow does a really nice job of building these 360 adjustable ball mounts with extremely tight tolerances, making sure they don't have much play or wobble. I've towed with some lower quality…
Good day Brooke! That's a valid question as we just started carrying the Aluma-Tow ball mounts (Aluma-Tow 360 Adjustable 2-Ball Mount - 2" Hitch Silver #UR45PR and Black#UR95PR). They are very comparable in quality to the Trimax Adjustable…
Hello Jackie, there are actually locks included in the Aluma-Tow adjustable 2" & 2-5/16" ball mount kits for 2" receivers: -silver #UR45PR -black #UR95PR There are actually 2 locking pins; 1 for the shank in the receiver, and 1 for…
Hey Ecimale, the Saris Edge Bike Rack part #SAR74YR that you referenced can be used with bikes that have fenders due to the angle the wheel clamp grabs the tire and the fact it's spring loaded. No need to buy an adapter! What kind of bike do you…
Of the 2 inch Curt hitches we offer for your 2017 Toyota Sienna the part #C13343 is the one to go with as it has only the hitch opening visible down below the bumper. The instructions do recommend removing the rear fascia to install the hitch. We…
The reason the part #76112 takes longer to install than the other hitches that fit your 2017 Toyota Sienna is that it installs higher than the other hitches and only has a visible hitch opening where the other hitches hang down further below. I…
When we installed the Curt hitch part #C13343 on a 2017 Toyota Sienna just like yours we found that from the top of the top of the hitch opening down to the ground measures 13 inches and then from the hitch pin hole out to the furthest point out on…
Hey Rebecca! Information is limited and isn't finalized yet from Trailer Valet since the #TV83FR is still a preorder. However, I was able to find that the full height of the jack when it is retracted is 33" from the wheels to the top. I also…
I am attaching a picture of the instructions for your application to the product page. The instructions say to put the jack in the proper location for your trailer application, then weld on both sides of the jack length using a 3/16 inch fillet…
Hey Walter, the Karrier tires part #AM10210 and #KE78KV both are really similar tires from Karrier. They both have same speed rating of 81 mph, Load Range of D, and weight capacity of 1,650 lbs. The only really noteworthy difference is the tread…
Hey Bryan, we don't have any license plate holders that were specifically designed for the 24x60 etrailer Enclosed Cargo Carrier for 2" Hitches #e54VV but I am sure you could make the LP10SB work which is a universal style license plate…
Hey Louis, thanks for stopping by! Since the Curt #C13105 and the etrailer #e98837 are basically the same hitch, it also is not going to be compatible with a hanging bike rack. Since this appears to be a trend with these bike racks, then I'd…
Good morning Elijah. You are in luck, because Aluma-Tow does a really nice job of building these 360 adjustable ball mounts with extremely tight tolerances, making sure they don't have much play or wobble. I've towed with some lower quality…
Good day Brooke! That's a valid question as we just started carrying the Aluma-Tow ball mounts (Aluma-Tow 360 Adjustable 2-Ball Mount - 2" Hitch Silver #UR45PR and Black#UR95PR). They are very comparable in quality to the Trimax Adjustable…
Hello Jackie, there are actually locks included in the Aluma-Tow adjustable 2" & 2-5/16" ball mount kits for 2" receivers: -silver #UR45PR -black #UR95PR There are actually 2 locking pins; 1 for the shank in the receiver, and 1 for…
Hey Ecimale, the Saris Edge Bike Rack part #SAR74YR that you referenced can be used with bikes that have fenders due to the angle the wheel clamp grabs the tire and the fact it's spring loaded. No need to buy an adapter! What kind of bike do you…
Of the 2 inch Curt hitches we offer for your 2017 Toyota Sienna the part #C13343 is the one to go with as it has only the hitch opening visible down below the bumper. The instructions do recommend removing the rear fascia to install the hitch. We…
The reason the part #76112 takes longer to install than the other hitches that fit your 2017 Toyota Sienna is that it installs higher than the other hitches and only has a visible hitch opening where the other hitches hang down further below. I…
When we installed the Curt hitch part #C13343 on a 2017 Toyota Sienna just like yours we found that from the top of the top of the hitch opening down to the ground measures 13 inches and then from the hitch pin hole out to the furthest point out on…
Hey Rebecca! Information is limited and isn't finalized yet from Trailer Valet since the #TV83FR is still a preorder. However, I was able to find that the full height of the jack when it is retracted is 33" from the wheels to the top. I also…
I am attaching a picture of the instructions for your application to the product page. The instructions say to put the jack in the proper location for your trailer application, then weld on both sides of the jack length using a 3/16 inch fillet…
Hey Walter, the Karrier tires part #AM10210 and #KE78KV both are really similar tires from Karrier. They both have same speed rating of 81 mph, Load Range of D, and weight capacity of 1,650 lbs. The only really noteworthy difference is the tread…
I found that ordering through this website as being helpful, acurate and efficient. Would highly recommend it to anyone else that needed this type of service.
Enhance Your Ride with Stylish License Plates and Frames
License plates and frames are a great way to add a personal touch to your vehicle. Whether you're looking for a sleek, polished look or something more rugged, there's a style for everyone. Consider the material, design, and durability when choosing the pe
Yes, many frames offer customizable options like logos or personalized text. This allows you to match the frame to your vehicle's brand or add a personal touch. Just ensure the customization is durable and won't peel or fade over time.
Check the dimensions and mounting hole placements to match your vehicle's specifications. Many frames are designed to be universal, but it's always good to double-check to avoid any fitment issues. A snug fit ensures the frame stays secure and looks great.
Regular cleaning with mild soap and water keeps frames looking new. Avoid harsh chemicals that can damage the finish. For metal frames, a quick polish can restore shine, while plastic frames benefit from a gentle wipe to prevent scratches.
Stainless steel and solid metal frames are popular for their durability and polished look. They resist fading and cracking, even under harsh conditions. If you're looking for something lightweight, consider high-quality plastic, but metal frames often provide a more premium feel.
Look for frames with a solid construction and high-quality finishes. Stainless steel and chrome are excellent for resisting rust and corrosion. Also, consider frames with reinforced corners or edges to withstand impacts and maintain their appearance over time.
Filters
