Jacob, the only difference is the range. The #WS52ER gives you up to 6 inch of drop, while the #WS97WR goes to 8. Both are built on a 2.5 inch shank, both are rated 22K GTW / 2,200 lbs tongue weight, and both include the pintle plus 2 inch and 2-5/16…
The #BWGNRM1067 is just the rail kit and does not come with the center hitch section. The part number you need instead that comes with everything is the part #BWGNRK1067. This is rated for towing a trailer up to 30,000 lbs. The vertical weight…
It looks like the 2012 Chevy Silverado 2500/3500 use B&W hitch #BWGNRK1012. The installation kit does not fit the 2017 Silverado though. For your 2017 Chevy Silverado 2500/3500 you would need #BWGNRK1016 for the full kit if you don't want to…
To add a 7-Way connector to the bed of your 2024 Chevy Silverado 2500, I recommend the Draw-Tite 5th Wheel/Gooseneck Wiring Harness item #20110. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your…
Yes, you can reuse the center section of the B and W gooseneck hitch you have with the correct bracket kit #BWGNRM1012 and you'd be set. This is the bracket kit that your 2015 Chevy Silverado 2500HD uses.
...have the in-bed puck system from the factory then you will have to go with a gooseneck/turnoverball hitch, like # BWGNRK1020-5W, or a set of base rails, like # BWRVK2505, since there isn't an aftermarket...
The clearance between the bottom of a 5th wheel overhang and the truck bed is going to depend on several factors including the ride height of the truck, the height setting on the pin box on the trailer and the height setting on the 5th wheel hitch.…
I would be happy to! To keep your rear end from sagging when you're pulling a trailer or hauling a load in your 2021 Ram 1500 bed, I recommend the SumoSprings Solo Custom Helper Springs item #SSR-307-47. These have a 1,500 lbs load leveling…
Hey Tim, I got your picture and it does look like you do have a little bit of sag while hooked up to your trailer. An easy way to see how much sag you're getting is to measure from the ground up to the center of the wheel well while unloaded and…
If you were to place 1,500 lbs into the bed of your 2017 Ram 1500, you would experience less squat using the Timbren Rear Suspension Enhancement System part #TDR1500DQ than the SumoSprings Solo Custom Helper Springs part #SSR-307-47. However, as you…
For your 2021 Ram 1500 Crew Cab, between the Timbren Rear Suspension Enhancement System #TDR1500DQ, 1,000 lb capacity SumoSprings Solo Custom Helper Springs #SSR-307-40, and 1,500 lb SumoSprings Solo Custom Helper Springs #SSR-307-47, the option I…
Jacob, the only difference is the range. The #WS52ER gives you up to 6 inch of drop, while the #WS97WR goes to 8. Both are built on a 2.5 inch shank, both are rated 22K GTW / 2,200 lbs tongue weight, and both include the pintle plus 2 inch and 2-5/16…
The #BWGNRM1067 is just the rail kit and does not come with the center hitch section. The part number you need instead that comes with everything is the part #BWGNRK1067. This is rated for towing a trailer up to 30,000 lbs. The vertical weight…
It looks like the 2012 Chevy Silverado 2500/3500 use B&W hitch #BWGNRK1012. The installation kit does not fit the 2017 Silverado though. For your 2017 Chevy Silverado 2500/3500 you would need #BWGNRK1016 for the full kit if you don't want to…
To add a 7-Way connector to the bed of your 2024 Chevy Silverado 2500, I recommend the Draw-Tite 5th Wheel/Gooseneck Wiring Harness item #20110. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your…
Yes, you can reuse the center section of the B and W gooseneck hitch you have with the correct bracket kit #BWGNRM1012 and you'd be set. This is the bracket kit that your 2015 Chevy Silverado 2500HD uses.
...have the in-bed puck system from the factory then you will have to go with a gooseneck/turnoverball hitch, like # BWGNRK1020-5W, or a set of base rails, like # BWRVK2505, since there isn't an aftermarket...
The clearance between the bottom of a 5th wheel overhang and the truck bed is going to depend on several factors including the ride height of the truck, the height setting on the pin box on the trailer and the height setting on the 5th wheel hitch.…
I would be happy to! To keep your rear end from sagging when you're pulling a trailer or hauling a load in your 2021 Ram 1500 bed, I recommend the SumoSprings Solo Custom Helper Springs item #SSR-307-47. These have a 1,500 lbs load leveling…
Hey Tim, I got your picture and it does look like you do have a little bit of sag while hooked up to your trailer. An easy way to see how much sag you're getting is to measure from the ground up to the center of the wheel well while unloaded and…
If you were to place 1,500 lbs into the bed of your 2017 Ram 1500, you would experience less squat using the Timbren Rear Suspension Enhancement System part #TDR1500DQ than the SumoSprings Solo Custom Helper Springs part #SSR-307-47. However, as you…
For your 2021 Ram 1500 Crew Cab, between the Timbren Rear Suspension Enhancement System #TDR1500DQ, 1,000 lb capacity SumoSprings Solo Custom Helper Springs #SSR-307-40, and 1,500 lb SumoSprings Solo Custom Helper Springs #SSR-307-47, the option I…
Turnoverball Gooseneck: The Ultimate Towing Solution
Turnoverball Gooseneck kits are a top choice for enthusiasts seeking reliable towing solutions. Known for their perfect fit and ease of installation, these kits are ideal for those who value quality and performance. With clear instructions and robust desi
While most kits fit as advertised, it's crucial to verify compatibility with your specific vehicle model. Some have noted discrepancies in fitment information, so double-checking with the manufacturer or seller is recommended.
Typically, these kits include all required hardware. However, there have been instances where hardware was missing. It's advisable to confirm the contents upon receipt and contact the manufacturer if anything is missing.
Installation is straightforward with clear instructions provided. Many find it easier than expected, often completing it in an afternoon with minimal tools. Some use creative solutions like ratchet straps for extra hands, making it a manageable DIY project.
These kits are praised for their perfect fit and robust construction. They are designed to integrate seamlessly with your vehicle, providing a reliable towing solution. The USA-made quality and top-notch customer support add to their appeal.
Ensure you follow the installation instructions carefully to avoid damaging nearby parts like wires or fluid lines. The kits are designed for a snug fit, so proper alignment is key to a successful installation and optimal performance.
Filters
