Hey Jeff. We've got a couple of options to add a Jerry Can holder to your 2024 Jeep Wrangler JL. They are the MORryde Jerry Can Mount for Jeep Wrangler JL - Driver Side item #MR27UR and Passenger Side item #MR87UR. These mount forward of your…
To flat tow your 2024 Jeep Wrangler 4xe you will need a base plate, tow bar, safety chains, wiring, and supplemental braking system. I recommend the following parts: -Roadmaster Direct-Connect Base Plate Kit #RM-521453-5 -Roadmaster BlackHawk 2 All…
Hey Scott, we have the Roadmaster Direct Connect base plate kit part #RM-521453-5 that is a confirmed fit for your 2024 Jeep Wrangler 4xE and would work great. In addition to the base plates, you will also need a compatible tow bar, safety cables,…
Hi Nathan, The Rhino-Rack Roof Rack Legs #RRRL110S5-2 are a fit for the gutters on your 2023 Jeep Wrangler, but they are only 4-5/16" tall so you'd likely run into clearance issues with the sky top. To confirm you can measure up 4-5/16"…
The Curt TruTrack Weight Distribution System part #C17500 which is rated for up to 10,000 lbs gross trailer weight and 1,000 lbs tongue weight would work but it wouldn't perform as well as the Curt TruTrack Weight Distribution System part #C17499…
When choosing a weight distribution system you wan't to find a system that is rated properly for your loaded tongue weight. You want the loaded tongue weight to fall in the center of the range that the weight distribution system spring bars are…
To add a front mount trailer hitch to your 2002 Jeep TJ with a tube style front bumper you will need to use Curt front mount hitch #C31028. It attaches to the frame of the Jeep and will sit underneath your front bumper.
The best hitch for your 2022 Jeep Grand Cherokee L is going to be the Curt item #C96NR you were looking at. This hitch is custom fit and bolts to your Jeep with included hardware. I really like this hitch because it mounts behind your Jeep's rear…
I'd be happy to help you get your 2023 Jeep Grand Cherokee L set up for towing a travel trailer with brakes! In addition to your trailer hitch you'll need a 4-Way, a 7-Way, and a brake controller like you mentioned. For this I recommend the…
A trailer hitch extender, such as the Curt #C45791 for 8 inches of extension, can be used with your Thule swinging bike rack like the Apex Swing #TH9027XT. You just need to keep in mind that using a hitch adapter will reduce the trailer hitch…
Hey James, welcome back! The only plug and play wiring harness I have for flat towing is the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR. This has a 4-way connector that plugs into your motorhome. This plug and play harness…
The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN
Jeep Storage with RotopaX Mounts for Off-Road
Set up a rotopax mount to carry fuel or water where it's easy to reach on the trail. Pick driver- or passenger-side brackets matched to JK/JKU or JL body styles; the passenger-side antenna area isn't confirmed with aftermarket antennas. Strong steel construction feels very sturdy, and installation can be straightforward with metric tools. No confirmed weight capacity, but testing included two 2gal RotopaX cans and 5 gal Jerry cans at about 40lbs.
Installation is generally straightforward. Have metric tools ready and plan for two people to set the J-hook during mounting. Take your time aligning to the factory holes and snug hardware evenly for a sturdy result.
Some RotopaX mounts do not list a confirmed capacity. There are tests mentioned with two 2 gal RotopaX cans and with a 5 gal jerry can about 40 lbs, but verify for your specific mount. Check your can size and total filled weight, and avoid exceeding what the mount and fender area can support.
It's not confirmed with aftermarket antennas. Clearance isn't tested for every antenna, so it may fit, require modifications, or not work. If space is tight, plan to test-fit carefully or switch back to the factory antenna to ensure the RotopaX mount sits correctly.
Yes, but match the RotopaX mount to your Jeep generation and the exact side. JK/JKU and JL use different side-specific brackets. JL production started in 2018, so confirm your model year. Passenger-side mounts may have an antenna cutout—verify your antenna setup before ordering.
Filters
