Horse Trailer Accessories - High Country Plastic

Hey Joanne, I think I've found what you're looking for with the Surehoof Ribbed Rubber Trailer Mat #4872SM. This measures 48" x 72" which I would think is enough to cover your ramp and help your horse feel a little more comfortable…

While we do have a U.S.A. made option, the Bulldog Winch #BDW15018 is made in China. For a great American alternative, the highest capacity U.S.A. made winch we have is the Dutton-Lainson StrongArm Electric Winch w/ Pulley Block, AC Powered #DL24876.…

For your application I recommend checking out the Black Armour Heavy-Duty Trailer Mat #BA96AR which measures 5' wide x 7' long and is 1/2" thick. This is a pretty hefty mat and weighs in at 110 and is backed by a limited lifetime…

The Trailer Horse Pad Screw #PS-8 will allow you to install the 60" Horse Trailer Side Pad #HTP1260BK on your steel trailer/divider. This screw is 3/4" long and will require a 1/8" pilot hole on your steel trailer. I recommend using at…

Are the holes you are referring to threaded? If so then you could drill a 1/4" hole into one of our pads (see below) and then use a bolt to attach them to the wall. If the holes are not threaded then it may just be best to use a few phillips…

We do have a selection of rubber mats that you can add to your gooseneck trailer which I have linked for you to filter through. The thickest rubber mat that we currently have to offer is the Ribbed Rubber Trailer Mat #4872SM. This mat measures…

The Dometic 300 Toilet, #DOM64FR has a total length of 19-3/4" with a minimum distance from wall to center of 8-1/2". The Dometic 320, #DOM87FR is overall length of 22" with a minimum distance from wall to center of 11". If you…

The best option we have for your 7' x 12' V-Nose trailer is the Adco SFS AquaShed Trailer Cover item #290-46002. This cover is 12' long x 8' 10" wide x 7' 10" tall. This cover has integrated straps and ropes to prevent…

The holes to attach the Horse Trailer Side Pad part #HTP60BK do need to be drilled but that is standard from the other horse trailer side pads I have researched. We do not carry the screws by the box but the screws that we recommend can be purchased…

When replacing your horse trailer pads, be sure to pad all dividers and walls. The pads are constructed of a very durable vinyl sewn over 2" of foam onto rigid cardboard. They stand the test of time and hold up in all climates. There is no need…

Yes, the Dexter Self-Contained Hydraulic Jack #DX72CR does come with a manual hand pump that can be used as a backup in the event of hydraulic malfunction.

No, I would not recommend using it as a step. The etrailer Trailer Tool Box item #e44VV was not designed to hold weight on top of the box. We have one here installed on a trailer and while it is solidly designed the top is not reinforced to withstand…