The etrailer E-Track Roller Idler #e67HR is 3" from the top of the e-track to the bottom of the roller.

With an EZ-Lube or Posi-Lube axle, you do not have to take apart the hubs to re-pack the bearings. You are absolutely correct that all you need to do is use the grease zerk and add LubriMatic LMX Industrial Strength Grease #L11390 or LubriMatic…

Yes, The Bearing Buddy #BB2717SS will be the correct size for hubs with the 2.72" dust caps. This is a fairly common size found on 5,200-lb to 7,000-lb rated axles.

The CE Smith Outrigger Poles #CE56510 comes with 2 poles, each have a removable aluminum sleeve pre-installed on the base. With the sleeve installed, the outer diameter of the base is 1-5/8", which allows the pole to…

All of our regulators like the MB Sturgis Vertical 2-Stage Propane Regulator #108220 are going to come from the factory preset at 11" water column for pressure. This particular regulator like most is adjustable so you…

Yes, the #100019-24 pigtail can be used to connect your dual-cylinder 100 lb propane setup to the regulator on your RV. Since this hose does not have a back-check to contain a gas leak, you will need the #204120-MBS fitting that includes a…

Sorry Frank, I'm a little confused and think you may have put in the wrong number as I do not see anything coming up as a Demco 6170. If you are referring to the Head and Base Assembly #DM6107 then yes you will be able…

The Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 60" Ramp #FHG99ZR weighs about 42 lbs.

The AO Coolers Fish Cooler Bag #AM57NR weighs 18-lbs. This cooler bag also measures 7" long, 48" wide, 26" tall and is reinforced with…

I have a solution for you, but the Viking Solutions Rack Jack #310-VMH001 hoist is secured via bolt on to the lower tube and there are no additional mounting holes on that lower tube it without voiding any warranty or compromising the integrity of…

You can expect the installation of the #C59236 in the 2023 Palisade video to be almost identical to your 2022 Hyundai Tucson. I'm not sure if the tail light style varies so removal may be a little different but the rest…

I hope I got the right measurement for you Roberto. I included a image with the measurement points that I took on the CargoBuckle Ladder Rack Straps #CB32MR below. If you are needing a different measurement please let me know.